Driving
A short press decreases the setting by 1 mph
(km/h).
Pressing and holding decreases the setting in
steps of 5 mph (km/h).
the system for each of the two systems.
By default, some speed settings are already
memorised.
When changing the registered speed
setting by means of a maintained press,
pay attention as the speed may increase
or decrease rapidly.
With touch screen
Do not use the cruise control on slippery
roads or in heavy traffic.
On a steep descent, the cruise control will
not be able to prevent the vehicle from
exceeding the registered speed.
Switching the function off
This memorisation can be
configured from the Driving/Vehicle
menu.
F Place the thumbwheel at the "0" position:
cruise control mode is deselected. The
display returns to the total mileage recorder.
The cruise control system cannot, in
any circumstances, replace the need
to observe speed limits or the need for
vigilance on the part of the driver.
To avoid any risk of jamming of the pedals:
After switching off the ignition, all registered
speed settings are lost.
F Select the "Driving functions" tab.
F Select the "Adjusting speeds" function.
F Press "ON" to activate the function.
F Tick the speed settings 1 to 5 that you want
to use.
F Select the speed setting value that you want
to change.
F Enter the new value using the numerical
keypad and press "OK" to confirm.
Malfunction
-
ensure that the mat is positioned and
secured to the floor correctly,
-
never fit one mat on top of another.
The registered speed is erased, then replaced
by three dashes.
Have it checked by a PEUGEOT dealer or
a qualified workshop.
6
Memorising speeds
This function allows speed settings to be stored
that will then be offered for configuration of two
systems: speed limiter (limit speed) or cruise
control (cruise speed).
As a safety measure, the driver must carry
out these operations when stationary.
You can memorise up to five speed settings in
95
English