DRIVING
Moving off
Automatic operation
Sport and snow programmes
Apply the handbrake.
Select position P or N.
Start the engine.
Select position D for automatic These two special programmes supple-
changing of the four or six gears.
ment the automatic operation in very
specific conditions of use.
If this procedure is not followed, an au-
dible signal is heard, accompanied by a
message on the multifunction display.
With the engine running, press the
brake pedal.
Release the handbrake.
Select position R, D or M,
Gradually release the brake pedal.
The vehicle moves off immediately.
The gearbox then operates in auto-
adaptive mode, without any intervention
on the part of the driver. It continuously
selects the most suitable gear accord-
ing to the style of driving, the profile of
the road and the load in the vehicle.
For maximum acceleration without
touching the lever, press the accelera-
tor pedal down fully (kick down). The
gearbox changes down automatically
or maintains the gear selected until the
maximum engine speed is reached.
Sport programme "S"
Press button "S", after starting the
engine.
The gearbox automatically favours a
dynamic style of driving.
S appears on the instrument
panel.
Snow programme ""
Press button "", after starting the
engine.
The gearbox adapts to driving on slip-
pery roads.
This programme improves starting and
drive when traction is poor.
On braking, the gearbox changes down
automatically to provide efficient engine
braking.
If you release the accelerator sharply,
the gearbox will not change to a higher
gear for safety reasons.
If position N is engaged inadvert-
ently while driving, allow the engine
to return to idle then engage posi-
tion D to accelerate.
i
When the engine is running at idle,
appears on the instrument
panel.
!
with the brakes released, if position
R, D or M is selected, the vehicle
moves even without the accelera-
tor being pressed.
!
Never select position N while the Return to automatic operation
vehicle is moving.
When the engine is running, never
leave children in the vehicle with-
out supervision.
When carrying out maintenance
with the engine running, apply the
handbrake and select position P.
At any time, press the button
Never select positions P or R unless
selectedagaintoquittheprogramme
the vehicle is completely stationary.
engaged and return to auto-adaptive
mode.
144