MULTIFUNCTION DISPLAYS
MONOCHROME SCREEN A
Controls
General menu
Press the "MENU" button to gain
access to the general menu, then
press the "" or "" buttons to
scroll through the various menus:
- radio-CD,
- vehicle configuration,
- options,
- display settings,
- languages,
- units.
From the RD4 audio equipment control
panel, you can:
press the "MENU" button to gain
access to the general menu,
press the "" or "" buttons to
scroll through the items on the
screen,
press the "MODE" button to change
the permanent application (trip
computer, audio source, ...),
Displays on the screen
This displays the following information:
Press the "OK" button to select the
menu required.
-
-
-
the time,
the date,
the outside temperature* (this flashes
if there is a risk of ice),
RadioꢀCD
press the "" or "" buttons to
change a setting value,
press the "OK" button to confirm,
or
press the "ESC" button to abandon
the operation in progress.
-
the status of the accesses (doors,
boot, ...),
the audio sources (radio, CD, ...),
the trip computer (refer to the end of
the section).
With the RD4 audio equipment switched
on, once the "Radio-CD" menu has been
selected you can activate or deactivate
the functions linked with use of the radio
(RDS, REG), the CD or the CD changer
(introscan, shuffle, CD repeat).
For further details concerning the
"Radio-CD" application, refer to the
RD4 part of the "Audio and Telematics"
section.
-
-
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Boot open") may ap-
pear temporarily. These can be cleared
by pressing the "ESC" button.
* With air conditioning only.
39
English 