Reactivating the cruise control
To memorise a speed lower than the
previous one:
press button 2;
A brief press decreases by 1 mph
(1 km/h).
When changing the memo-
rised reference speed by
means of a maintained press,
pay attention as the speed
can increase or decrease rapidly.
Do not use the cruise control on slip-
pery roads or in heavy traffic.
After cancellation of the cruise con-
trol, press button 4. Your vehicle will
return to the last memorised speed.
The display indicates (e.g. at 70 mph
(110 km/h)):
An extended press decreases by
5 mph (5 km/h).
A maintained press decreases in
steps of 5 mph (5 km/h).
In the event of a steep slope, the
cruise control cannot prevent the
vehicle from exceeding the pro-
grammed speed.
In any event, the cruise control can-
not replace the need to comply with
speed limits, nor can it replace the
need for vigilance and responsibility
on the part of the driver.
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat is positioned
correctly.
- never fit one mat on top of another.
Cancelling the memorised
reference speed
When the vehicle becomes
stationary, after switching off the
ignition, the system no longer
memorises a speed.
Changing the memorised
reference speed
To memorise a speed higher than the
previous one, there are two options:
Without using the accelerator:
press button 3;
A brief press increases by 1 mph
(1 km/h).
An extended press increases by
5 mph (5 km/h).
Switching the function off
Place dial 1 in position 0 to switch
the system off.
Operating fault
In the event of a cruise control mal-
function, the memorised speed is
erased, the dashes flash for a few
seconds:
A maintained press increases in
steps of 5 mph (5 km/h).
Using the accelerator:
exceed the memorised speed un-
til the required speed is reached,
press button 2
3
Contact a PEUGEOT dealer to have
the system checked.
101
English 
