Get 306 in detail -> Audio Systems (RB1, RD1, Travel Pilot, CD Changer) Guide for Peugeot 306 4 Door First Generation (1993-2002)

56

YOUR 306 IN DETAIL

AUDIO RB1

A

B

C D

E

F

G

H

M

K

L

J

I

1

1 - Upwards

2 - Downwards

3 - Forwards

: Raise volume

: Lower volume

4

: Automatic search of lower frequencies

(radio). Selection of previous track (CD)*

3

4 - Backwards

: Automatic search of higher frequencies (radio).

Selection of next track (CD)*

2

* Available as an accessory.

Downloaded from www.Manualslib.com manuals search engine

57

YOUR 306 IN DETAIL

Button

TA

Function

A

B

Traffic information priority on/off.

RDS

BND/AST

SRC

RDS on/off.

Pressed for over 2 seconds: regional following mode on/off.

C

D

Waveband selection FMI, FMII, FMIII, AM.

Pressed for over 2 seconds: autostore, automatic storing of stations.

Source selection; radio, cassette or CD*.

Pressed for over 2 seconds: CD* shuffle.

E

F

Pressed fully: cassette fast rewind.

Pressed fully:cassette fast fowards.

jj

kk

E + F

Pressed half-way: reverses the direction of play of the cassette.

Pressed fully: ejects the cassette.

jj

kk

▲

G

H

I

Increase the audio setting.

Decrease the audio setting.

AUDIO

MAN

Selects bass, treble, loudness, balance and fader.

J

Higher frequency automatic search.

Selection of next CD* track.

K

Lower frequency automatic search.

Selection of previous CD* track.

L

M

Manual/automatic operation of button J and K.

Audio system on/off. Volume adjustment.

1 to 6

Selects a stored station.

Pressed for over 2 seconds: stores a station.

Selects a CD* disk.

* Available as an accessory.

Downloaded from www.Manualslib.com manuals search engine

58

YOUR 306 IN DETAIL

GENERAL FUNCTIONS

On / off

With the ignition key in the ACCESSORIES or IGNITION position, press the "ON/VOL" button to switch the set

on or off.

ANTI-THEFT SYSTEM

The first time you use the set following disconnection of the set or the battery, you must enter the confidential code

which was given to you on handover of your vehicle.

Entering the code

Switch the set on.

The display shows "CODE" then the set changes over to code request mode and "- - - -" is displayed.

Enter your four-digit code number using buttons "1" to "6".

For example: if your code is 5345 press buttons "5", "3", "4" and "5" in turn.

When the fourth number has been entered correctly, the radio starts automatically.

Error in entering the code

If an error is made when entering one of the first three digits, do not continue the operation and switch off the radio

to prevent blocking it.

Each incorrect code entry will result in the set being blocked for a period of from 5 seconds to 30 minutes, after

the 7th incorrect entry.

To unblock the set, leave it switched on during the waiting period. When "- - - -" is displayed, you can enter the

code again.

If the set is switched off during the waiting period, this waiting period will restart when the set is switched on again.

After 14 incorrectly input codes, the radio will be permanently locked and the display will read “END”.

ADJUSTING THE SOUND

Adjusting the volume

Turn the "M" button to increase or decrease the volume of the set.

In the event of the radio overheating, the volume reduces. If an attempt is made to increase the volume the message

"TOO HOT’’ appears on the display.

Note

If you have a telephone fitted with a “mute” signal output connected to the set, the set will automatically change

to “mute” when the telephone is used.

Downloaded from www.Manualslib.com manuals search engine

59

YOUR 306 IN DETAIL

AUDIO SETTINGS

Press the “AUDIO“ button several times to select bass (BASS), treble (TREB), loudness (LOUD), fader (FAD) and

balance (BAL).

Exit from audio mode is automatic after a few seconds, without pressing any button or by pressing the “AUDIO”

button after adjusting the balance.

Note : bass and treble settings are speciflc to each source. It is possible to set them differently for radio,

cassette and CD.

Bass setting

When “BASS” is displayed, press the “G” or “H” buttons to vary the setting.

—“BASS —9” for a minimum bass setting,

—“BASS 0” for a normal position,

—“BASS +9” for a maximum bass setting.

Treble setting

When “TREB” is displayed, press the “G” or “H” buttons to vary the setting.

—“TREB —9” for a minimum treble setting,

—“TREB 0” for a normal position,

—“TREB +9” for a maximum treble setting.

Adjusting the loudness

This function automatically emphasises bass and treble tones when the volume is low.

Press the “G” or “H” buttons to switch this function on or off.

Setting the front/rear sound distribution (Fader)

When “FAD” is displayed, press the “G” or “H” buttons to vary the setting.

The “G” button increases the volume at the front.

The “H” button increases the volume at the rear.

Note : For vehicles fitted with speakers at the front only, it is possible to cancel or add this function. This ope-

ration is carried out as follows:

- ignition key in Accessories position,

- with the radio switched off,

- simultaneously pressing buttons “I” and “M”.

Downloaded from www.Manualslib.com manuals search engine

60

YOUR 306 IN DETAIL

Setting the right/left sound distribution (Balance)

When “BAL” is displayed, press the “G” or “H” buttons to vary the setting.

The “G” button increases the volume on the right-hand side.

The “H” button increases the volume on the left-hand side.

RADIO

Notes on radio reception

Your car radio receiver is subject to phenomena which do not affect domestic sets. Both MW/LW and FM recep-

tion are subject to various forms of interference which are not a reflection on the quality of your set, but are due

to the nature of the signals and the way in which they are transmitted.

On MW/LW, interference may be noticed when passing underneath high voltage power lines or bridges or in

tunnels.

On FM, interference may be the result of distance from the transmitter, reflection of the signal by obstacles (moun-

tains, hills, buildings etc), or of being in an area which is not covered by a transmitter.

Selecting the radio

Press the "SRC" button, until the radio is selected.

Selecting a waveband

By short presses on the "BND/AST" button, you can select the FMI, FMII, FMIII, and AM wavebands.

Automatic station search

Briefly press button "J" or "K" to search for the next station up or down the waveband. By continuing to press the

button in the direction selected, you will obtain continous scrolling of the frequency.

The scrolling stops at the first station found as soon as you release the button.

If the TA traffic programme is selected, only stations broadcasting this type of programme are selected.

Searching for a station occurs first in "LO" sensitivity (selection of the most powerful transmitters, while scanning

the waveband, then in "DX" sensitivity (selection of the most powerful transmitters).

Downloaded from www.Manualslib.com manuals search engine

60

YOUR 306 IN DETAIL

Setting the right/left sound distribution (Balance)

When “BAL” is displayed, press the “G” or “H” buttons to vary the setting.

The “G” button increases the volume on the right-hand side.

The “H” button increases the volume on the left-hand side.

RADIO

Notes on radio reception

Your car radio receiver is subject to phenomena which do not affect domestic sets. Both MW/LW and FM recep-

tion are subject to various forms of interference which are not a reflection on the quality of your set, but are due

to the nature of the signals and the way in which they are transmitted.

On MW/LW, interference may be noticed when passing underneath high voltage power lines or bridges or in

tunnels.

On FM, interference may be the result of distance from the transmitter, reflection of the signal by obstacles (moun-

tains, hills, buildings etc), or of being in an area which is not covered by a transmitter.

Selecting the radio

Press the "SRC" button, until the radio is selected.

Selecting a waveband

By short presses on the "BND/AST" button, you can select the FMI, FMII, FMIII, and AM wavebands.

Automatic station search

Briefly press button "J" or "K" to search for the next station up or down the waveband. By continuing to press the

button in the direction selected, you will obtain continous scrolling of the frequency.

The scrolling stops at the first station found as soon as you release the button.

If the TA traffic programme is selected, only stations broadcasting this type of programme are selected.

Searching for a station occurs first in "LO" sensitivity (selection of the most powerful transmitters, while scanning

the waveband, then in "DX" sensitivity (selection of the most powerful transmitters).

Downloaded from www.Manualslib.com manuals search engine

61

YOUR 306 IN DETAIL

Manual station search

Press the “MAN” button.

Briefly press button “J” or “K” respectively to increase or reduce the frequency displayed.

By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.

Scrolling stops as soon as you release the button.

Pressing the “MAN” button again returns you to automatic station search.

Manual storing of stations in the memory

Select the station required.

Press for more than two seconds one of the buttons “1” to “6”.

The sound stops then becomes audible again, confirming that the station has been stored in memory.

Automatic storing of FM stations in the memory (autostore)

Press the “BND/AST” button for more than two seconds, to automatically store the 6 stations with the strongest

signal in FM. These stations are stored in the FMIII waveband.

- If it is not possible to find 6 stations, the remaining memories are empty.

Recalling stations stored in the memory

For each waveband, briefly pressing the buttons “1” to “6” recalls the corresponding stored station.

RDS FUNCTION

Using the RDS (Radio Data System) function on FM

RDS allows you to continue to listen to the same station, whatever frequency it is using for the region you are going

through.

Switch the function on or off by briefly pressing the “RDS” button.

RDS station following

The display indicates the name of the station selected. The radio is continually searching for the station which has

the best reception and which is transmitting the same programme.

Downloaded from www.Manualslib.com manuals search engine

62

YOUR 306 IN DETAIL

Traffic information programmes

Press the "TA" button to switch the function on or off.

Any traffic information flash will be given priority, whatever source you are listening to (radio, cassette or CD).

If you wish to interrupt a message, press the "TA" button; this switches off the function.

Note : the volume of the traffic information announcements is independent of the volume of normal radio

listening. You can adjust it using the volume button. The setting will be stored and will be used when the

next messages are broadcast.

While traffic information is being broadcast, the display will alternately show “TRAFFIC” and the name of the

station.

When the station selected cannot broadcast traffic information, the display shows “NO TA”.

Regional following mode (REG)

When they are part of a network, certain stations broadcast regional programmes in the various areas they serve.

With regional following mode you can keep listening to the same programme.

To do this press the “RDS” button for more than two seconds to switch this function on or off.

Downloaded from www.Manualslib.com manuals search engine

63

YOUR 306 IN DETAIL

CASSETTE

Selecting cassette mode

When a cassette is inserted, the cassette player will start automaticaily.

If a cassette is already inserted, press the "SRC" button until the cassette is selected.

Ejecting the cassette

Fully press both buttons "E" and "F" to eject the cassette from the player.

Direction of play

The player will play sides 1 and 2 of the cassette alternately, by automatically reversing the direction of play at the

end of a side.

To manually reverse the direction of play, press both buttons "E" and "F" part way.

Fast forward/rewind

Fully press one of the buttons "E" or "F" to fast forward or fast rewind the cassette. At the end of the fast

forward rewind, the set plays the current side.

Note: - During fast forwards or rewind of a cassette, the audio system will automatically play the last radio

station.

- Never insert a damaged cassette.

Downloaded from www.Manualslib.com manuals search engine

64

YOUR 306 IN DETAIL

CD MULTI-CHANGER (Available as an accessory)

Selecting the CD changer

Press the "SRC" button until the CD changer is selected.

Selecting a disc

Press a button from “1” to “6” to select the corresponding disc.

Selecting a track

Press button “J” to select the next track.

Press button “K” to return to the start of the current track or to select the previous track.

Accelerated play

Press the “MAN” button.

Keep button “J” or “K” pressed for forwards or backwards accelerated play.

Accelerated play stops as soon as you release the button.

Buttons “J” and “K” resume the “track selection” function when the “MAN” button is pressed again.

Shuffle (RAND)

When the CD multi-changer is selected, keep the “SRC” button pressed for two seconds. The tracks will be played

in random sequence. Pressing the “SRC” button again for two seconds returns you to normal play.

Downloaded from www.Manualslib.com manuals search engine

65

YOUR 306 IN DETAIL

CD CHANGER (Available as an accessory)

C

B

A

To insert a disc into the changer:

– open sliding panel A,

– press button B to eject the cartridge C,

– open one of the six compartments of the cartridge by pulling tab D,

– insert the disc with the printed face upwards and close the compartment,

– insert the cartridge into the changer,

C

D

– close the sliding panel A.

Downloaded from www.Manualslib.com manuals search engine

66

YOUR 306 IN DETAIL

AUDIO RD1

A

B C

D

E

M

K

L J

H

I

G

F

1

1 - Upwards

2 - Downwards

3 - Forwards

: Raise volume

: Lower volume

4

: Automatic search of lower frequencies

(radio). Selection of previous track (CD)

3

4 - Backwards

: Automatic search of higher frequencies (radio).

Selection of next track (CD)

2

Downloaded from www.Manualslib.com manuals search engine

67

YOUR 306 IN DETAIL

Button

Function

A

B

i

Ejection of the CD.

RDS

RDS function on/off.

Press for more than 2 seconds: regional station following on/off.

C

TA

Traffic information priority on/off.

Press for more than 2 seconds: PTY function on/off.

D

E

F

Increase the audio setting.

▲

Decrease the audio setting.

▲

AUDIO

Selects bass, treble, loudness, balance and fader.

G

Automatic search of higher frequency.

Selection of next CD track.

H

Automatic search of lower frequency.

Selection of previous CD track.

I

MAN

Manual/automatic operation of buttons G and H.

J

Source selection, radio. Selection of wavebands FM1, FM2, FM3, AM.

Press for more than 2 seconds: automatic storing of stations (autostore).

K

L

Source selection, CD.

Press for more than 2 seconds: shuffle.

Source selection: CD changer.

Press for more than 2 seconds: shuffle.

M

ON/VOL

Radio on/off. Volume adjustment.

1 to 6

Selection of the stored station.

Press for more than 2 seconds: storing a station.

Selection of a CD disc.

Downloaded from www.Manualslib.com manuals search engine

68

YOUR 306 IN DETAIL

GENERAL FUNCTIONS

On / off

With the ignition key in the ACCESSORIES or IGNITION position, press the "M" button to switch the set on or off.

The set can operate for 30 minutes without switching the ignition on.

ANTI-THEFT SYSTEM

The first time you use the set following disconnection of the set or the battery, you must enter the confidential code

which was given to you on handover of your vehicle.

Entering the code

Switch the set on.

The display shows "CODE IN" then the set changes over to code request mode and "- - - -" is displayed.

Enter your four-digit code number using buttons "1" to "6".

For example: if your code is 5345 press buttons "5", "3", "4" and "5" in turn.

When the fourth number has been entered correctly, the radio starts automatically.

Error in entering the code

If an error is made when entering one of the first three digits, do not continue the operation and switch off the radio

to prevent blocking it.

Each incorrect code entry will result in the set being blocked for a period of from 5 seconds to 30 minutes, after

the 7th incorrect entry.

To unblock the set, leave it switched on during the waiting period. When "- - - -" is displayed, you can enter the

code again.

If the set is switched off during the waiting period, this waiting period will restart when the set is switched on again.

After 14 incorrectly input codes, the radio will be permanently locked and will display “END”.

ADJUSTING THE SOUND

Adjusting the volume

Turn the "ON/VOL" button M to increase or decrease the volume of the set.

In the event of the radio overheating, the volume level decreases.

Note

If you have a telephone fitted with a “mute” signal output connected to the set, the set will automatically change

to “mute” when the telephone is used.

Downloaded from www.Manualslib.com manuals search engine

69

YOUR 306 IN DETAIL

AUDIO SETTINGS

Press the “AUDIO“ button several times to select bass (BASS), treble (TREB), loudness (LOUD), fader (FAD)

and balance (BAL).

Exit from audio mode is automatic after a few seconds, without pressing any button or by pressing the “AUDIO”

button after adjusting the balance.

Note: the bass and treble settings are specific to each source. It is possible to set the radio, CD, or CD multi-changer

differently.

Bass setting

When “BASS” is displayed, press the “D” or “E” buttons to vary the setting.

—“BASS —9” for a minimum bass setting,

—“BASS 0” for a normal position,

—“BASS +9” for a maximum bass setting.

Treble setting

When “TREB” is displayed, press the “D” or “E” buttons to vary the setting.

—“TREB —9” for a minimum treble setting,

—“TREB 0” for a normal position,

—“TREB +9” for a maximum treble setting.

Adjusting the loudness

This function automatically emphasises bass and treble tones when the volume is low.

Press the “D” or “E” buttons to switch this function on or off.

Setting the front/rear sound distribution (Fader)

When “FAD” is displayed, press the “D” or “E” buttons to vary the setting.

The “D” button increases the volume at the front.

The “E” button increases the volume at the rear.

This function may be switched off by simultaneously pressing buttons “M” and “F”.

Setting the right/left sound distribution (Balance)

When “BAL” is displayed, press the “D” or “E” buttons to vary the setting.

The “D” button increases the volume on the right-hand side.

The “E” button increases the volume on the left-hand side.

Downloaded from www.Manualslib.com manuals search engine

70

YOUR 306 IN DETAIL

RADIO

Notes on radio reception

Your car radio receiver is subject to phenomena which do not affect domestic sets. Both MW/LW and FM recep-

tion are subject to various forms of interference which are not a reflection on the quality of your set, but are due

to the nature of the signals and the way in which they are transmitted.

On MW/LW, interference may be noticed when passing underneath high voltage power lines or bridges or in

tunnels.

On FM, interference may be the result of distance from the transmitter, reflection of the signal by obstacles (moun-

tains, hills, buildings etc), or of being in an area which is not covered by a transmitter.

Selecting the radio

Press the "J" button.

Selecting a waveband

By short presses on the “J” button, you can select the FM1, FM2, FM3 and AM wavebands.

Automatic station search

Briefly press button “G” or “H” to search for the station immediately above or below. By continuing to press the button

in the direction selected, you will obtain continuous scrolling of the frequency.

The scrolling stops on the first station found immediately after you release the button.

If TA, traffic information programme, is selected, only stations broadcasting this type of programme are selected.

Searching for a station occurs first in “LO” sensitivity (selection of the most powerful transmitters) during

scanning of the waveband, then in “DX” sensitivity (selection of the weakest and most distant transmitters).

To scan the waveband in “DX” sensitivity, press twice on button “G” or “H”.

Manual station search

Press the “MAN” button.

Briefly press button “G” or “H” respectively to increase or reduce the frequency displayed.

By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.

Scrolling stops as soon as you release the button.

Pressing the “MAN” button again returns you to automatic station search.

Downloaded from www.Manualslib.com manuals search engine

71

YOUR 306 IN DETAIL

Manual storing of stations in the memory

Select the station required.

Press for more than two seconds one of the buttons “1” to “6”.

The sound stops then becomes audible again, confirming that the station has been stored in memory.

Automatic storing of FM stations in the memory (autostore)

Press the “J” button for more than two seconds, to automatically store the 6 stations with the strongest signal in

FM. These stations are stored in the FM3 waveband.

- If it is not possible to find 6 stations, the remaining memories are empty.

Recalling stations stored in the memory

For each waveband, briefly pressing the buttons “1” to “6” recalls the corresponding stored station.

RDS FUNCTION

Using the RDS (Radio Data System) function on FM

RDS allows you to continue to listen to the same station, whatever frequency it is using for the region you are going

through.

Switch the function on or off by briefly pressing the “RDS” button.

RDS station following

The display indicates the name of the station selected. The radio is continually searching for the station which has

the best reception and which is transmitting the same programme.

Downloaded from www.Manualslib.com manuals search engine

72

YOUR 306 IN DETAIL

Traffic information programme

Press the “TA” button to switch the function on or off.

Any traffic information flash will be broadcast as a priority, whether you are using the radio, CD, CD multi-

changer.

If you wish to interrupt a message, press the “TA” button; this switches off the function.

Note : the volume of the traffic information announcements is independent of the volume of normal radio

listening. You can adjust it using the volume button. The setting will be stored and will be used when the

next messages are broadcast.

While traffic information is being broadcast, the display will alternately show “TRAFFIC” and the name of the

station.

When the station selected cannot broadcast traffic information, the display shows “NO TA”.

Regional following mode (REG)

When they are part of a network, certain stations broadcast regional programmes in the various areas they serve.

With regional following mode you can keep listening to the same programme.

To do this press the “RDS” button for more than two seconds to switch this function on or off.

PTY function

This allows you to listen to stations broadcasting a specific type of programme (news, culture, sport, rock etc.).

With FM selected, press the “TA” button for two seconds to switch this function on or off.

To find a PTY programme:

- switch on the PTY function,

- briefly press button “G” or “H” to scroll down the list of the various types of programmes offered,

- when the programme of your choice is displayed, keep button “G” or “H” pressed for more than two seconds

to carry out an automatic search (after an automatic search the PTY function is switched off).

In PTY mode the different types of programmes can be stored in memory. To do this, press down the preselec-

tion buttons “1” to “6” for more than two seconds. Recalling the type of programme stored in the memory is by

a brief press on the corresponding button.

Downloaded from www.Manualslib.com manuals search engine

73

YOUR 306 IN DETAIL

EON system

This connects stations which are part of the same network. It enables broadcasting of traffic information or a PTY

programme from a station which is part of the same network as the station to which you are listening.

This service is available when you have selected the TA traffic information programme or the PTY function.

COMPACT DISC

Selecting the CD as source

After inserting a disc, with the printed surface upwards, the player starts automatically.

If a disc is already inserted, press the "K" button.

Ejecting a disc

Press button “A” to eject the disc from the player.

Selecting a track

Press button “G” to select the next track.

Press button “H” to return to the start of the current track or to select the previous track.

Accelerated play

Press the “MAN” button.

Keep button “G” or “H” pressed for forwards or backwards accelerated play.

Accelerated play stops as soon as you release the button.

Buttons “G” and “H” resume the “track selection” function when the “MAN” button is pressed again.

Shuffle (RDM)

When the CD is selected, keep the “K” button pressed for two seconds. The tracks will be played in random

sequence. Pressing the “K” button again for two seconds returns you to normal play.

Downloaded from www.Manualslib.com manuals search engine

73

YOUR 306 IN DETAIL

EON system

This connects stations which are part of the same network. It enables broadcasting of traffic information or a PTY

programme from a station which is part of the same network as the station to which you are listening.

This service is available when you have selected the TA traffic information programme or the PTY function.

COMPACT DISC

Selecting the CD as source

After inserting a disc, with the printed surface upwards, the player starts automatically.

If a disc is already inserted, press the "K" button.

Ejecting a disc

Press button “A” to eject the disc from the player.

Selecting a track

Press button “G” to select the next track.

Press button “H” to return to the start of the current track or to select the previous track.

Accelerated play

Press the “MAN” button.

Keep button “G” or “H” pressed for forwards or backwards accelerated play.

Accelerated play stops as soon as you release the button.

Buttons “G” and “H” resume the “track selection” function when the “MAN” button is pressed again.

Shuffle (RDM)

When the CD is selected, keep the “K” button pressed for two seconds. The tracks will be played in random

sequence. Pressing the “K” button again for two seconds returns you to normal play.

Downloaded from www.Manualslib.com manuals search engine

74

YOUR 306 IN DETAIL

CD MULTI-CHANGER

Selecting the CD multi-changer

Press the “L” button.

Selecting a disc

Press a button from “1” to “6” to select the corresponding disc.

Selecting a track

Press button “G” to select the next track.

Press button “H” to return to the start of the current track or to select the previous track.

Accelerated play

Press the “MAN” button.

Keep button “G” or “H” pressed for forwards or backwards accelerated play.

Accelerated play stops as soon as you release the button.

Buttons “G” and “H” resume the “track selection” function when the “MAN” button is pressed again.

Shuffle (RDM)

When the CD multi-changer is selected, keep the “L” button pressed for two seconds. The tracks will be played

in random sequence. Pressing the “L” button again for two seconds returns you to normal play.

Downloaded from www.Manualslib.com manuals search engine

75

YOUR 306 IN DETAIL

CD CHANGER (Available as an accessory

C

B

A

To insert a disc into the changer:

– open sliding panel A,

– press button B to eject the cartridge C,

– open one of the six compartments of the cartridge by pulling tab D,

– insert the disc with the printed face upwards and close the

C

D

compartment,

– insert the cartridge into the changer,

– close the sliding panel A.

Downloaded from www.Manualslib.com manuals search engine

76

YOUR 306 IN DETAIL

RADIO/NAVIGATION "Travel Pilot"

Note : Do not drive with the front panel flap open.

*According to specification

The instructions for using the Radio/Navigation «Travel Pilot» are attached to the CD, on delivery of the vehicle.

Downloaded from www.Manualslib.com manuals search engine

77

YOUR 306 IN DETAIL

CD CHANGER (Available as an accessory)

C

B

A

To insert a disc into the changer:

– open sliding panel A,

– press button B to eject the cartridge C,

– open one of the six compartments of the cartridge by pulling tab D,

– insert the disc with the printed face upwards and close the

C

D

compartment,

– insert the cartridge into the changer,

– close the sliding panel A.

Downloaded from www.Manualslib.com manuals search engine

306 in detail -> Audio Systems (RB1, RD1, Travel Pilot, CD Changer) for Your Peugeot 306 4 Door First Generation (1993-2002)

Related Topics

306 in detail