Lighting and visibility
Parking lamps
Daytime running lamps/
Sidelamps
Headlamp beam height
adjustment
To avoid causing a nuisance to other road
users, the height of the headlamp beams
should be adjusted according to the load in the
vehicle.
Vehicle side marking by illumination of the
sidelamps on the traffic side only.
The front and rear lamps light up automatically
when the engine starts.
They provide the following functions:
F Within one minute after switching off the
ignition, operate the lighting control stalk up
or down, depending on the traffic side (for
example, when parked on the left, move the
lighting control stalk upwards; the right-hand
sidelamps come on).
This is confirmed by an audible signal and
illumination of the corresponding direction
indicator lamp in the instrument panel.
To switch off the parking lamps, return the
lighting control stalk to the middle position or
switch on the ignition.
0. 1 or 2 people in the front seats.
-. Intermediate setting.
-
Daytime running lamps (lighting control
stalk at position "0" or "AUTO" with
adequate light level).
1. 5 people.
-. 5 people + maximum authorised load.
2. Driver + maximum authorised load.
-
Sidelamps (lighting control stalk at "AUTO"
position with low light levels or "Sidelamps
only" or "Dipped/main beam headlamps").
The LEDs are brighter when operating as
daytime running lamps.
The initial setting is position "0".
54
English