DRIVING
Programming
Operating fault
Turn dial 1 to the "LIMIT" position:
the speed limiter mode is selected
but is not switched on (OFF).
In the event of a speed limiter malfunc-
tion, the speed is cleared resulting in
flashing of the dashes.
You do not have to switch the speed
limiter on in order to set the speed.
Have the system checked by a PEUGEOT
dealer.
Set the speed value by pressing button 2 or 3 (e.g.:
55 mph (90 km/h)).
You can then change the programmed speed using buttons
2 and 3:
-
-
-
by + or - 1 mph (km/h) = short press,
by + or - 5 mph (km/h) = long press,
in steps of + or - 5 mph (km/h) = maintained press.
Switch the speed limiter on by pressing button 4.
Switch the speed limiter off by pressing button 4: the
display confirms that it has been switched off (OFF).
Switch the speed limiter back on by pressing button 4
again.
Exceeding the programmed speed
Pressing the accelerator pedal to exceed the programmed
speed will not have any effect unless you press the pedal
firmly past the point of resistance.
The speed limiter is deactivated temporarily and the pro-
grammed speed, which is still displayed, flashes.
Returning to the programmed speed, by means of intention-
al or unintentional deceleration of the vehicle, automatically
cancels the flashing of the programmed speed.
!
On a steep descent or in the event
of sharp acceleration, the speed
limiter will not be able to prevent
the vehicle from exceeding the pro-
grammed speed.
To avoid any risk of jamming of the
pedals:
-
ensurethatthematispositioned
correctly,
do not fit one mat on top of
Return to normal driving
-
another.
Turn dial 1 to the "0" position: the speed limiter mode
is deselected. The display returns to the distance
recorder.
English 