MULTIFUNCTION DISPLAYS
Adjusting the position of the screen
i
If you close the screen during
operation of the audio/telephone,
it will only re-open automatically
when an outgoing telephone call is
made, when a voice command is
given or when a warning message
linked with the STOP warning light
is received.
Closing the screen
With the screen open, press control
A to store it.
Access to the screen
The screen is stored automatically
when the ignition is switched off, after
approximately three seconds, if the
audio/telephone is off.
When the screen is open, you can ad-
just it precisely in different ways:
press the corresponding part of
controlBtomovethescreentowards
you or towards the windscreen,
This screen is opened and stored auto-
matically.
However, you can also open it, store it
and adjust it using the various manual
controls:
or
push or pull the screen gently by
hand.
Safety autoꢀreverse
-
opening or storing by means of
control A,
angle adjustments by means of
control B.
If the screen meets an obstacle as it
opens or closes, the movement stops
immediately and is reversed by a
few millimetres.
After clearing the obstacle, issue the
command required again.
-
It is also fitted with safety auto-reverse
protection.
Storing the position of the screen
The system has four pre-set positions
in its memory.
Each time the screen is closed, the
system stores the last position of the
screen.
Each time the screen is re-opened, the
system returns the screen to the pre-set
position closest to that stored.
Opening the screen
With the screen stored, press control A
to open it.
The screen opens automatically when
the ignition is switched on, when the
audio/telephone is switched on, when
an outgoing telephone call is made,
when a voice command is given and
when a warning message linked with
the STOP warning light is received.
i
If you wish the screen to continue to
open or close automatically when
the audio/telephone is switched
on or off, the screen must not be
closed when the audio/telephone is
operating.
45
English 