Driving
(40 km/h) with 2nd gear or higher engaged in
Malfunction
Steering mounted controls
manual mode, or position D selected.
Selection
The registered speed is erased, then replaced
by three dashes.
Have it checked by a PEUGEOT dealer or
a qualified workshop.
F Place the thumbwheel at the "CRUISE"
position: cruise control mode is selected,
but is not switched on (PAUSE).
Under no circumstances can the speed
limiter replace the need to observe speed
limits, nor the need for vigilance on the
part of the driver.
Always pay attention to the profile of the
road, be careful when accelerating sharply
and stay in complete control of your
vehicle.
Registering a cruise speed
setting
1. Cruise control mode selection/off.
2. Increase the programmed value.
3. Decrease the programmed value.
4. Stop/resume cruise control.
6
To avoid any jamming under the pedals:
-
ensure that the mat is positioned and
secured to the floor correctly,
never fit one mat on top of another.
This driving assistance system, for use
when the traffic is flowing, allows a speed
programmed by the driver to be maintained,
except on a steep gradient.
-
Bring the vehicle up to the desired speed by
pressing the accelerator.
-
-
Press the SET – or
SET + button.
With a manual gearbox
Cruise control "CRUISE"
System which automatically maintains the
speed of the vehicle at the value programmed
by the driver, without any action on the
accelerator pedal.
In order for it to be programmed or activated,
the speed of the vehicle must be above 25 mph
(40 km/h) with 4th gear or higher engaged.
With an automatic gearbox
In order for it to be programmed or activated,
the speed of the vehicle must be above 25 mph
The speed setting is registered/activated and
the vehicle will maintain this speed.
93
English