78 - DRIVING
Exceeding the programmed
speed
Pressing the accelerator in order to
exceed the programmed speed will
have no effect unless you press the
pedal irmly beyond the point of re-
sistance.
The limiter is deactivated temporarily
and the programmed speed, which is
still displayed, lashes (e.g. at 70 mph
(110 km/h)):
Switching the function off
F Place dial 1 in position 0
or switch off the ignition to
switch the system off. The last
programmed speed remains in
the memory.
Operating fault
In the event of a limiter malfunction,
the programmed speed is cleared
and the indication below appears:
Note: the speed also lashes when
the limiter cannot prevent the vehicle
from exceeding the programmed
speed (on a steep descent, in the
event of sharp acceleration).
To reactivate the limiter, release the
accelerator to slow down to a speed
below the programmed speed.
Contact a PEUGEOT dealer to have
the system checked.
In the event of a steep descent
or sharp acceleration, the speed
limiter will not be able to prevent
the vehicle from exceeding the
programmed speed.
In any event, the speed limiter can-
not replace the need to observe
speed limits, nor can it replace the
need for vigilance and responsibility
on the part of the driver.
To prevent the mat from becoming
caught under the pedals:
-
ensure that the mat and its
ixings are positioned correctly
.
-
never it one mat on top of
another.
You are advised to keep your feet
near the pedals.
English 