MULTIFUNCTION DISPLAYS
MONOCHROME SCREEN C AND Controls
COLOUR SCREEN C
General menu
Press the "MENU" button to gain
access to the general menu:
- audio functions,
- vehicle diagnostics,
- personalisation-configuration,
- telephone (hands-free kit).
From the RD4 audio equipment control
panel, you can:
Press the "" or "" buttons to
select the menu required, then
confirm by pressing the "OK"
button.
press the "MENU" button to gain
access to the general menu,
press the "" or "" buttons to
scroll through the items on the
screen,
press the "MODE" button to change
the permanent application (trip
computer, audio source, ...),
press the "" or "" buttons to
change a setting value,
press the "OK" button to confirm,
or
press the "ESC" button to abandon
the operation in progress.
Displays on the screen
This displays the following information:
-
-
-
the time,
the date,
the outside temperature* (this flashes
"Audio functions" menu
if there is a risk of ice),
-
the status of the accesses (doors,
boot, ...),
the audio sources (radio, CD, ...),
the trip computer (refer to the end of
the section).
With the RD4 audio equipment switched
on, once this menu has been select-
ed you can activate or deactivate the
functions linked with use of the radio
(RDS, REG, RadioText), the CD or the
CD changer (introscan, shuffle, CD
repeat).
For further details concerning the "Audio
functions" application, refer to the RD4
part of the "Audio and Telematics"
section.
-
-
Warning messages (e.g.: "Emission
control system faulty") or information
messages (e.g.: "Automatic switching
on of the headlamps activated") may ap-
pear temporarily. These can be cleared
by pressing the "ESC" button.
* With air conditioning only.
41
English 