Instruments
The alert is given at whichever of these two
terms is reached first.
The servicing information is displayed in the
instrument panel. Depending on the version of
the vehicle:
– The distance recorder display line indicates
the distance remaining before the next service
is due, or the distance travelled since it was due
preceded by the "-" sign.
– An alert message indicates the distance
remaining, as well as the period before the next
service is due or how long it is overdue.
Service spanner flashing
Flashing then fixed, when the
ignition is switched on.
(With BlueHDi Diesel engines, associated with
the Service warning lamp.)
at least 5 minutes for the reset to be
registered.
1
Reminder of the servicing information
You can view the servicing information by
pressing the "Check" button in the
Driving/Vehicle touch screen menu.
The servicing interval has been exceeded.
Have your vehicle serviced as soon as possible.
Resetting the service indicator
The service indicator must be reset after each
service.
If you have serviced your vehicle yourself:
► Switch the ignition off.
Engine oil level indicator
(Depending on version)
On versions fitted with an electric gauge, the
engine oil level status is displayed on the
instrument panel for a few seconds when
the ignition is switched on, after the servicing
information.
The value indicated is calculated
according to the distance covered and
the time elapsed since the last service.
The alert may also be triggered close to a
due date.
The level read will only be correct if the
vehicle is on level ground and the engine
has been off for more than 30 minutes.
Service spanner
On temporarily when the ignition is
switched on.
Low oil level
Between 620 and 1,860 miles (1,000 and 3,000
km) remain before the next service is due.
Fixed, when the ignition is switched on.
The next service is due in less than 620
miles (1,000 km).
This is indicated by the display of "OIL" or by
the message "Oil level incorrect" (depending
on the instrument panel), accompanied by the
lighting of the Service warning lamp and an
audible signal.
If a low oil level is confirmed by a check using
the dipstick, the level must be topped up to avoid
damage to the engine.
► Press and hold the button located on the end
of the lighting control stalk.
► Without pressing the brake pedal, press the
START/STOP button once; a temporary display
window appears and a countdown begins.
► When the display indicates =0, release the
lighting control stalk button; the spanner symbol
disappears.
Have your vehicle serviced very soon.
For more information on Checking levels, refer
to the corresponding section.
If you disconnect the battery following
this operation, lock the vehicle and wait
19