INSTRUMENTS and CONTROLS
DISTANCE RECORDERS (A/B)
COOLANT TEMPERATURE
When the engine is
running, this indicates
the distance which can
still be travelled with the
fuel remaining in the tank
based on the average
fuel consumption over
the last few miles/
kilometres travelled.
System for measuring the total distance
travelled by the vehicle during its service
life and the distance travelled in a day
or other period until it is reset to zero by
the driver.
When the engine is
running, this indicates
the temperature of the
coolant.
1
The total distance is
displayed in zone 1 of
the screen and the trip
distance in zone 2.
If the bar is close to the critical position
located on the right, the temperature is
too high.
When the range is less than 30 miles
(50 km), dashes are displayed.
Refuel as soon as possible. The display
of the range is updated.
The symbol flashes when your engine
is overheating.
Zero reset
You must stop your vehicle as soon
as it is safe to do so.
Wait a few minutes before switching
off the engine.
With the ignition on, press the INFO
button for more than 2 seconds until
zeros appear.
This figure may increase
following a change in the style
of driving or the relief, resulting
in a reduction in the current fuel
consumption.
If you only add a few litres, the
value displayed will be incorrect.
Therefore, you must fill the tank
whenever possible.
Wait for the engine to cool before
topping up the level. The cooling
system is pressurised.
To avoid any risk of scalding,
unscrew the cap by two turns to
allow the pressure to drop.
When the pressure has dropped,
remove the cap and top up the
level, if necessary.
Whenyoudisconnectthebattery,
the previous fuel consumption
data is lost and the value
displayed will be different from
that displayed before the battery
was disconnected. The distance
displayed must be considered
an approximate indication.
Contact a PEUGEOT dealer or
a qualified workshop.
English 