Access -> Opening and Closing for Your Peugeot 1007 4 Door First Generation (2005-2009)

4
If the deadlocking is opera-  
ted from inside the vehicle, it  
will change to normal locking  
when the vehicle is started.  
Locating your vehicle  
To locate your vehicle, if you have  
locked it, in a car park:  
Deadlocking  
Deadlocking renders the internal and  
external door controls inoperative.  
It also deactivates the internal central  
locking button.  
press button B, the courtesy  
lights come on and the direction  
indicators flash for a few  
seconds.  
Whenclosingthewindowsand  
sunroof using the remote con-  
trol, the user must ensure that  
no one is preventing correct  
closing of the windows and sunroof.  
Never leave anyone inside the  
vehicle when it is deadlocked.  
Using the remote control  
Pressing button B locks the vehicle  
orpressing button B for more  
than 2 seconds permits automatic  
clo-sing of the windows and sunroof  
in addition to locking.  
A second press within five seconds  
deadlocks the vehicle.  
Key in ignition  
Abuzzer sounds on opening the driver’s  
door, if the key has been left in the  
ignition.  
Opening/Closing the  
"Sesame" doors  
Pressing button D or E opens or  
Each action is confirmed by fixed  
lighting of the direction indicators for  
approximately two seconds.  
closes the left or right door.  
This press unlocks the vehicle before  
opening the corresponding door.  
Asecond press stops the movement  
Using the key  
of the corresponding door.  
Turn the key in the lock on the driver’s  
door to lock the vehicle.  
Within the next five seconds, turn the  
Athirdpressreversesthemovement  
of the corresponding door.  
key again to deadlock the vehicle.  
Each action is confirmed by fixed  
lighting of the direction indicators for  
approximately two seconds.  
73  
4
Programming the remote  
control  
ELECTRONIC ENGINE  
IMMOBILISER  
Following changing of the remote  
control battery or disconnection of  
the vehicle battery, the remote control  
must be reprogrammed.  
This locks the engine control system  
a few moments after the ignition has  
been switched off and therefore pre-  
vents starting of the vehicle by any-  
one who does not have the key.  
The ignition key has an electronic  
chip which has a special code. When  
the ignition is switched on, the code is  
recognised and starting is possible.  
If the system does not function  
correctly, the service warning light  
comes on, accompanied by an  
audible signal and a message on the  
multifunction display.  
In this case, your vehicle will not  
start. Contact a PEUGEOT dealer as  
soon as possible.  
Wait at least one minute before  
using the remote control.  
Switch on the ignition.  
Press button B or C for at least  
five seconds within the next ten  
seconds.  
Switch off the ignition.  
Wait at least one minute before  
using the remote control.  
Changing the remote control  
battery  
Battery ref.: CR1620/3 volts.  
The remote control is now working  
again.  
The information "battery flat" is given  
by displaying of the service warning  
light, accompanied by an audible  
signal and a message on the multi-  
function display.  
To replace the battery, unclip the  
casing using a coin at the notch.  
Lost keys  
Visit a PEUGEOT dealer with the  
vehicle’s V5 registration certificate  
and your personal identification docu-  
ments.  
A PEUGEOT dealer will be able to  
retrieve the key code and the trans-  
ponder code required to order a  
replacement key.  
If the remote control does not work  
after the battery has been changed,  
re-programme the remote control.  
74