First activation/memorising a
reference speed
CRUISE CONTROL*
Instrument panel display
As soon as you reach the chosen
speed, press button 2 3. This mem-
orises the speed and the display indi-
cates (e.g. at 70 mph (110 km/h)):
This cruise control, of the new
generation, is linked with the speed
limiter. It has a display on the instru-
ment panel to indicate the memo-
rised reference speed.
It enables the vehicle to maintain a
steady speed programmed by the
driver.
In order for it to be memorised or ac-
tivated, the vehicle speed must be
greater than 25 mph (40 km/h) with
at least fourth gear engaged for vehi-
cles fitted with a manual gearbox.
Note: It is possible to accelerate
and drive momentarily at a speed
greater than the memorised speed.
The value memorised flashes. When
the accelerator pedal is released, the
vehicle will return to the memorised
speed.
When the cruise control function
is activated, pressing this button
enables you to display the distance
recorders.
After a few seconds or when this
button is pressed again, the display
returns to the cruise control function.
Cancelling the cruise control
If you wish to cancel the cruise control:
Selecting the function
Place switch 1 in the CRUISE
position. The cruise control is
not yet active and no speed has
been memorised. The display in-
dicates:
On vehicles fitted with an automatic
gearbox, the lever must be in posi-
tion D, or in at least second gear in
sequential mode.
Press button 4 or the brake or
clutch pedal.
The display indicates (e.g. at 70 mph
(110 km/h)):
* According to country.
100
English 
