Advertisement

Advertisement

DRIVING -> PORSCHE TIPTRONIC SYSTEM' AUTOMATIC GEARBOX for Your Peugeot 206 4 Door 1998-2013

74 - DRIVING  
'PORSCHE TIPTRONIC  
SYSTEM' AUTOMATIC  
GEARBOX  
Gear selection gate  
Moving Off  
F Move the lever in the gate to  
select a position.  
With the engine running, to move off  
from position P:  
F it is essential to press the  
brake pedal to exit position P,  
F select position R, D or M, then  
gradually release the pressure  
on the brake pedal; the vehicle  
moves off immediately.  
You can also move off from position N:  
F release the handbrake, with your  
foot on the brake,  
F select position R, D or M, then  
gradually release the pressure  
on the brake pedal; the vehicle  
moves off immediately.  
The indicator light corresponding  
to the position selected appears  
on the instrument panel screen.  
The four speed automatic gearbox  
offers a choice between the comfort  
of integral automatic operation,  
enhanced by a sport and a snow pro-  
gramme, or manual gear changing.  
Park: to immobilise the vehicle and  
to start the engine, with the hand-  
brake on or off.  
Reverse: to reverse (select this  
position with the vehicle stationary,  
engine at idle).  
Neutral: to start the engine and to  
park, with the handbrake on.  
If position N is inadvertently engaged  
while driving, allow the engine to re-  
turn to idle before engaging position D  
to accelerate.  
Drive: for driving in automatic mode.  
Manual: for selection of gears.  
S: sport programme.  
WARNING  
When the engine is at idle, brakes not  
applied, if position R, D or M is se-  
lected, the vehicle moves even with-  
out the accelerator being pressed.  
For this reason, do not leave children  
unsupervised inside the vehicle,  
with the engine running.  
T: snow programme.  
When maintenance operations need  
to be carried out with the engine run-  
ning, apply the handbrake and select  
position P.  
Starting the engine  
F with the handbrake on, select  
position P or N in the gate,  
F turn the ignition key to the Start  
position.  
DRIVING 75  
-
If you take your foot off the accel-  
erator suddenly, the gearbox will not  
change to a higher gear for reasons  
of safety.  
Automatic operation  
Manual operation  
Automatic changing of the four  
gears:  
F select position D in the gate.  
The gearbox always selects the most  
suitable gear according to the follow-  
ing parameters:  
Manual changing of the four gears:  
F select position M in the gate,  
F push the lever to the + sign to  
change to a higher gear,  
F pull the lever to the - sign to  
change to a lower gear.  
You can change from position D  
(driving in automatic mode) to posi-  
tion M (driving in manual mode) at  
any time.  
Sport and snow programmes  
In addition to the auto-adaptive  
programme, there are two special  
programmes.  
The programme is displayed on the  
instrument panel screen.  
-
-
the road proile,  
the vehicle load.  
The gearbox is then operating in  
auto-adaptive mode, without any ac-  
tion on your part.  
Sport programme  
F Press button S once the engine  
has been started.  
The gearbox automatically favours  
sporty driving and more dynamic  
acceleration.  
WARNING  
Never select position N when the  
vehicle is moving.  
Never select positions P or R unless  
the vehicle is stationary.  
Never change between positions to  
optimise braking on a slippery sur-  
face.  
Notes  
It is only possible to change from one  
gear to another if the vehicle speed  
and engine speed permit. If they do  
not, the vehicle will operate tempo-  
rarily in automatic mode.  
Snow programme  
This programme improves starting  
and drive when traction is poor.  
When the vehicle is stationary or  
moving very slowly, the gearbox  
automatically selects gear M1.  
F Press button T once the engine  
has been started.  
Notes  
Programmes S (sport) and T (snow)  
do not operate in manual mode.  
The gearbox adapts to driving on  
slippery roads.  
For immediate maximum accelera-  
tion without touching the gear lever,  
press the accelerator pedal down as  
far as it will go (kickdown). The gear-  
box will automatically change down  
or maintain the gear selected until  
maximum engine speed is reached.  
When the brake is applied, the gear-  
box will automatically change down  
in order to provide eficient engine  
braking.  
Note: you can return to the auto-  
adaptive programme at any time.  
F Press button S or T again to  
switch off the programme you  
are in.