DRIVING
Programming
Operating fault
In the event of a cruise control malfunc-
tion, the speed is cleared resulting in
flashing of the dashes.
Turn dial 1 to the "CRUISE"
position: the cruise control mode
is selected but is not switched on
(OFF).
Have it checked by a PEUGEOT dealer.
Set the programmed speed by
accelerating to the required
speed, then press button 2 or 3
(e.g.: 70 mph (110 km/h)).
You can then change the programmed speed using buttons
2 and 3:
-
-
-
by + or - 1 mph (km/h) = short press,
by + or - 5 mph (km/h) = long press,
in steps of + or - 5 mph (km/h) = maintained press.
Switch off the cruise control by pressing button 4: the
display confirms that it has been switched off (OFF).
!
When the cruise control is switched
on, be careful if you maintain the
pressure on one of the programmed
speed changing buttons: this may
result in a very rapid change in the
speed of your vehicle.
Switch the cruise control back on by pressing button
4 again.
Do not use the cruise control on
slippery roads or in heavy traffic.
On a steep descent, the cruise
control will not be able to prevent
the vehicle from exceeding the pro-
grammed speed.
To avoid any risk of jamming of the
pedals:
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed
speed results in flashing of this speed on the display.
Return to the programmed speed, by means of intentional or
unintentional deceleration of the vehicle, automatically can-
cels the flashing of the speed.
-
ensurethatthematispositioned
correctly,
never fit one mat on top of
Return to normal driving
-
another.
Turn dial 1 to the "0" position: the cruise control mode
is deselected. The display returns to the distance
recorder.
English 