Download User Manual App

Quickly access user manual for free!

Ease of use and comfort -> Boot fittings (SW) for Your Peugeot 308 4 Door Second Genration (2014-2020)

Ease of use and comfort  
Boot fittings (hatchback)  
Boot fittings (SW)  
7. Rings for fixing a net (to restrain luggage)  
(depending on version)  
F Extract the rings one at a time then slide  
them into the oblong housing.  
F While pressing the button, move the ring to  
the desired position.  
F Observe the direction of fitting (rings in the  
vertical position towards the outside of the  
vehicle).  
1. Rear shelf  
1. Boot lamp  
Warning triangle (stowing)  
2. Boot floor  
2. Rear seat folding controls  
3. 12 V accessory socket (120 W max.)  
Raise the floor for access to the storage.  
This safety equipment should be used in  
addition to the hazard warning lamps.  
Its presence in the vehicle may be mandatory,  
depending on country.  
3. Storage wells, where are stowed:  
4. Removable storage wells  
-
-
-
the towing eye,  
Pull up to unclip them.  
the temporary puncture repair kit,  
the spare wheel depending on trim  
level, optional or as standard.  
5. Storage wells, where are stowed:  
-
-
-
the towing eye,  
the temporary puncture repair kit,  
the spare wheel depending on trim  
level, optional or as standard.  
4. Stowing rings  
5. Strap (depending on version)  
6. Load space cover  
(see corresponding section)  
62  
Ease of use and comfort  
A recess in the well, underneath the boot  
carpet, allows you to load the load space cover  
diagonally.  
F Remove the guides of the blind from the  
rails in the boot pillars.  
F Release the blind, it rolls up automatically.  
This recess is not available with the bass  
woofer unit.  
Removal  
Installation  
3
The storage location for a folded triangle or its  
box is under the boot floor.  
Load space cover,  
blind (SW)  
F Place your hand underneath the load  
space cover on the left.  
F Pivot the end of the reel towards the front  
(clockwise) to disengage it.  
When sharp deceleration occurs, objects  
placed on the load space cover can turn  
into projectiles.  
F Position the left, then the right end of  
the load space cover in their respective  
housings.  
F Proceed in the same way for the right side  
(anti-clockwise).  
To reel in  
F Put your hands on the reel, then pivot the  
whole unit towards the rear to engage it.  
F Unwind the blind until it locks on the boot  
pillar.  
Storage  
63