2019-2025 Peugeot 2008 SUV Instruments User Manual

MY CAR USER MANUAL

Instruments for Your Peugeot 2008 SUV Second Generation (2019-2025)

Instruments  
6. Engine oil level indicator (depending on  
engine)  
5. Fuel gauge (Petrol or Diesel)  
LCD instrument panel  
1
Charge level indicator (Electric)  
Service indicator, then total distance recorder  
(miles or km)  
These functions are displayed in turn when  
the ignition is switched on.  
Dials  
Matrix display  
7. Trip computer information  
1. Analogue speedometer (mph or km/h)  
2. LCD display  
3. Rev counter (x 1,000 rpm), graduation  
depends on the engine (Petrol or Diesel)  
Matrix instrument panel  
Dials  
LCD display  
1. Coolant temperature indicator (°C) (Petrol or  
Diesel)  
Thermal comfort consumption indicator  
(Electric)  
2. Analogue speedometer (mph or km/h)  
3. Matrix display  
4. Rev counter (x 1,000 rpm), graduation  
depends on the engine (Petrol or Diesel)  
Power indicator (Electric)  
1. Cruise control / speed limiter settings  
Display of speed limit signs  
2. Gear shift indicator (arrow and recommended  
gear)  
1. Cruise control/speed limiter settings  
Display of speed limit signs  
2. Digital speedometer (mph or km/h)  
3. Driving mode selected  
4. Gear shift indicator  
Selector position and gear on automatic  
gearbox  
5. Fuel gauge  
Selector position and gear on automatic  
gearbox (Petrol or Diesel)  
Drive selector position (Electric)  
9
Instruments  
• Information related to the gearbox and gear  
shift indicator (Petrol or Diesel).  
• Information related to the drive selector  
(Electric).  
• Fuel gauge (Petrol or Diesel).  
• Range (Petrol or Diesel).  
• Coolant temperature indicator (Petrol or  
Diesel).  
• Charge level and range indicator (Electric).  
• Power indicator (Electric).  
• Driving mode.  
– in variable locations:  
• Digital speedometer.  
3. Digital speedometer (mph or km/h)  
Display of driving aids  
1. Fuel gauge (Petrol or Diesel)  
Charge level indicator (Electric)  
2. Remaining range (miles or km)  
3. Cruise control/speed limiter settings  
Display of speed limit signs  
4. Digital speedometer (mph or km/h)  
5. Total distance recorder (miles or km)  
6. Rev counter (x 1,000 rpm) (Petrol or Diesel)  
Power indicator (Electric)  
Trip computer information  
Power flow / vehicle charge state (Electric)  
4. Service indicator, then total distance recorder  
(miles or km)  
Remaining range (Electric)  
These functions are displayed in turn when  
the ignition is switched on.  
Driving mode selected (other than "Normal"  
mode)  
7. Gear shift indicator (arrow and recommended  
gear)  
Selector position and gear on automatic  
gearbox (Petrol or Diesel)  
Drive selector position (Electric)  
Driving mode selected (other than "Normal"  
mode)  
• Total distance recorder.  
• Status or alert messages displayed  
temporarily.  
Digital instrument panel  
This head-up 3D digital instrument panel can be  
personalised.  
Depending on the display mode selected, some  
information is hidden or presented differently.  
Example with the "DIALS" display mode:  
8. Coolant temperature indicator (°C) (Petrol or  
Diesel)  
9. Analogue speedometer (mph or km/h) (Petrol  
or Diesel)  
Optional information  
Depending on the selected display mode and  
active features, additional information may be  
displayed:  
– Rev counter (Petrol or Diesel).  
– Trip computer.  
– Driving aid functions.  
– Speed limiter or cruise control.  
– Media currently playing.  
– Navigation instructions.  
Displays  
Some lamps have a fixed location, others can  
change location.  
For certain functions that have indicator lamps  
for both operation and deactivation, there is only  
one dedicated location.  
– Analogue speedometer.  
– Engine information (G-meters, Power-meters,  
Boost, Torque) in Sport mode.  
– Energy flows (Electric).  
Permanent information  
In the standard display, the instrument panel  
shows:  
– in fixed locations:  
10  
Instruments  
• fuel gauge and coolant temperature indicator  
(Petrol or Diesel).  
• battery charge level indicator (Electric).  
– "Energy": specific display, showing a visual  
representation of the vehicle’s energy flows  
(Electric).  
Customising the instrument  
panel  
Depending on version, the appearance of the  
instrument panel may be customisable (colour  
and/or display mode).  
1
– "Personal 1"/"Personal 2": display showing  
information selected by the driver in the central  
part of the instrument panel.  
Display language and units  
These depend on the touch screen  
settings.  
Configuring a "Personal" display mode  
When travelling abroad, the speed must be  
shown in the official units of the country you  
are driving in (mph, miles or km/h, km).  
With PEUGEOT Connect Radio  
► Press Settings in the banner of the  
touch screen.  
► Turn the thumbwheel on the left of the  
steering wheel to display and scroll through the  
various modes on the instrument panel.  
► Press the thumbwheel to confirm the mode.  
If you do not press the thumbwheel, the selected  
display mode is automatically applied after a few  
moments.  
As a safety measure, these adjustments  
must be carried out with the vehicle  
stationary.  
► Select "Configuration".  
► Select "Instrument panel  
personalisation".  
With PEUGEOT Connect Nav  
► Press Settings in the banner of the  
touch screen.  
Display modes  
Choice of display colour (Petrol or  
Diesel)  
Depending on version, the instrument panel  
display colour depends on the colour scheme  
chosen in this system.  
– "Dials": standard display of analogue and  
digital speedometers, total distance recorder  
and:  
• fuel gauge, coolant temperature indicator  
and rev counter (Petrol or Diesel).  
► Select "OPTIONS".  
► Select "Instrument panel  
personalisation".  
► Select "Personal 1" or "Personal 2".  
► Select the type of information using the scroll  
arrows on the touch screen:  
• "Default" (empty).  
• "Trip computer".  
• "Media".  
• "G-metres" (depending on version).  
• "Power-meters + Boost + Torque"  
(depending on version).  
The settings are changed via the  
Settings touch screen menu.  
• battery charge level indicator and power  
indicator (Electric).  
Choosing the display mode  
In each mode, specific types of information are  
displayed on the instrument panel.  
– "Navigation": specific display, showing current  
navigation information (map and instructions).  
– "Driving": specific display, showing  
information relating to active driving aid systems.  
– "Minimum": 2D display with digital  
speedometer, total distance recorder and:  
11  
Instruments  
• "Accessories consumption" (depending on  
version).  
► Confirm to save and exit.  
The information is displayed immediately on the  
instrument panel if the corresponding display  
mode is selected.  
When the ignition is switched on  
List of warning and  
indicator lamps  
Certain red or orange warning lamps come on  
for a few seconds when the ignition is switched  
on. These warning lamps should go off as soon  
as the engine is started.  
For more information on a system or a function,  
refer to the corresponding section.  
Red warning/indicator lamps  
STOP  
Fixed, associated with another warning  
lamp, accompanied by the display of a  
message and an audible signal.  
A serious fault with the engine, braking system,  
power steering or automatic gearbox or a major  
electrical fault has been detected.  
Carry out (1) and then (2).  
The type of information selected in  
"Personal 1" mode is not available in  
"Personal 2" mode.  
Persistent warning lamp  
If a red or orange warning lamp comes on, there  
may be fault which needs further investigation.  
If a lamp remains lit  
Warning and indicator  
lamps  
Displayed as symbols, the warning and indicator  
lamps inform the driver of the occurrence of a  
malfunction (warning lamps) or of the operating  
status of a system (operation or deactivation  
indicator lamps). Certain lamps light up in two  
ways (fixed or flashing) and/or in several colours.  
Engine self-diagnostic system (Petrol or  
Diesel)  
The references (1), (2) and (3) in the warning  
and indicator lamp description indicate whether  
you should contact a qualified professional in  
addition to the immediate recommended actions.  
(1): You must stop the vehicle.  
Stop as soon as it is safe to do so and switch off  
the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Go to a PEUGEOT dealer or a qualified  
workshop.  
Fixed.  
A major engine fault has been  
detected.  
Carry out (1) and then (2).  
Maximum coolant temperature (Petrol or  
Diesel)  
Fixed with display blocks lit in red  
(with matrix instrument panel).  
or  
Fixed (except on matrix instrument panel).  
The temperature of the cooling system is too  
high.  
Carry out (1), then wait until the engine has  
cooled down before topping up the level, if  
necessary. If the problem persists, carry out (2).  
Associated warnings  
The illumination of a lamp may be accompanied  
by an audible signal and/or a message displayed  
in a screen.  
Relating the type of alert to the operating status  
of the vehicle allows you to determine whether  
the situation is normal or whether a fault has  
occurred: refer to the description of each lamp  
for further information.  
12  
Instruments  
With an automatic gearbox or drive selector,  
select mode P.  
Switch off the ignition and carry out (2).  
Engine oil pressure (Petrol or Diesel)  
Fixed.  
There is a fault with the engine lubrication  
system.  
► With the EAT8 automatic gearbox or drive  
selector, fit the chock against one of the wheels.  
Clean and tighten the terminals. If the warning  
lamp does not go off when the engine is started,  
carry out (2).  
1
Braking  
Carry out (1) and then (2).  
Fixed.  
System malfunction (Electric)  
Fixed.  
A fault involving the electric motor or  
traction battery has been detected.  
Carry out (1) and then (2).  
Door(s) open  
The brake fluid level in the braking circuit  
has dropped significantly.  
Carry out (1), then top up with fluid that complies  
with the manufacturer's recommendations. If the  
problem persists, carry out (2).  
Fixed.  
The electronic brake force  
distribution (EBFD) system is faulty.  
Carry out (1) and then (2).  
Fixed, associated with a message  
identifying the access.  
A door or the tailgate is not properly closed  
(speed less than 6 mph (10 km/h)).  
Fixed, associated with a message  
identifying the access, accompanied by  
an audible signal.  
Cable connected (Electric)  
Fixed when the ignition is switched on.  
The charging cable is connected to the  
vehicle's connector.  
Fixed when the ignition is switched on,  
accompanied by a message.  
It is not possible to start the vehicle while the  
charging cable is connected to the vehicle’s  
connector.  
A door or the tailgate is not properly closed  
(speed above 6 mph (10 km/h)).  
Orange warning/indicator lamps  
Seat belts not fastened/unfastened  
Fixed or flashing, accompanied by an  
increasing audible signal.  
A seat belt has not been fastened or has been  
unfastened.  
Service  
Temporarily on, accompanied by the  
display of a message.  
One or more minor faults, for which there is/are  
no specific warning lamp(s), have been detected.  
Identify the cause of the fault using the message  
displayed on the instrument panel.  
You may be able to deal with some faults  
yourself, such as changing the battery in the  
remote control.  
For other faults, such as with the tyre under-  
inflation detection system, carry out (3).  
Fixed, accompanied by the display of a  
message.  
Disconnect the charging cable and close the  
flap.  
Manual parking brake  
Fixed.  
The parking brake is applied or not  
properly released.  
12V battery charge  
Fixed.  
The battery charging circuit is faulty  
(e.g. dirty terminals, loose or severed alternator  
belt).  
Carry out (1).  
If the electric parking brake stops working,  
immobilise the vehicle:  
► With the manual gearbox, engage a gear.  
► With the EAT6 automatic gearbox, move the  
gear selector to position P.  
Electric parking brake  
Fixed.  
The electric parking brake is applied.  
Flashing.  
Application/release is faulty.  
Carry out (1): park on flat ground (on a level  
surface).  
One or more major faults, for which there is/are  
no specific warning lamp(s), have been detected.  
With a manual gearbox, engage a gear.  
13  
Instruments  
Identify the cause of the fault using the message  
displayed on the instrument panel, then carry  
out (3).  
Fixed, accompanied by the message  
"Parking brake fault".  
Automatic release of the electric parking brake is  
unavailable.  
Particle filter (Diesel)  
Fixed, accompanied by an audible signal  
and a message about the risk of particle  
filter blockage.  
The particle filter is nearing saturation.  
As soon as traffic conditions permit, regenerate  
the filter by driving at a speed of at least 37 mph  
(60 km/h) until the warning lamp goes off.  
Fixed, accompanied by an audible signal  
and a message indicating that the additive  
level in the particle filter is too low.  
Never drive until completely empty, as  
this could damage the emissions control and  
injection systems.  
Low traction battery level (Electric)  
Fixed, accompanied by an audible signal.  
The state of charge of the traction battery  
is low.  
View the remaining range.  
Put the vehicle on charge as soon as possible.  
Carry out (2).  
Service warning lamp fixed and  
service spanner flashing then  
fixed.  
The servicing interval has been exceeded.  
The vehicle must be serviced as soon as  
possible.  
Tortoise mode with limited driving range  
(Electric)  
The low level in the additive tank has been  
reached.  
Top up without delay: carry out (3).  
Fixed.  
The state of charge of the traction battery  
is critical.  
The engine power gradually decreases.  
You must put the vehicle on charge.  
If the warning lamp remains lit, carry out (2).  
Only with BlueHDi Diesel engines.  
Low fuel level (Petrol or Diesel)  
Fixed, with the blocks lit red,  
accompanied by an audible signal  
(with the matrix instrument panel)  
or  
Fixed, with the reserve level shown in red,  
accompanied by an audible signal and the  
display of a message (except with the matrix  
instrument panel).  
When it first comes on, there remains  
approximately 5 litres of fuel in the tank  
(reserve).  
Until the fuel level is topped up, this alert will  
be repeated every time the ignition is switched  
on, with increasing frequency as the fuel level  
decreases and approaches zero.  
Refuel without delay to avoid running out of fuel.  
Engine pre-heating (Diesel)  
Temporarily on  
(up to approximately 30 seconds in  
severe weather conditions).  
When switching on the ignition, if the weather  
conditions and the engine temperature make it  
necessary.  
Wait until the warning lamp goes off before  
starting.  
When the warning lamp goes off, starting will  
occur immediately if you press and hold:  
– the clutch pedal with a manual gearbox.  
– the brake pedal with an automatic gearbox.  
If the engine does not start, make the engine  
starting request again, while keeping your foot  
on the pedal.  
Pedestrian horn (Electric)  
Fixed.  
Horn fault detected.  
Carry out (3).  
Engine self-diagnostic system (Petrol or  
Diesel)  
Flashing.  
The engine management system has a  
fault.  
There is a risk that the catalytic converter will be  
destroyed.  
You must carry out (2).  
Fixed.  
The emissions control system has a fault.  
14  
Instruments  
The warning lamp should go off when the engine  
is started.  
Carry out (3) without delay.  
Fixed.  
A minor engine fault has been  
detected.  
Carry out (3).  
AdBlue® (BlueHDi)  
On for around 30 seconds when starting  
the vehicle, accompanied by a message  
indicating the driving range.  
To restart the engine, top up the AdBlue® or carry  
Automatic functions deactivated (electric  
parking brake)  
1
out (2).  
It is essential to add at least 5 litres of AdBlue®  
Fixed.  
to the tank.  
The "automatic application" (on switching  
off the engine) and "automatic release" (on  
acceleration) functions are deactivated.  
If automatic application/release is no longer  
possible:  
► Start the engine.  
► Use the control to apply the electric parking  
brake.  
► Take your foot fully off the brake pedal.  
► Hold the control pressed in the release  
direction for between 10 and 15 seconds.  
► Release the control.  
► Depress and hold the brake pedal.  
► Pull the control in the application direction for  
2 seconds.  
SCR emissions control system (BlueHDi)  
Fixed when the ignition is switched  
on, accompanied by an audible  
signal and a message.  
A malfunction of the SCR emissions control  
system has been detected.  
This alert disappears once the exhaust  
emissions return to normal levels.  
The driving range is between 1,500 and 500  
miles (2,400 and 800 km).  
Top up the AdBlue®.  
Flashing AdBlue® warning lamp on  
switching on the ignition, with the  
Fixed, on switching on the ignition,  
accompanied by an audible signal and a  
message indicating the driving range.  
The driving range is between 500 and 62 miles  
(800 and 100 km).  
Promptly top up the AdBlue®, or carry out (3).  
Flashing, accompanied by an audible  
signal and a message indicating the  
driving range.  
The driving range is less than 62 miles (100 km).  
You must top up the AdBlue® to avoid engine  
starting being prevented, or carry out (3).  
Flashing, accompanied by an audible  
signal and a message indicating that  
starting is prevented.  
The AdBlue® tank is empty: the legally required  
engine immobiliser system prevents the engine  
from starting.  
Engine self-diagnostics warning lamp on fixed,  
accompanied by an audible signal and a  
message indicating the driving range.  
Depending on the message displayed, it is  
possible to drive for up to 685 miles (1,100 km)  
before the engine immobiliser is triggered.  
Carry out (3) without delay, to avoid starting  
being prevented.  
► Release the control and the brake pedal.  
Malfunction (with electric parking brake)  
Fixed, accompanied by the  
message "Parking brake fault".  
The vehicle cannot be immobilised with the  
engine running.  
If manual application and release commands are  
not working, the electric parking brake control is  
faulty.  
The automatic functions must be used at all  
times and are automatically reactivated in the  
event of a fault with the control.  
Carry out (2).  
Flashing AdBlue® warning lamp on  
switching on the ignition, with the  
Engine self-diagnostics warning lamp on fixed,  
accompanied by an audible signal and a  
message indicating that starting is prevented.  
The engine immobiliser prevents the engine from  
restarting (the permitted driving limit has been  
exceeded after confirmation of a malfunction of  
the emissions control system).  
To start the engine, carry out (2).  
15  
Instruments  
Fixed, accompanied by the  
message "Parking brake  
Fixed.  
The system has a fault.  
Emergency brake malfunction (with  
electric parking brake)  
fault".  
If these warning lamps come on after the engine  
is switched off and then restarted, carry out (3).  
Fixed, accompanied by the  
The electric parking brake is faulty: manual and  
automatic functions may not be working.  
When stationary, to immobilise the vehicle:  
► Pull the electric parking brake control and  
hold it for approximately 7 to 15 seconds, until  
the indicator lamp lights up on the instrument  
panel.  
If this procedure does not work, secure the  
vehicle:  
► Park on a level surface.  
message "Parking brake fault".  
Emergency braking does not deliver optimal  
performance.  
If automatic release is not available, use manual  
release or carry out (3).  
Anti-lock braking system (ABS)  
Fixed.  
The anti-lock braking system has a fault.  
The vehicle retains conventional braking.  
Drive carefully at moderate speed, then carry  
out (3).  
Hill start assist  
Fixed, accompanied by the  
message "Anti roll-back system  
fault".  
The system has a fault.  
Carry out (3).  
Power steering  
Fixed.  
The power steering has a fault.  
Drive carefully at moderate speed, then carry  
out (3).  
► With a manual gearbox, engage a gear.  
► With an automatic gearbox or drive selector,  
select P, then place the supplied chock against  
one of the wheels.  
Active lane departure warning system  
Fixed.  
The system has been automatically  
deactivated or placed on standby.  
Flashing.  
You are about to cross a broken  
lane marking without operating the direction  
indicators.  
The system is activated, then corrects the  
trajectory on the side of the detected lane  
marking.  
Dynamic stability control (DSC)/Anti-slip  
regulation (ASR)  
Then carry out (2).  
Fixed.  
Collision Risk Alert/Active Safety Brake  
Fixed, accompanied by the display of a  
message.  
The system has been deactivated via the touch  
screen (Driving/Vehicle menu).  
Flashing.  
The system activates and brakes the  
vehicle momentarily to reduce the speed of  
collision with the vehicle in front.  
For more information, refer to the Driving  
section.  
The system is deactivated.  
The DSC/ASR system is reactivated  
automatically when the vehicle is restarted,  
and at speeds above approximately 31 mph  
(50 km/h).  
At speeds below 31 mph (50 km/h), it can be  
reactivated manually.  
For more information, refer to the Driving  
section.  
Flashing.  
DSC/ASR system regulation is activated  
in the event of a loss of grip or trajectory.  
Fixed.  
The DSC/ASR system has a fault.  
Carry out (3).  
Fixed.  
The system has a fault.  
Carry out (3).  
Fixed, accompanied by a message and  
an audible signal.  
The system has a fault.  
Carry out (3).  
16  
Instruments  
Lane positioning assist  
Fixed, accompanied by the Service  
warning lamp.  
The system has a fault.  
Check the pressure of the tyres as soon as  
possible.  
Reinitialise the detection system after adjusting  
the pressure.  
Under-inflation warning lamp  
flashing then fixed and Service  
warning lamp fixed.  
Automatic headlamp dipping  
1
Fixed, accompanied by an audible signal  
and a message.  
A function or camera malfunction is detected.  
Carry out (2).  
Carry out (3).  
Airbags  
Rear foglamps  
Fixed.  
Fixed.  
The tyre pressure monitoring system is faulty.  
Under-inflation detection is no longer monitored.  
Check the tyre pressures as soon as possible  
and carry out (3).  
One of the airbags or seat belt  
pyrotechnic pretensioners is faulty.  
Carry out (3).  
The lamps are on.  
Green warning/indicator lamps  
Hill Assist Descent Control  
Fixed.  
Front passenger airbag (ON)  
Fixed.  
Stop & Start (Petrol or Diesel)  
Fixed, accompanied by the display of a  
message.  
The Stop & Start system has been deactivated  
manually.  
(grey)  
The front passenger airbag is activated.  
The control is set to the "ON" position.  
In this case, do not install a "rearward facing"  
child seat on the front passenger seat - risk  
of serious injury!  
The function has been activated, but is currently  
paused because the speed is too high.  
Reduce the vehicle speed to below 19 mph  
(30 km/h).  
The engine will not switch off at the next traffic  
stop.  
Fixed.  
Front passenger airbag (OFF)  
Fixed.  
The system has been activated, but the  
conditions for regulation are not met (gradient,  
speed too high, gear engaged).  
Flashing.  
The function is regulating the speed of the  
vehicle.  
Fixed.  
The Stop & Start system has been  
deactivated automatically.  
The engine will not switch off at the next traffic  
stop, if the exterior temperature is:  
– below 0°C.  
– above +35°C.  
For more information, refer to the Driving  
section.  
Flashing then fixed, accompanied by a  
message.  
The system has a fault.  
Carry out (3).  
The front passenger airbag is deactivated.  
The control is set to the “OFF” position.  
A "rearward facing" child seat can be installed,  
unless there is a fault with the airbags (Airbags  
warning lamp on).  
The vehicle is being braked; the brake lamps  
come on during the descent.  
Parking sensors  
Fixed, accompanied by an onscreen  
message and an audible signal.  
The system is deactivated.  
Stop & Start (Petrol or Diesel)  
Fixed.  
When the vehicle stops, the Stop & Start  
puts the engine into STOP mode.  
Flashing temporarily.  
Under-inflation  
Fixed.  
The pressure in one or more tyres is too  
low.  
STOP mode is momentarily unavailable  
or START mode is automatically triggered.  
17  
Instruments  
For more information, refer to the Driving  
Sidelamps  
Foot on the brake  
section.  
Fixed.  
Fixed.  
The lamps are on.  
Insufficient or no pressure on the brake  
Vehicle ready to drive (Electric)  
Fixed, accompanied by an audible signal  
when it comes on.  
The vehicle is ready to drive and the thermal  
comfort systems are available.  
The indicator lamp goes out upon reaching a  
speed of approximately 3 mph (5 km/h) and  
lights up again when the vehicle stops moving.  
The lamp will go out when you turn off the  
engine and exit the vehicle.  
pedal.  
Dipped beam headlamps  
Fixed.  
With the EAT6 automatic gearbox, with the  
engine running, before releasing the parking  
brake, to move out of position P.  
With the EAT8 automatic gearbox or the drive  
selector, it may be necessary to depress the  
brake pedal to unlock the gearbox from mode N.  
This warning lamp will remain on if you attempt  
to release the parking brake without depressing  
the brake pedal.  
The lamps are on.  
Automatic headlamp dipping  
Fixed.  
The function has been activated  
via the touch screen (Driving/Vehicle menu).  
The lighting control stalk is in the "AUTO"  
position.  
For more information, refer to the Lighting and  
visibility section.  
Park Assist  
Automatic gearbox (EAT8) or Drive  
selector (Electric)  
Fixed.  
The function is active.  
For more information, refer to the Driving  
section.  
Front foglamps  
Fixed.  
Fixed.  
The automatic gearbox is locked.  
The drive selector is locked.  
You must press the Unlock button to unlock it.  
The front foglamps are on.  
Lane positioning assist  
Fixed.  
The function has been activated.  
All conditions have been met: the system is  
operating.  
Blue warning/indicator lamps  
Water in Diesel fuel filter  
Main beam headlamps  
Fixed.  
Fixed (with LCD instrument panels).  
The Diesel fuel filter contains water.  
Carry out (2) without delay. Risk of damaging the  
fuel injection system!  
The lamps are on.  
For more information, refer to the Driving  
section.  
Black/white warning lamps  
Foot on the clutch (Petrol or Diesel)  
Fixed (with LCD instrument panels).  
Stop & Start: the change to START mode  
is rejected because the clutch pedal is not fully  
depressed.  
Automatic wiping  
Fixed.  
Indicators  
Automatic windscreen wiping is activated.  
Direction indicators  
Service indicator  
The servicing information is expressed in terms  
of distance (miles or kilometres) and time  
(months or days).  
Flashing with audible signal.  
The direction indicators are on.  
Fully depress the clutch pedal.  
18  
Instruments  
The alert is given at whichever of these two  
terms is reached first.  
The servicing information is displayed in the  
instrument panel. Depending on the version of  
the vehicle:  
– The distance recorder display line indicates  
the distance remaining before the next service  
is due, or the distance travelled since it was due  
preceded by the "-" sign.  
– An alert message indicates the distance  
remaining, as well as the period before the next  
service is due or how long it is overdue.  
Service spanner flashing  
Flashing then fixed, when the  
ignition is switched on.  
(With BlueHDi Diesel engines, associated with  
the Service warning lamp.)  
at least 5 minutes for the reset to be  
registered.  
1
Reminder of the servicing information  
You can view the servicing information by  
pressing the "Check" button in the  
Driving/Vehicle touch screen menu.  
The servicing interval has been exceeded.  
Have your vehicle serviced as soon as possible.  
Resetting the service indicator  
The service indicator must be reset after each  
service.  
If you have serviced your vehicle yourself:  
► Switch the ignition off.  
Engine oil level indicator  
(Depending on version)  
On versions fitted with an electric gauge, the  
engine oil level status is displayed on the  
instrument panel for a few seconds when  
the ignition is switched on, after the servicing  
information.  
The value indicated is calculated  
according to the distance covered and  
the time elapsed since the last service.  
The alert may also be triggered close to a  
due date.  
The level read will only be correct if the  
vehicle is on level ground and the engine  
has been off for more than 30 minutes.  
Service spanner  
On temporarily when the ignition is  
switched on.  
Low oil level  
Between 620 and 1,860 miles (1,000 and 3,000  
km) remain before the next service is due.  
Fixed, when the ignition is switched on.  
The next service is due in less than 620  
miles (1,000 km).  
This is indicated by the display of "OIL" or by  
the message "Oil level incorrect" (depending  
on the instrument panel), accompanied by the  
lighting of the Service warning lamp and an  
audible signal.  
If a low oil level is confirmed by a check using  
the dipstick, the level must be topped up to avoid  
damage to the engine.  
► Press and hold the button located on the end  
of the lighting control stalk.  
► Without pressing the brake pedal, press the  
START/STOP button once; a temporary display  
window appears and a countdown begins.  
► When the display indicates =0, release the  
lighting control stalk button; the spanner symbol  
disappears.  
Have your vehicle serviced very soon.  
For more information on Checking levels, refer  
to the corresponding section.  
If you disconnect the battery following  
this operation, lock the vehicle and wait  
19  
Instruments  
Oil gauge malfunction  
– In zone B, the temperature is too high.  
The associated warning lamp and the  
STOP warning lamp light up in red on the  
instrument panel, accompanied by the display of  
a message and an audible signal.  
You must stop the vehicle as soon as it is  
safe to do so.  
engine starting is prevented is displayed in the  
instrument panel.  
This is indicated by the display of "OIL_ _"  
or by the message "Oil level measurement  
invalid" (depending on the instrument panel),  
accompanied by the lighting of the Service  
warning lamp and an audible signal.  
Consult a PEUGEOT dealer or a qualified  
workshop.  
The engine starting prevention system  
required by regulations is activated  
automatically once the AdBlue® tank is empty.  
It is then no longer possible to start the  
engine until the minimum level of AdBlue® has  
been topped up.  
Wait a few minutes before switching off the  
engine.  
In the event of a malfunction of the  
electric gauge, the oil level is no longer  
monitored.  
If the system is faulty, you must check the  
engine oil level using the manual dipstick  
located in the engine compartment.  
For more information on Checking levels,  
refer to the corresponding section.  
After switching off the ignition, carefully  
open the bonnet and check the coolant  
level.  
Manual display of driving range  
(With matrix instrument panel and digital  
instrument panel)  
While the driving range is greater than  
1,500 miles (2,400 km), it is not displayed  
automatically.  
You can view the range information by  
pressing the "Check" button in  
the Driving/Vehicle touch screen menu.  
For more information on Checking  
levels, refer to the corresponding  
section.  
AdBlue® range indicators  
(BlueHDi)  
The Diesel BlueHDi engines are equipped with  
a system that associates the SCR (Selective  
Catalytic Reduction) emissions control system  
and the Diesel particle filter (DPF) for the  
treatment of exhaust gases. They cannot  
function without AdBlue® fluid.  
When the level of AdBlue® falls below the  
reserve level (between 1,500 and 0 miles (2,400  
and 0 km)), a warning lamp lights up when  
the ignition is switched on and an estimate  
of the distance that can be travelled before  
Coolant temperature  
indicator  
Actions required related to a lack of  
AdBlue®  
The following warning lamps light up when the  
quantity of AdBlue® is below the reserve level:  
driving range of 1,500 miles (2,400 km).  
Together with the warning lamps, messages  
regularly remind you of the need to top up to  
avoid engine starting being prevented. Refer to  
the Warning and indicator lamps section for  
details of the messages displayed.  
With the engine running:  
– In zone A, the temperature is correct.  
20  
Instruments  
Malfunction confirmed during the  
permitted driving phase (between 685  
miles and 0 miles (1,100 km and 0 km))  
For more information on AdBlue®  
(BlueHDi) and in particular on topping  
up, refer to the corresponding section.  
Warning/  
indicator  
lamps on  
Action  
Remaining  
range  
1
If the fault indication is still displayed  
permanently after 31 miles (50 km) of driving, the  
fault in the SCR system is confirmed.  
The AdBlue warning lamp flashes and  
a message is displayed ("Emissions  
control fault: starting prevented in X miles  
(kms)" or "NO START IN X miles (kms)"),  
indicating the driving range in miles or  
kilometres.  
While driving, the message is displayed every 30  
seconds. The alert is repeated when switching  
on the ignition.  
You can continue driving for up to 685 miles  
(1,100 km) before the engine starting  
prevention system is triggered.  
To be able  
0 miles (km)  
to restart the  
engine, add at  
least 5 litres of  
AdBlue® to the  
tank.  
Warning/  
indicator  
lamps on  
Action  
Remaining  
range  
Top up.  
Between  
1,500 miles  
and 500  
Malfunction of the SCR emissions  
control system  
miles (2,400  
km and 800  
km)  
Malfunction detection  
Top up as  
soon as  
possible.  
Between  
500 miles  
and 62  
If a malfunction is detected,  
these warning lamps come  
on, accompanied by an  
audible signal and the  
display of an "Emissions  
control fault" or "NO START  
IN" message.  
miles (800  
km and  
100 km)  
Have it checked by a PEUGEOT dealer  
or a qualified workshop.  
A top-up is  
vital, there is  
a risk that the  
engine will  
be prevented  
from starting.  
Between 62  
miles and 0  
miles (100  
km and 0  
km)  
Starting prevented  
Every time the ignition is switched on, the  
message "Emissions control fault: Starting  
prevented" or "NO START IN" is displayed.  
The alert is triggered while driving when the  
fault is detected for the first time, and thereafter  
when switching on the ignition for subsequent  
journeys, for as long as the cause of the fault  
persists.  
To restart the engine  
Contact a PEUGEOT dealer or a  
qualified workshop.  
If the fault is temporary, the alert  
disappears during the next journey, after  
self-diagnostic checks of the SCR emissions  
control system.  
21  
Instruments  
The state of charge of the traction battery  
is critical.  
Fixed, together with the reserve warning lamp,  
accompanied by an audible signal.  
► You must put the vehicle on charge.  
Power indicator (Electric)  
Charge level indicator  
(Electric)  
The remaining range is no longer  
calculated. The drive train power  
gradually decreases.  
The heating and air conditioning are switched  
off (even if the needle or cursor indicating  
their consumption is not at the "ECO"  
position).  
CHARGE  
Traction battery charging during deceleration  
and braking.  
ECO  
Moderate energy consumption and optimised  
driving range.  
POWER  
Energy consumption by the drive train during  
acceleration.  
NEUTRAL  
On switching on the ignition, your vehicle’s  
electric drive train neither consumes nor  
generates energy: after sweeping over the  
indicator, the needle or the cursor returns to its  
"neutral" position.  
The traction battery's actual charge level and  
the remaining range are displayed continuously  
when the vehicle is started.  
Thermal comfort  
consumption indicator  
(Electric)  
(Depending on version)  
With the ignition off, opening the driver's  
door activates the indicator.  
Associated warning lamps  
Two successive alert levels indicate that the  
energy available has dropped to a low level:  
1st level: Reserve  
The state of charge of the traction battery  
is low.  
Fixed and indicator in the red zone,  
accompanied by an audible signal.  
► View the remaining range on the instrument  
panel.  
With the ignition off, opening the driver's  
door activates the indicator, which moves  
to the "neutral" position.  
The gauge shows the consumption of the  
traction battery's electrical energy by the thermal  
comfort devices in the passenger compartment.  
With a digital instrument panel, the gauge only  
appears in "Personal" mode.  
► Put the vehicle on charge as soon as  
possible.  
2nd level: Critical  
22  
Instruments  
The devices in question are the heating and air  
conditioning systems.  
This equipment can be used:  
– If the vehicle is not plugged in, when the  
READY lamp is lit.  
– If the vehicle is plugged in, when the ignition is  
switched on ("Lounge" mode).  
Selecting ECO mode limits the performance of  
some of this equipment. The needle or cursor on  
the thermal comfort consumption indicator then  
moves into the "ECO" zone.  
the road speed must be displayed in the local  
country’s official unit (km/h or mph).  
The unit is changed via the screen  
configuration menu, with the vehicle  
stationary.  
Manual test  
1
This function allows you to check certain  
indicators and display the alerts log.  
It can be accessed via the "Check" button  
in the Driving/Vehicle touch screen  
menu.  
The following information is displayed on the  
instrument panel:  
– Engine oil level.  
– Next service due.  
– Tyre pressures.  
Lighting dimmer  
This system allows the brightness of the  
instruments and controls to be adjusted manually  
to suit the ambient light level.  
– Driving range associated with the AdBlue® and  
the SCR system (BlueHDi Diesel).  
– Current alerts.  
To quickly heat or cool the passenger  
compartment, feel free to temporarily  
select the maximum heating or cooling  
setting.  
When the heating is on maximum, the gauge  
on the thermal comfort consumption indicator  
is in the MAX zone. When the air conditioning  
is on maximum, it stays in the ECO zone.  
Excessive use of thermal comfort equipment,  
particularly at low speed, can significantly  
decrease the vehicle's range.  
Remember to optimise equipment settings  
upon achieving the desired level of comfort,  
and adjust them if necessary whenever you  
start the vehicle.  
After an extended period without using the  
heating, you may notice a slight odour during  
the first few minutes of use.  
With PEUGEOT Connect  
Radio  
► Press this button to select the  
Settings menu.  
This information is also displayed  
automatically every time the ignition is  
switched on.  
► Select "Brightness".  
► Adjust the brightness by pressing the  
arrows or moving the slider.  
Total distance recorder  
The total distance recorder measures the total  
distance travelled by the vehicle since its initial  
registration.  
With the ignition on, the total distance is  
displayed at all times. It remains displayed for  
30 seconds after switching off the ignition. It is  
displayed when the driver's door is opened, and  
when the vehicle is locked or unlocked.  
The settings are applied immediately.  
► Press outside the settings window to exit.  
You can also switch off the screen:  
► Press this button to select the  
Settings menu.  
► Select "Dark".  
The screen goes off completely.  
► Press the screen again (anywhere on its  
surface) to turn it on.  
When travelling abroad, you may have to  
change the distance units (km or miles):  
23  
Instruments  
Pressing the end of the wiper control stalk  
displays the trip computer data.  
With digital instrument panel  
Trip computer data is permanently displayed  
when the "Personal" display mode is selected.  
In all other display modes, pressing the end of  
the wiper control stalk will cause this data to  
appear temporarily in a specific window.  
Display of the various tabs  
With PEUGEOT Connect  
Nav  
With the lamps switched on:  
► Press this button to select the  
Settings menu.  
Trip reset  
► When the desired trip is displayed,  
press the button on the end of the wiper  
control stalk for more than 2 seconds.  
Trips "1" and "2" are independent and are used  
in the same way.  
► Select "OPTIONS".  
► Select "Screen configuration".  
Definitions  
► Select the "Brightness” tab.  
► Adjust the instrument panel and  
screen brightness by using the arrows or  
moving the slider.  
Range  
(miles or km)  
Distance that can still be travelled with the  
fuel remaining in the tank (based on the  
average fuel consumption over the last few miles  
(kilometres) travelled).  
This value may vary following a change in driving  
style or terrain, leading to a significant change in  
current fuel consumption.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the range  
is recalculated and is displayed if it exceeds 62  
miles (100 km).  
► Press this button to save and exit.  
You can also switch off the screen:  
► Press this button to select the  
Settings menu.  
► Select "Turn off screen".  
► Pressing the button located on the end of the  
wiper control stalk displays the following tabs in  
turn:  
The screen goes off completely.  
► Press the screen again (anywhere on its  
surface) to turn it on.  
– Current information:  
• Driving range (Petrol or Diesel).  
• Current fuel consumption.  
• Stop & Start time counter (Petrol or Diesel).  
– Trips "1" then "2":  
• Average speed.  
• Average fuel consumption.  
• Distance travelled.  
Dashes appearing permanently in place of  
numbers while driving indicates a malfunction.  
Consult a PEUGEOT dealer or a qualified  
workshop.  
Trip computer  
Displays information related to the current trip  
(range, fuel consumption, average speed, etc.).  
Current consumption  
(mpg or l/100 km or km/l)  
(miles/kWh or kWh/100 km or km/kWh) (Electric)  
Data displayed on the  
instrument panel  
With instrument panels with dials  
24  
Instruments  
– Use a soft, clean cloth to clean the touch  
/
Calculated during the last few  
seconds.  
Touch screen  
1
screen.  
This system gives access to the following  
elements:  
This function is only displayed at speeds above  
19 mph (30 km/h) (Petrol or Diesel).  
Main controls  
With 7-inch touch screen  
– Permanent display of the time and outside  
temperature (a blue warning lamp appears if  
there is a risk of ice).  
Average consumption  
(mpg or l/100 km or km/l)  
– Heating/air conditioning system controls.  
– Vehicle functions and equipment setting  
menus.  
(miles/kWh or kWh/100 km or km/kWh) (Electric)  
/
Calculated since the last trip  
computer reset.  
– Audio system and telephone controls and  
display of related information.  
– Display of visual manoeuvring aid functions  
(visual parking sensor information, Park Assist,  
etc.).  
Average speed  
(mph or km/h)  
Calculated since the last trip computer  
reset.  
– Internet services and display of related  
information.  
Distance travelled  
– Navigation system controls and  
display of related information (depending on  
version).  
(miles or km)  
Use the buttons arranged around the touch  
screen to access the menus, then press the  
virtual buttons on the touch screen.  
Calculated since the last trip computer  
reset.  
For safety reasons, always stop the  
vehicle before performing operations  
that require sustained attention.  
Some functions are not accessible while  
driving.  
Stop & Start time counter  
With 10-inch touch screen  
(minutes/seconds or hours/minutes)  
If your vehicle is fitted with the Stop & Start  
function, a time counter calculates the time spent  
in STOP mode during a journey.  
Recommendations  
This screen is of the capacitive type.  
– Do not use pointed objects on the touch  
screen.  
The time counter is reset each time the ignition is  
switched on.  
– Do not touch the touch screen with wet hands.  
25  
Instruments  
Use the buttons arranged below the touch  
screen to access the menus, then press the  
virtual buttons on the touch screen.  
Radio/Media  
Upper banner of the 7" touch screen  
– Time and outside temperature (a blue warning  
lamp appears if there is a risk of ice).  
– Reminder of the air conditioning information,  
and direct access to the corresponding menu.  
– Reminder of the information in the  
Radio Media and Telephone menus.  
– Notifications.  
Climate  
Settings for temperature, air flow, etc.  
For more information on Manual air  
conditioning or Automatic air conditioning,  
refer to the corresponding section.  
Navigation (Depending on equipment)  
Principles  
Some menus may display across two pages:  
press the "OPTIONS" button to access the  
second page.  
– Access to the Settings for the touch screen  
and the digital instrument panel (date/time,  
languages, units, etc.).  
If no action is performed on the second  
page, the first page is displayed  
automatically.  
Driving or Vehicle (Depending on  
equipment)  
Activation, deactivation and settings for certain  
functions.  
The functions are organised in 2 tabs: "Driving  
functions" and "Vehicle settings".  
Telephone  
Side banners of the 10" touch screen  
To deactivate/activate a function, select "OFF"  
or "ON".  
– Outside temperature (a blue warning lamp  
appears if there is a risk of ice).  
– Access to the Settings for the touch screen  
and the digital instrument panel (date/time,  
languages, units, etc.).  
Configure a function.  
Access additional information on the  
function.  
Confirm.  
Applications  
Access to certain configurable equipment.  
Energy  
– Notifications.  
– Reminder of the air conditioning information,  
and direct access to the corresponding menu.  
– Time.  
Access the specific Electric functions  
(energy flow, consumption statistics, deferred  
charge) organised in the corresponding 3 tabs.  
or  
Return to the previous page or confirm.  
Energy menu  
This menu is only available with PEUGEOT  
Connect Nav.  
Depending on version, this is accessible either:  
– directly, by pressing the button near the  
touch screen (with 10" touch screen).  
– via the Applications menu.  
Menus  
Settings  
Press the touch screen with three fingers  
to show all of the menu buttons.  
Main settings for the audio system, touch  
screen and digital instrument panel.  
Volume adjustment/mute  
For more information about the menus,  
refer to the sections describing the audio  
and telematics systems.  
Information banner(s)  
Certain information is displayed permanently in  
the touch screen banner(s).  
26  
Instruments  
Flow  
– Green bar chart: energy recovered during  
deceleration and braking, used to recharge the  
battery.  
The average result for the current trip is stated in  
kWh/100 km.  
– Temperature pre-conditioning management.  
– Consultation of statistics (where available).  
– Consultation of the state of charge and range  
of the vehicle.  
1
The page displays a real-time representation of  
the electric drive train’s operation.  
Installation procedure  
► You can change the displayed time scale by  
pressing the - or + buttons.  
► Download the MYPEUGEOT APP app from  
the appropriate online store for your smartphone.  
► Create an account.  
A current trip is any trip of more than 20  
minutes without switching off the ignition.  
► Enter the vehicle’s VIN (code beginning with  
"VF" on the vehicle registration document).  
For more information on Identification  
markings, refer to the corresponding section.  
Charging  
This page allows you to programme deferred  
charging.  
1. Active driving mode  
2. Electric motor  
Network coverage  
3. Estimated traction battery charge level  
4. Energy flows  
In order to be able to use the various  
remotely operable features, ensure that your  
vehicle is located in an area covered by the  
mobile network.  
For more information on Charging the traction  
battery (Electric), refer to the corresponding  
section.  
The energy flows have a specific colour for each  
type of driving:  
A. Blue: energy consumption  
B. Green: energy recovery  
A lack of network coverage may prevent  
communication with the vehicle (for example,  
if it is in an underground car park). In such  
cases, the application will display a message  
indicating that the connection with the vehicle  
could not be established.  
Additional remotely  
operable functions  
(Electric)  
Statistics  
This page shows electrical energy consumption  
statistics.  
(Depending on country of sale)  
The following functions are  
available from the MYPEUGEOT  
APP application, which is  
accessible from a smartphone:  
– Blue bar chart: directly consumed energy  
supplied by the traction battery.  
– Battery charge management (deferred  
charging).  
27  

Related Topics

Instrument panels
Warning and indicator lamps
Indicators
Manual test
Total distance recorder
Lighting dimmer
Trip computer
Touch screen
Additional remotely operable functions (Electric)