Get Ease of use and comfort -> Interior fittings Guide for Peugeot 308 4 Door Second Genration (2014-2020)

Ease of use and comfort

Interior ﬁttings

When repositioning the rear seat, be sure

to not trap the seatbelts and to position

their buckles correctly.

Outer rear seat head restraints

These have a position for use (up) and a

stowed position (down).

They can be removed and are interchangeable.

F Pull the control 1 forwards, the backrest

folds onto the seat.

Repositioning the seat

To remove a head restraint:

F pull the head restraint fully upwards,

F then, press the lug A.

F Straighten the backrest and secure it.

F Check that the red indicator, located next to

control 1, is no longer visible.

The central head restraint cannot be

adjusted.

F Raise or put the head restraints back in

place.

Never drive with the head restraints

removed; they must be fitted and correctly

adjusted.

1. Refrigerated glove box fitted with an air

vent.

58

Ease of use and comfort

2. 12 V accessory socket (120 W)

Observe the maximum power rating to avoid

damaging your accessory.

Fitting

Front armrest

When fitting the mat for the first time, on the

driver's side use only the fixings provided in the

wallet provided.

The other mats are simply placed on the

carpet.

The height and longitudinal position of the

armrest cover can be adjusted for greater

comfort.

3. USB port

4. Cup holder/can holder (depending on

version)

Height adjustment

5. Storage (depending on version)

Removing

6. Storage – Removable cup holder/can holder

Turn the carrier over for access to the cup

holder/can holder.

To remove the mat on the driver's side:

F move the seat as far back as possible,

F unclip the fixings,

3

7. Front armrest

F remove the mat.

8. 220 V socket (120 W) or USB port

(depending on version)

Reﬁtting

F Raise the cover to the required position

(low, intermediate or high).

F If you raise the cover slightly beyond the

high position, guide it when lowering it to the

low position.

Observe the maximum power rating to avoid

damaging your accessory.

To refit the mat on the driver's side:

F position the mat correctly,

F reattach the fixings by pressing,

F check that the mat is secured correctly.

Mats

Longitudinal adjustment

To avoid any risk of jamming the pedals:

-

Only use mats which are suited to the

fixings already present in the vehicle;

these fixings must be used.

-

Never fit one mat on top of another.

The use of mats not approved by

PEUGEOT may interfere with access to

the pedals and hinder the operation of the

cruise control/speed limiter.

F Slide the cover fully forwards or rearwards.

The mats approved by PEUGEOT have

two fixings located below the seat.

59

Ease of use and comfort

Storage

The connection of an electrical device

not approved by PEUGEOT, such as a

USB charger, may adversely affect the

operation of vehicle electrical systems,

causing faults such as poor radio

reception or interference with displays in

the screens.

When the USB port is used, the portable

device charges automatically.

While charging, a message is displayed

if the power consumption of the portable

device exceeds the amperage supplied by

the vehicle.

For more information on how to use this

equipment, refer to the Audio equipment

and telematics section.

USB ports

F Raise the paddle.

F Raise the cover fully.

220 V/50 Hz socket

12 V accessory socket

A 220 V/50 Hz socket (max. power: 120 W) is

fitted in the rear storage box.

This socket works with the engine running, as

well as in STOP mode of Stop & Start.

These allow the connection of a portable

device, such as an iPod^®type digital audio

player, to recharge the device.

The USB port located at the front

also allows a smartphone to be

connected by MirrorLink^TM, Android

Auto^®or CarPlay^®, so that certain

applications on the smartphone can

be used on the touch screen.

F To connect a 12 V accessory (maximum

power: 120 watts), lift the cover and plug in

the correct adapter.

Observe the maximum power rating to

avoid damaging your accessory.

You can manage these applications using the

steering mounted controls or the audio system.

F Open the storage box.

60

Ease of use and comfort

F Press the flap opening control.

F Check that the indicator lamp is on and

green.

Rear armrest

F Lower the flap.

F Connect your multimedia or other electrical

device (telephone charger, laptop computer,

CD-DVD player, bottle warmer, etc.).

F Load the objects from inside the boot.

In the event of a fault with the socket, the green

indicator lamp flashes.

Have it checked by a PEUGEOT dealer or a

qualified workshop.

Do not leave the flap open when not

carrying long objects in the vehicle.

3

Load space cover/blind

Connect only one device at a time to the

socket (no extension lead or multi-socket

connector).

Connect only devices with class II

insulation (shown on the device).

As a safety measure, when electrical

consumption is high and when required by

the vehicle's electrical system (particular

weather conditions, electrical overload,

etc.), the current supply to the socket will be

cut off; the green indicator lamp goes off.

Objects placed on the load space cover

can turn into projectiles during sudden

deceleration.

F Lower the rear armrest for a more

comfortable position.

It may be fitted with cup holders and also gives

access to the ski flap.

Ski flap

It allows long objects to be carried in the vehicle.

The different "ports and sockets" may be

either not available, an option or standard,

depending on the trim level of the vehicle.

F Lower the armrest.

61

Download User Manual App

Ease of use and comfort -> Interior fittings for Your Peugeot 308 4 Door Second Genration (2014-2020)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals