Lighting and visibility -> Lighting control stalk for Your Peugeot 208 4 Door First Generation (2012-2019)

Lighting and visibility  
Lighting off (ignition off)/Front daytime  
running lamps (engine running).  
Rear foglamp only  
Lighting control stalk  
Sidelamps only.  
In some weather conditions (e.g. low  
temperature or humidity), the presence  
of misting on the internal surface of the  
glass of the headlamps and rear lamps is  
normal; it disappears after the lamps have  
been on for a few minutes.  
Dipped or main beam headlamps.  
F To switch it on, turn the ring forwards.  
When the lighting is switched off automatically  
(version with AUTO lighting), the foglamp and  
the dipped beam headlamps will remain on.  
F To switch it off, turn the ring rearwards.  
Automatic illumination of headlamps.  
Travelling abroad  
Headlamp dipping  
If planning to use your vehicle in a country  
that drives on the other side of the road,  
the dipped beam headlamps must be  
adjusted to avoid dazzling oncoming  
drivers. Contact a PEUGEOT dealer or  
a qualified workshop.  
4
Front foglamps and rear foglamp  
Pull the stalk to switch between dipped and  
main beam headlamps.  
In the lighting off and sidelamps modes, the  
driver can switch on the main beam headlamps  
temporarily ("headlamp flash") by maintaining  
a pull on the stalk.  
Selection of main lighting  
mode  
Rotate and release the ring:  
F once forwards to switch on the front  
foglamps,  
F forwards a second time to switch on the rear  
foglamp,  
F once rearwards to switch off the rear  
foglamp,  
F rearwards a second time to switch off the  
front foglamps.  
Display  
Illumination of the corresponding indicator  
lamp in the instrument panel confirms that the  
lighting selected is on.  
Foglamps  
The foglamps operate with dipped or main  
beam headlamps on.  
Turn the ring to align the desired symbol with  
the marking.  
51