Instruments
Pressing the end of the wiper control stalk
displays the trip computer data.
With digital instrument panel
Trip computer data is permanently displayed
when the "Personal" display mode is selected.
In all other display modes, pressing the end of
the wiper control stalk will cause this data to
appear temporarily in a specific window.
Display of the various tabs
With PEUGEOT Connect
Nav
With the lamps switched on:
► Press this button to select the
Settings menu.
Trip reset
► When the desired trip is displayed,
press the button on the end of the wiper
control stalk for more than 2 seconds.
Trips "1" and "2" are independent and are used
in the same way.
► Select "OPTIONS".
► Select "Screen configuration".
Definitions
► Select the "Brightness” tab.
► Adjust the instrument panel and
screen brightness by using the arrows or
moving the slider.
Range
(miles or km)
Distance that can still be travelled with the
fuel remaining in the tank (based on the
average fuel consumption over the last few miles
(kilometres) travelled).
This value may vary following a change in driving
style or terrain, leading to a significant change in
current fuel consumption.
When the range falls below 19 miles (30 km),
dashes are displayed.
After filling with at least 5 litres of fuel, the range
is recalculated and is displayed if it exceeds 62
miles (100 km).
► Press this button to save and exit.
You can also switch off the screen:
► Press this button to select the
Settings menu.
► Select "Turn off screen".
► Pressing the button located on the end of the
wiper control stalk displays the following tabs in
turn:
The screen goes off completely.
► Press the screen again (anywhere on its
surface) to turn it on.
– Current information:
• Driving range (Petrol or Diesel).
• Current fuel consumption.
• Stop & Start time counter (Petrol or Diesel).
– Trips "1" then "2":
• Average speed.
• Average fuel consumption.
• Distance travelled.
Dashes appearing permanently in place of
numbers while driving indicates a malfunction.
Consult a PEUGEOT dealer or a qualified
workshop.
Trip computer
Displays information related to the current trip
(range, fuel consumption, average speed, etc.).
Current consumption
(mpg or l/100 km or km/l)
(miles/kWh or kWh/100 km or km/kWh) (Electric)
Data displayed on the
instrument panel
With instrument panels with dials
24
English