Get INSTRUMENTS and CONTROLS Guide for Peugeot 4007 4 Door 2012-2017

INSTRUMENTS and CONTROLS

INSTRUMENT PANEL

1

Screen type 1

Panel grouping together the dials and 3. Instrument panel screen:

warning/indicator lamps. These inform

- Warning and status displays.

- Total and trip distance recorders.

- Service indicator.

the driver of the activation/deactivation

of a system or of the occurrence of a

fault.

- Coolant temperature.

- Trip computer information.

- Cruise control setting.

1. Rev counter.

2. Speedometer.

-

Dashboard lighting and parameter

settings.

- Fuel level.

- Ambient temperature.

- Transmission mode.

Screen type 2

INSTRUMENTS and CONTROLS

INSTRUMENT PANEL WARNING LAMPS

Warning lamp

is on

Cause

Actions/Observations

1

If this indicator lamp ﬂashes abnormally quickly,

this could indicate that the bulb of one of the

direction indicators has blown. Change the bulb

or contact a PEUGEOT dealer or a qualiﬁed

workshop.

Flashing

with

audible

warning

Left-hand

direction

indicator

This ﬂashes when you

press the lighting stalk

down.

If this indicator lamp ﬂashes abnormally quickly,

this could indicate that the bulb of one of the

direction indicators has blown. Change the bulb

or contact a PEUGEOT dealer or a qualiﬁed

workshop.

Flashing

with

Right-hand

direction

indicator

This ﬂashes when you

audible push the lighting stalk up.

warning

This comes on when

you pull the lighting stalk

towards you.

Main beam

headlamps

Pull the stalk to return to dipped beam

headlamps.

Fixed

This comes on when the

lighting stalk is in the

"Sidelamps" or "Dipped

beam headlamps"

position.

Sidelamps

Turn the stalk to the desired position.

This comes on when you Turn the ring on the stalk forwards to switch on

use the front foglamps. the foglamps.

Front foglamps

Rear foglamps

Cruise control

Fixed

This comes on when you Turn the ring on the stalk forwards to switch on

use the rear foglamps.

the foglamps.

This comes on when the

mode is active.

Press the "ON/OFF" button to activate/

deactivate the mode.

INSTRUMENTS and CONTROLS

Warning lamp

is on

Cause

Actions/Observations

Wait until this goes off before starting.

The duration for which this is on is determined by

the exterior climatic conditions.

1

This comes on when the

ignition switch is in the

ON position.

Diesel

preheating

Fixed

This comes on for a

few seconds when the

It is accompanied by a message on the

ignition is turned to "ON" instrument panel screen.

then goes off.

The parking brake is It is accompanied by a message on the

applied or has not been instrument panel screen. Release the parking

Parking brake/

Brake ﬂuid level

Fixed

released fully.

brake to switch off the warning lamp.

It is accompanied by a message on the

instrument panel screen. Top up with brake ﬂuid

and contact a PEUGEOT dealer or a qualiﬁed

workshop.

The brake ﬂuid level is

too low.

Contact a PEUGEOT dealer or a qualiﬁed

workshop.

It should go off a few seconds after starting the

engine.

This comes on or

ﬂashes in the event of a

fault with the system.

Emission

control system

Fixed or

ﬂashing

It should go off when the engine is started.

This comes on if a

charging circuit fault

occurs.

It is accompanied by a message on the

instrument panel screen. Check the battery

terminals (refer to the "Battery" section).

Battery charge

Fixed

INSTRUMENTS and CONTROLS

Warning lamp

is on

Cause

Actions/Observations

1

The driver has not

fastened or has

unfastened their seat

belt.

This is accompanied by a message on the

instrument panel screen.

Fasten the driver's seat belt.

Driver's

seat belt not

fastened

Fixed

It is accompanied by a message in the instrument

This comes on if an anti- panel screen. The vehicle retains conventional

ABS

Fixed

lock braking system fault braking without assistance but you are advised to

occurs.

stop. Have it checked by a PEUGEOT dealer or

a qualiﬁed workshop.

This comes on for a

few seconds when the

ignition is turned to "ON"

then goes off.

It should go off when the engine is started. If it

does not go off, contact a PEUGEOT dealer or a

qualiﬁed workshop.

Airbags and

pretensioners

Fixed

It is accompanied by a message on the

instrument panel screen. Have the system

checked by a PEUGEOT dealer or a qualiﬁed

workshop without delay.

This comes on if an

airbag or pretensioner

fault occurs.

It is accompanied by a message on the

instrument panel screen. Have the system

checked by a PEUGEOT dealer or a qualiﬁed

workshop without delay.

Dynamic

stability control

system (ASC)

This comes on if a

dynamic stability control

system fault occurs.

INSTRUMENTS and CONTROLS

INSTRUMENT PANEL DISPLAYS

Each time the engine is started: a series of warning lamps and/or messages come on, applying a checking self test. They go

off after a few seconds. Engine running: the warning lamp or the message becomes a warning if it remains on continuously

or ﬂashes. This initial warning may be accompanied by an audible signal and a message on the screen. Do not ignore these

warnings.

1

The messages displayed may differ between the type 1 instrument panel and the type 2 instrument panel.

When the cause of the appearance of the warning lamp or warning message has been rectiﬁed, the warning disappears

from the screen automatically. If the cause of the warning is not rectiﬁed, you can return to the previous screen at any time

by pressing the INFO button on the dashboard.

The symbol "!" is displayed.

To return to the previous screen (with the "!" symbol), you must press the INFO button several times.

Symbols which appear in the top right corner of the screen.

You can close the warning messages which show these symbols in order to move on to the next screen.

To do this, press the INFO button according to the symbol displayed.

Press brieﬂy.

Press and hold.

Warning messages (ignition at "OFF")

Message

is on

Cause

Solution - action

Observations

Only if the engine has

been started.

An intermittent audible

signal is heard.

The driver's door is open

and you have forgotten

to remove the key from

the ignition.

Turn the ignition switch

to the LOCK position

and remove the key.

Key in

ignition

Fixed

You have forgotten to

switch off the vehicle

lighting.

Switch off the vehicle

lighting by placing the

stalk at OFF.

Lighting left

on

An intermittent audible

signal is heard.

Fixed

INSTRUMENTS and CONTROLS

Warning messages (ignition at "ON")

Message

is on

Cause

Solution - action

Observations

1

The vehicle retains

Contact a PEUGEOT

dealer or a qualiﬁed

workshop.

Anti-lock braking system

(ABS) fault.

conventional braking

without assistance but

you are advised to stop.

ABS

Fixed

Stop and top up, otherwise If the message remains on

Associated warning lamp.

The level of brake ﬂuid in

the reservoir is too low.

contact a PEUGEOT

dealer or a qualiﬁed

workshop.

after topping up, contact

a PEUGEOT dealer or a

qualiﬁed workshop.

Braking

system

Fixed

Associated warning

lamp.

Braking system fault.

Contact a PEUGEOT

dealer or a qualiﬁed

workshop.

You must stop as

soon as it is safe to

do so.

You have moved off with

the parking brake still

applied.

Parking brake

on

Fixed

Release the parking brake.

If the message ﬂashes,

wait for the engine to cool

before topping up the level,

if necessary.

Flashing

You must stop your

vehicle as soon as it

is safe to do so.

Coolant

temperature

High engine

temperature.

If the message ﬂashes

and the service warning

light comes on, contact

a PEUGEOT dealer or

a qualiﬁed workshop

without delay.

Flashing

Fixed

The driver has not fastened

or has unfastened his seat Fasten your seat belt.

belt.

There is an intermittent

audible signal above

5 mph (8 km/h).

Seat belt

INSTRUMENTS and CONTROLS

Message

is on

Cause

Solution - action

Observations

1

Contact a PEUGEOT

dealer or a qualiﬁed

workshop.

Fault in the airbags or

pretensioners.

Airbags

Fixed

Problem in one of the

systems which does

not have a speciﬁc

message.

Stop the vehicle and

contact a PEUGEOT

dealer or a qualiﬁed

workshop.

To identify the problem,

contact a PEUGEOT

dealer or a qualiﬁed

workshop.

!

Service

Fixed

Stop the vehicle and

contact a PEUGEOT

dealer or a qualiﬁed

workshop.

Engine oil pressure too

low or fault in the engine

lubrication system.

Engine oil

pressure

Stop the vehicle and

Engine oil level too low. check the level using the

dipstick.

Engine oil

level

If there is a lack of oil,

top up the level.

Low fuel

warning

Refuel as soon as

The fuel level is low.

possible.

Contact a PEUGEOT

dealer or a qualiﬁed

workshop.

Fuel system

Fuel system fault.

Opening

not closed

correctly

One of the doors or the

tailgate is not closed

correctly.

The opening concerned

is indicated on the

screen.

Close the door or the

tailgate.

INSTRUMENTS and CONTROLS

Message

Dynamic

is on

Cause

Solution - action

Observations

1

Contact a PEUGEOT

dealer or a qualiﬁed

workshop.

stability

control system

(ASC)

Dynamic stability control

system (ASC) fault.

Fixed

Four wheel drive

transmission system

fault.

Contact a PEUGEOT

dealer or a qualiﬁed

workshop.

Four wheel

drive system

Fixed

The temperature of

the four wheel drive

transmission system is

too high.

Stop the vehicle and

contact a PEUGEOT

dealer or a qualiﬁed

workshop.

Four wheel

drive system

temperature

The vehicle switches to

front wheel drive (2 WD)

mode automatically.

Automatic

headlamp

adjustment

system

Contact a PEUGEOT

dealer or a qualiﬁed

workshop.

The automatic headlamp

adjustment is faulty.

Only on vehicle ﬁtted

with xenon bulbs.

Stop the vehicle and

contact a PEUGEOT

dealer or a qualiﬁed

workshop.

Battery charge

Battery charge fault.

Road icy.

Take care and drive

slowly.

The ambient

temperature is 3 °C

(37 °F) or below.

Caution: The road may

be icy even when this

screen is not displayed.

Ambient

temperature

INSTRUMENTS and CONTROLS

Message

is on

Cause

Solution - action

Observations

1

As soon as trafﬁc

conditions permit,

regenerate the ﬁlter by

driving at a speed of at

least 35 mph (60 km/h)

until the message is

cleared.

If the message is still

displayed, contact a

PEUGEOT dealer or a

qualiﬁed workshop.

Saturation of

the particle

emission ﬁlter

Start of saturation of the

particle emission ﬁlter.

Fixed

Have the level topped

up by a PEUGEOT

dealer or a qualiﬁed

workshop without delay.

Diesel

additive level

Low Diesel additive

level.

Fixed

The presence of water

in the Diesel ﬁlter is

indicated.

Risk of damage to the

injection system on

Diesel engines.

Water in the

Diesel ﬁlter

(according to

country)

Contact a PEUGEOT

dealer or a qualiﬁed

workshop without delay.

Fixed

INSTRUMENTS and CONTROLS

Information messages (ignition at "ON")

Message

is on

Status of the system

1

2WD two wheel

drive system

When the "2WD" (2 wheel drive) mode is selected using

the transmission mode selector.

Flashing

When the "4WD" (4 wheel drive) mode is selected using

the transmission mode selector.

This mode is the default mode.

4WD four wheel

drive system

Flashing

4WD LOCK four

wheel drive system

When the "LOCK" (4 wheel drive) mode is selected using

the transmission mode selector.

This indicates the ambient temperature.

Ambient

temperature

When the vehicle is stationary or if the speed is below 12 mph

(20 km/h) the temperature displayed may not be the true

temperature.

Fixed

Prevention messages

Display

is on

Cause

Solution - action

Observations

Informs the driver of

the time remaining

before the vehicle’s

scheduled service.

Contact a

This is displayed for a few

seconds when the ignition is

switched on.

Service

indicator

PEUGEOT dealer

or a qualiﬁed

workshop.

Fixed

This is displayed when the

driving time that you set

previously is reached.

An audible signal is heard

3 times and is then heard

every 5 minutes until the

vehicle stops.

Informs the driver that

they should stop to

take a break.

Break

advised

You are advised to

take a break.

Fixed

INSTRUMENTS and CONTROLS

Distance recorder (A and B)

Range

INFORMATION IN THE

INSTRUMENT PANEL SCREEN

The total distance is

displayed in zone

of the screen and the

trip distance in zone 2

(refer to the "Distance

recorders" section).

When the engine is

running, this indicates

the number of miles

1

Information display

1

(kilometres) which can

still be travelled with the

fuel remaining in the tank

based on the average

fuel consumption over

the last few miles (kilometres) travelled

(refer to the "Range" section).

Service indicator

This displays the distance

and the number of months

remaining before the

next service in line with

with the manufacturer’s

servicing schedule (refer

to the "Service indicator"

section).

Trip computer

This indicates the average

fuel consumption, the

average speed and the

current fuel consumption

(refertothe"Tripcomputer"

section).

With the ignition on, press the INFO

button, located on the dashboard to the

right of the instrument panel, to display

the various information in succession:

-

distance recorder A,

distance recorder B,

service indicator,

coolant temperature,

range,

Coolant temperature

Setting menu

When the vehicle is

stationary, this allows the

user to change the following

settings (refer to the "Setting

menu" section):

When the engine is

running, this indicates

the temperature of the

coolant (refer to the

"Coolant

indicator" section).

trip computer,

setting menu.

temperature

-

the display language,

the temperature dis-

play units,

-

the fuel consumption units,

the option to reset the average

fuel consumption and the average

speed,

-

the break (rest) reminder display in-

terval.

INSTRUMENTS and CONTROLS

DISTANCE RECORDERS (A/B)

COOLANT TEMPERATURE

RAN

GE

When the engine is

running, this indicates

the distance which can

still be travelled with the

fuel remaining in the tank

based on the average

fuel consumption over

the last few miles/

kilometres travelled.

System for measuring the total distance

travelled by the vehicle during its service

life and the distance travelled in a day

or other period until it is reset to zero by

the driver.

When the engine is

running, this indicates

the temperature of the

coolant.

1

The total distance is

displayed in zone 1 of

the screen and the trip

distance in zone 2.

If the bar is close to the critical position

located on the right, the temperature is

too high.

When the range is less than 30 miles

(50 km), dashes are displayed.

Refuel as soon as possible. The display

of the range is updated.

The symbol ﬂashes when your engine

is overheating.

Zero reset

You must stop your vehicle as soon

as it is safe to do so.

Wait a few minutes before switching

off the engine.

With the ignition on, press the INFO

button for more than 2 seconds until

zeros appear.

This ﬁgure may increase

following a change in the style

of driving or the relief, resulting

in a reduction in the current fuel

consumption.

If you only add a few litres, the

value displayed will be incorrect.

Therefore, you must ﬁll the tank

whenever possible.

Wait for the engine to cool before

topping up the level. The cooling

system is pressurised.

To avoid any risk of scalding,

unscrew the cap by two turns to

allow the pressure to drop.

When the pressure has dropped,

remove the cap and top up the

level, if necessary.

Whenyoudisconnectthebattery,

the previous fuel consumption

data is lost and the value

displayed will be different from

that displayed before the battery

was disconnected. The distance

displayed must be considered

an approximate indication.

Contact a PEUGEOT dealer or

a qualiﬁed workshop.

INSTRUMENTS and CONTROLS

Example: the display indicates that

7300 miles (kilometres) remain before

the next service is due.

SERVICE INDICATOR

Resetting the service indicator

to zero

System which informs the driver when

the next service is due in accordance

with the manufacturer's servicing

schedule.

Your PEUGEOT dealer or a qualiﬁed

workshop carries out this operation after

each service.

1

If you have carried out your vehicle's

service yourself, the zero reset

procedure is the following:

The point at which the next service is

due is calculated from the last service

indicator zero reset.

) switch off the ignition.

It is determined by two parameters:

) press the INFO button several times

in succession until the service indi-

cator is displayed.

) press and hold the INFO button for

a few seconds until the spanner

ﬂashes.

) press the INFO button while the

spanner is ﬂashing to change the

display "---" to "CLEAR" then the

time remaining before the next ser-

vice is due is displayed.

-

the distance travelled (in miles (km)),

the time elapsed since the last ser-

vice (in months).

The symbol "--" remains

displayed until the ﬁrst service of

a new vehicle has been carried

out.

The distance remaining to be travelled

may be weighted by the time factor,

depending on the user's driving habits.

Service overdue

Each time the ignition is switched on,

the display "PERIODIC INSPECTION"

is displayed for a few seconds to

indicate that the service must be carried

out without delay.

Operation

When the ignition is switched on, you

must press the INFO button several

times in succession until the service

indicator is displayed. The distance

recorder display line indicates the

number of miles (kilometres) remaining

and the time elapsed line indicates the

number of months remaining before the

next service is due.

Example: the display indicates that the

service is overdue. This service must

be carried out by a PEUGEOT dealer

or a qualiﬁed workshop.

After a certain distance and a

certain time, the display of "---" is

reinitialised and the display indicates

the time remaining before the next

service is due.

INSTRUMENTS and CONTROLS

TRIP COMPUTER

Average fuel

consumption

(l/100 km or km/l or

mpg)

Resetting the information to zero

Information display

1

This is the average fuel

consumption since the

last zero reset.

This ﬁgure may change following

a change in the style of driving or

the relief resulting in a change in

the current fuel consumption.

When the required information is

displayed, press the INFO button for

more than two seconds to reset all of

the information to zero.

Average speed

(km/h or mph)

With the ignition on, press the INFO

button on the dashboard, to the right

of the instrument panel, several times

in succession to display the different

information:

This is the average

speed calculated since

the last zero reset.

When the ignition is switched on, the

zero reset switches automatically from

manual mode to automatic mode.

-

average fuel consumption,

average speed,

current fuel consumption.

Automatic

If the ignition key remains in the

Current fuel

consumption

If dashes "---" are displayed

for long periods in place of the

digits while driving, contact a

PEUGEOT dealer or a qualiﬁed

workshop.

(l/100 km or km/l or OFF position for more than 4 hours,

the information is reset to zero

automatically.

mpg)

This is the average fuel

consumption

during

the last few seconds of

driving.

INSTRUMENTS and CONTROLS

MENU 2/3:

SETTING MENU

When the vehicle is moving,

the setting menu screen is not

displayed when you press the

INFO button.

-

a/b (option of displaying a different

language in the instrument panel

screen and the navigation screen),

System which provides access to the

settings of certain functions.

The various menus may differ for the

type 1 instrument panel and the type 2

instrument panel.

With the ignition on, press the INFO

button on the dashboard, to the right of

the instrument panel, several times in

succession until the "SETTING MENU"

screen is displayed.

1

-

activation/deactivation of the INFO

button sound,

ALARM (changing the "BREAK RE-

MINDER" display interval),

choice of the direction indicators

sound,

activation/deactivation of current

fuel consumption,

Operation

) press and hold the INFO button for

a few seconds to display the menu

screen.

When the vehicle is

stationary, it allows

the user to change the

following settings:

MENU 3/3:

RESET (restore factory settings).

-

- resetting average fuel

consumption and av-

erage speed,

-

the fuel consumption units,

the temperature display units,

the display language,

activation/deactivation of the INFO

button sound,

the break (rest) reminder display in-

terval,

restore factory settings.

Press and hold the INFO button

for a few seconds to return to

the previous screen.

When the menus screen is

displayed, if no operation is

carried out within 15 seconds,

the setting menu screen is

displayed.

) on the menu screen, press the INFO

button to select a function from the

list:

MENU 1/3:

-

1 - 2 (options for resetting aver-

age fuel consumption and average

speed),

-

UNIT (choice of the fuel consump-

tion units),

choice of the temperature display

units,

LANGUAGE (choice of display lan-

To change the settings, you

must stop the vehicle and switch

on the ignition.

guage),

Apply the parking brake and

place the gear lever in neutral.

INSTRUMENTS and CONTROLS

In this case, the distance, speed and

Options for resetting average

fuel consumption and average

speed

quantityoffuelunitswillalsobechanged

in accordance with your choice of fuel

consumption unit.

If the battery is disconnected,

the settings memory is cleared

and the default unit (km/L) is

restored automatically.

1

You can choose between two average

fuel consumption and average speed

resetting modes:

-

automatic reset (choice 1),

manual reset (choice 2).

On the menu screen:

) press the INFO button to select

"UNIT".

Choice of temperature display

units

You can choose between different units

for displaying the temperature.

On the menu screen:

) press the INFO button to select:

On the menu screen:

) press the INFO button to se-

lect the temperature unit set-

ting symbol (thermometer).

) press and hold the INFO button for

a few seconds to display the "UNIT"

screen.

) press and hold the INFO button for a

few seconds to switch in succession

from resetting mode 1 (automatic)

to resetting mode 2 (manual).

The mode selected is conﬁrmed.

) press and hold the INFO button for

a few seconds to alternate between

the units (°C and °F).

The mode selected is conﬁrmed.

) press the INFO button to scroll the

units (km/L, L/100 km, mpg(US),

mpg(UK) and RETURN) in succes-

sion.

Choice of fuel consumption

units

You can choose between different units

for displaying fuel consumption.

If the battery is disconnected, the

settings memory is cleared and

the default unit (°C) is restored

automatically.

) press and hold the INFO button for

a few seconds to conﬁrm your se-

lection.

INSTRUMENTS and CONTROLS

Choice of display language

(LANGUAGE)

You can choose between different

languages for the screen.

Changing the display interval

If the battery is disconnected, the

of the "BREAK REMINDER"

message

You can change the display interval of

settings memory is cleared and

the default language (ENGLISH)

is restored automatically.

1

the "BREAK REMINDER" message.

On the menus screen:

) press the INFO button to select

"LANGUAGE".

On the menu screen:

) press the INFO button to select

"ALARM" (located on menu 2/3).

Activation/deactivation of the

"INFO" button sound

You can activate or deactivate the INFO

button sound.

On the menus screen:

) press the INFO button to se-

lect the INFO button sound

activation/deactivation sym-

bol (located on menu 2/3).

)

press and hold the INFO button for a few

seconds to display the "LANGUAGE"

screen.

) press and hold the INFO button

for a few seconds to display the

"ALARM" screen.

) press the INFO button to scroll

through the languages (Japonais,

English, Deutsch, Français, Espa-

nol, Italiano, "---" and RETURN) in

succession.

) press and hold the INFO button for

a few seconds to conﬁrm your se-

lection.

) press and hold the INFO button for

a few seconds to alternate between

the choices (ON, OFF).

) press the INFO button to select the

display interval of the "BREAK RE-

MINDER" message.

) press and hold the INFO button for

a few seconds to conﬁrm.

The mode selected is conﬁrmed.

If the battery is disconnected,

the settings memory is cleared

and the default choice (ON) is

restored automatically.

If the battery is disconnected,

the settings memory is cleared

and the default value (OFF) is

restored automatically.

If you select the "---" setting, no

message will be displayed in

message display situations.

INSTRUMENTS and CONTROLS

The factory settings are:

) press the INFO button for a few

seconds to alternate between the

choices (ON, OFF).

Choice of the direction

indicators sound

You can choose the sound of the

direction indicators, on the type 2

instrument panel only.

1

Functions

Factory setting

On the menus screen:

) press the INFO button to select sound

1 or 2 (located on menu 2/3).

Resetting average

fuel consumption

and average

speed

Restoring factory settings

(RESET)

1 (automatic)

L/100 km

You can restore all of the factory settings

for all of the functions.

Fuel consumption

units

On the menu screen:

) press the INFO button to select

"RESET" (located on menu 2/2 or

3/3 depending on the instrument

panel).

Temperature

display unit

°C

Activation/deactivation of the

current fuel consumption

Display language

ENGLISH

ON (activated)

OFF (deactivated)

You can activate or deactivate the

current fuel consumption, on the type 2

instrument panel only.

INFO button

sound

On the menu screen:

) press the INFO button to select the

current fuel consumption activation/

deactivation symbol (located on

menu 2/3).

Display of

the "BREAK

REMINDER"

message

) press and hold the INFO button for

at least 5 seconds.

An audible signal is heard and all of the

factory settings are restored for all of

the functions.

INSTRUMENTS and CONTROLS

MONOCHROME SCREEN

Setting the time

Selecting the Setting

Select the automatic mode or the

manual mode as follows:

1

The digital clock can be set in automatic

mode or in manual mode.

This provides the following information:

-

the time,

audio system information (refer to

the "Audio and Telematics" section).

) Press button A "PWR" to switch on

the audio system.

Automatic mode

) Access the setting mode by press-

ing button B "TUNE" for approxi-

mately 2 seconds.

This mode permits automatic setting

of the local time using the signal from

RDS stations.

) Press button B "TUNE" several

times to scroll through the various

menus and select the CT menu

(clock time).

The symbol "CT" appears on the

screen.

Manual mode

This mode permits manual setting of

the time using the audio equipment

buttons.

It can also be used when the "Automatic

mode"displaysaninaccuratetime,when

the local RDS stations are broadcasting

from a different time zone.

The order of the menus is the

following: AF/CT/REG/TP-S/PTY

display language/SCV/PHONE/

Functions setting mode OFF.

INSTRUMENTS and CONTROLS

Manual mode

The digital clock does not display

seconds.

When the "minutes" display is

set or reset to zero, the clock

starts at the zero second of the

minute selected.

1

The time setting is lost if the

battery is disconnected.

) Turn button B "TUNE" to the left or

to the right to select "CT ON" (auto-

matic mode) or "CT OFF" (manual

mode).

) After selecting the mode, you can

exit the "Functions setting mode"

menu by pressing button B "TUNE"

for approximately 2 seconds.

Set the time using the buttons as

indicated below:

) with the ignition on or in the ACC

(Accessories) position, press and

hold the CLOCK button until the

time display ﬂashes.

) Press the appropriate button to set

the time:

Button H: to set the hours

The hours digits scroll when you press

this button.

Button M: to set the minutes

If no action is carried out within

10 seconds, the system will exit

the "Functions setting mode"

menu automatically.

The minutes digits scroll when you

press this button.

Button 00: to reset the minutes to

zero.

Automatic mode

-

from 1 to 29 min: rounded down to

the previous hour,

from 30 to 59 min: rounded up to

the next hour.

In this mode, setting is automatic using

the signal from the RDS radio stations.

) After setting the time, press the

DISP button; the time display stops

ﬂashing.

INSTRUMENTS and CONTROLS

"Settings" menu

"Navigation-guidance" menu

COLOUR SCREEN

1

This permits display of the following

main menus:

On the control panel, press button B On the control panel, press button C

(SET) to access the "Settings" screen (MENU) to access the "Menu" screen

and select:

"Audio-video" menu

-

"Display Off" to switch off the dis-

play,

"Sound control" for the sound dis-

tribution or volume, the type of music

and the sound ﬁeld (surround),

"Picture control" to set the colour,

the intensity, the brightness, the

contrast and the level of black,

"System" to change the time zone,

the language, the units and other

settings,

"Wide Screen" to change the size

of the DVD picture to 4/3 format,

wide screen mode, centred wide

screen mode or enlargement,

"Equipment" to set certain equip-

ment offered in the vehicle,

"Colour Contrast" to select the

contrast of the display in relation

to the ambient light (Day, Night or

Auto),

-

"Address/Junction" to search for

a location using the address or the

name of the street,

"POI name" to search for a location

using the name of a point of interest

(POI),

"Advanced search" to search for a

location using an advanced search

based on a POI,

"Previous 20" to search for a loca-

tion using one of the 20 previous

destinations,

"Address book" to search for a lo-

cation using a stored address,

"Home" to navigate to your home

address,

"Navigation settings" to set func-

tions linked with the navigation,

"Navigation tools" to access the

basic information or a pre-set demon-

stration.

-

On the control panel, press button A

(MODE) to access the "AV mode"

screen and select:

-

radio (FM, MW, LW),

CD (audio, MP3 or WMA),

Music Server,

-

DVD.

The "CD" and "DVD" buttons

are active if you insert a CD or

DVD in the player.

-

"TP standby" to activate or deacti-

vate the trafﬁc information.

INSTRUMENTS and CONTROLS

"Info" menu

"Route" menu

Setting the time

1

On the control panel, press button E

(NAVI) to access the "Route Menu"

screen and select:

On the control panel, press button D

(INFO) to access the "Info" screen and

consult:

The digital clock is set automatically.

This mode enables the system to set

the local time automatically using the

signal from the RDS stations.

-

"Detour" to make a detour through

a speciﬁed region,

"Itinerary" to change the route,

"View route" to display a route in

different ways,

-

"Support info" to display the soft-

ware and data versions,

"Vehicle position" to display the

GPS location of the vehicle,

"Calendar" to make a note of

events, birthdays, etc.,

"Journey" to display the average

speed, fuel consumption, distances

and driving time,

-

)

On the control panel, press button B

(SET) to access the "Settings" menu.

-

"Delete route" to delete a route,

"Nearby POI" to search for the

POIs in the surrounding area.

-

"Environment" to display the alti-

tude, the atmospheric pressure, the

exterior temperature (the ice symbol

is displayed if there is a risk of ice),

-

"Air conditioning" to display the

information relating to the air condi-

tioning,

"Mobile phone" to enter a number,

delete a character, make or receive

a call.

) On the touch screen, press button B

to access the "System" menu.

The system settings screen is

displayed.

INSTRUMENTS and CONTROLS

Once this menu has been selected, you

can access the following functions:

LIGHTING RHEOSTAT

System for manual adjustment of the

brightness of the instruments and

controls in relation to the exterior

brightness.

1

)

Press button C to access the "Time"

menu.

1. RDS Auto Correct:

Activate/deactivate automatic ad-

justment.

2. GMT/GMT+1/GMT+2

Select the time zone.

3. Summer Time:

Summer time On/Off.

) Press button D to conﬁrm and re-

turn to the previous menu.

With the lighting on or off, press the

button to change the intensity of the

lighting of the instruments and controls

in "day" or "night" mode.

An audible signal is heard and the

intensity of the lighting increases

each time the button is pressed.

You must deactivate automatic

adjustment (RDS Auto Correct)

to change the time zone and

summer time settings.

On each screen, you can return

to the previous screen by

pressing button D "Return".

When the lighting reaches the maximum

setting, press again to change to the

minimum setting.

When the lighting reaches the required

intensity, release the button.

The setting is saved when the ignition

switch is turned to OFF.

INSTRUMENTS and CONTROLS for Your Peugeot 4007 4 Door 2012-2017

Related Topics

Popular Owner Manuals

Latest Owner Manuals