Lighting and visibility
To maintain the effectiveness of the wiper
blades, it is advisable to:
Reverse gear
Changing a wiper blade
This position permits release of the windscreen
When reverse gear is engaged, the rear wiper
will come into operation if the windscreen wiper
is operating.
-
-
-
handle them with care,
wiper blades.
clean them regularly using soapy water,
avoid using them to retain cardboard on the
windscreen,
It is used for cleaning or replacing the wiper
blades. It can also be useful, in winter, to
release the wiper blades from the windscreen.
The activation or deactivation of
operation of the rear wiper when
engaging reverse gear can be set in
the Driving/Vehicle menu.
-
replace them at the first signs of wear.
Rear wiper
4
To move the wiper blades to the vertical position:
F Operate the wiper control stalk within one
minute after switching off the ignition to
position the wiper blades vertically on the
windscreen.
Off.
Intermittent wipe.
To return them to the park position:
F Switch on the ignition and operate the wiper
control stalk.
Wash-wipe (set duration).
Removing a wiper blade
F Lift the corresponding wiper arm.
F Unclip and remove the wiper blade.
If a significant accumulation of snow or ice
is present, or when using a bicycle carrier
on the boot, deactivate the automatic rear
wiper via the vehicle configuration menu
on the touch screen.
Fitting a new wiper blade
F Put the corresponding new wiper blade in
place and clip it.
F Fold down the wiper arm carefully.
57
English