Advertisement

Advertisement

VISIBILITY for Your Peugeot 4007 4 Door 2012-2017

VISIBILITY  
LIGHTING STALK  
Main lighting  
A. Main lighting mode selection ring:  
turn it to position the symbol re-  
quired facing the mark.  
Certain functions of the lighting  
stalk (automatic illumination of  
headlamps, sensitivity) can be  
congured via the colour screen  
"Equipment" menu.  
The various front and rear lamps of the  
vehicle are designed to adapt the driver's  
visibility progressively in relation to the cli-  
matic conditions:  
Lamps off.  
-
-
sidelamps, to be seen,  
dipped beam headlamps to see  
without dazzling other drivers,  
Automatic illumination of  
headlamps.  
-
main beam headlamps to see clearly  
when the road is clear.  
4
Sidelamps.  
Additional lighting  
Dipped headlamps or main  
beam headlamps.  
Other lamps are installed to full the re-  
quirements of particular driving conditions:  
B. Stalk for switching headlamps: pull  
the stalk towards you to switch the  
lighting between dipped and main  
beam headlamps.  
In the lamps off and sidelamps modes, the  
driver can switch on the main beam head-  
lamps temporarily ("headlamp ash") by  
maintaining a pull on the stalk.  
-
-
-
rear foglamps to be seen from a dis-  
tance,  
front foglamps for even better  
visibility,  
daytime running lamps to be seen  
during the day.  
Manual controls  
The lighting is controlled directly by the  
driver by means of the ring A and the  
stalk B.  
Displays  
Illumination of the corresponding indica-  
tor lamp in the instrument panel conrms  
that the lighting selected is on.  
 
VISIBILITY  
Front and rear foglamps  
front and rear foglamps  
In good or rainy weather, both  
day and night, the front foglamps  
and the rear foglamps are pro-  
hibited. In these situations, the  
power of their beams may dazzle  
other drivers.  
Do not forget to switch off the  
front foglamps and the rear fo-  
glamps when they are no longer  
necessary.  
) To switch on the front foglamps, turn  
the ring C forwards once.  
) To switch on the rear foglamps, turn  
the ring C forwards twice.  
) To switch off the rear foglamps, turn  
the ring C rearwards once.  
) To switch off the front foglamps, turn  
the ring C rearwards twice.  
The ring C returns to its initial position  
4
automatically.  
The front foglamps are switched on  
automatically when you switch on the  
rear foglamps.  
The rear foglamps are switched off  
automatically when you switch off the  
dipped/main beam headlamps or the  
front foglamps.  
On vehicles tted with daytime run-  
ning lamps, the rear foglamps can be  
switched on even if the lighting stalk is  
in the "OFF" position.  
Lighting on reminder  
C. foglamps selection ring.  
The foglamps operate with the dipped  
and main beam headlamps.  
An audible signal when the driver's  
door is opened warns the driver if  
the vehicle lighting is on, with the  
ignition off.  
Switching off the lighting stops  
the audible signal.  
If condensation is present, switch  
the headlamps on for a few minutes  
in order to clear it.  
 
VISIBILITY  
Daytime running lamps*  
Automatic illumination of headlamps  
Automatic switching off  
On vehicles which are equipped with daytime The sidelamps and the dipped beam When the lights stalk is at "dipped head-  
running lamps, the dipped beam headlamps headlamps come on automatically, with- lamps or main beam headlamps", if the  
come on when the vehicle is started.  
out any action on the part of the driver, ignition switch is at "LOCK" or "ACC" or  
if a low level of exterior light is detected if the key has been removed from the  
or if the wipers are switched on.  
ignition switch, the lights switch off au-  
tomatically when the driver's door is  
opened.  
This warning lamp comes on  
in the instrument panel.  
When the light returns to a sufcient  
level or the wipers are switched off, the  
lighting is switched off automatically.  
The sensor is located at the base of the  
windscreen.  
Contact a PEUGEOT dealer or a quali-  
ed workshop to adjust the sensitivity  
of the sensor.  
The instruments and controls (instrument  
panel, multifunction screen, air condition-  
ing control panel, ...) are illuminated.  
4
In foggy weather or in snow, the  
sunshine sensor may detect suf-  
cient light. The lighting will not  
come on automatically.  
Do not cover the sunshine sen-  
sor, the associated functions will  
no longer be controlled.  
The sensitivity of the automatic  
illumination of headlamps can be  
congured via the colour screen  
"Equipment" menu.  
* According to country.  
 
VISIBILITY  
MANUAL HEADLAMP  
ADJUSTMENT  
7-seat version  
AUTOMATIC HEADLAMP  
ADJUSTMENT  
0. Driver only or Driver + 1 passenger  
in the front.  
1 or 2. Driver + 1 passenger in the front  
+ 2 passengers on the third bench  
seat.  
3. 7 occupants (including the driver  
with or without maximum authorised  
load).  
4. Driver + maximum authorised load.  
4
To avoid dazzling other road users, the  
height of the headlamps must be adjust-  
ed in relation to the load in the vehicle.  
On vehicles with xenon bulbs: when  
stationary, the system automatically  
corrects the height of the beam, what-  
ever the load of the vehicle. The driver  
is then assured of having optimum light-  
ing and not causing a nuisance to other  
road users.  
5-seat version  
0. Driver only or Driver + 1 passenger  
in the front.  
1 or 2. 5 occupants (including the driver).  
3. 5 occupants (including the driver)  
+ maximum authorised load.  
4. Driver + maximum authorised load.  
In cases of malfunction,  
this message appears in  
the multifunction screen.  
Do not touch the xenon bulbs. Contact  
a PEUGEOT dealer or a qualied work-  
shop.  
 
VISIBILITY  
Manual controls  
WIPER CONTROLS  
Certain windscreen wiper func-  
tions (intermittent operation, ...)  
can be congured via the colour  
screen "Equipment" menu.  
The wiper commands are issued directly  
by the driver by means of the stalk A and  
the ring B.  
Programming  
An automatic control mode is also avail-  
able, the automatic rain sensitive wind-  
screen wipers.  
Windscreen wipers  
A. wiping speed selection stalk:  
Windscreen wash  
Model with intermittent wiping  
Pull the wiper stalk towards you. The  
windscreen wash then the wipers oper-  
ate for a set time.  
The headlamp wash is also activated if  
the dipped beam headlamps are on.  
single wipe.  
park.  
4
intermittent (the speed can be  
set manually),  
or  
Headlamp wash  
automatic rain sensitive wipers  
(the speed can be set manually).  
slow.  
fast.  
Model with AUTO wiping  
B. intermittent operation or rain sensor  
sensitivity adjustment ring.  
You can increase or decrease:  
the wiping frequency when the in-  
termittent mode is active,  
the sensitivity of the rain sensor  
when the automatic mode is active.  
- "+": high sensitivity.  
- "-": low sensitivity.  
Press the end of the lighting stalk to  
activate the headlamp wash, when the  
dipped beam headlamps are on.  
 
VISIBILITY  
Operating fault  
Rear wiper  
Automatic rain sensitive wipers  
Do not cover the rain sensor, linked  
with the sunshine sensor and located in  
the centre of the windscreen behind the  
rear view mirror.  
The windscreen wipers operate automat-  
ically, without any action on the part of  
the driver, if rain is detected (sensor be-  
hind the rear view mirror), adapting their  
speed to the intensity of the rainfall.  
Switch off the automatic rain  
sensitive wipers when using an  
automatic car wash.  
To protect the rubber of the wiper,  
it is advisable to deactivate the  
automatic mode when the vehicle  
is parked and when the ambient  
temperature is below 0 °C.  
4
B. rear wiper selection ring:  
Activation  
) Move the stalk A to the "AUTO" po-  
park.  
sition.  
A message appears on the multifunc-  
tion screen.  
In winter, it is advisable to wait  
until the windscreen is completely  
clear of ice before activating the  
automatic rain sensitive wipers.  
intermittent wipe.  
The wiper wipes twice then switches to  
intermittent mode with an interval of a  
few seconds.  
wipe with screen wash.  
Keep the ring in this position to operate  
the screen wash with several wipes of  
the wiper.  
Deactivation  
) Move the stalk A to the "OFF" posi-  
tion.  
A message appears on the multifunc-  
tion screen.  
The intermittence of the rear wiper  
can be congured via the colour  
screen "Equipment" menu.  
 
VISIBILITY  
COURTESY LAMPS  
Front courtesy lamp  
Position 1  
The courtesy lamp comes on when a  
door or the tailgate is opened.  
When the door or the tailgate is closed  
again, the lighting gradually dims for a  
few seconds before switching off.  
However, the courtesy lamp is switched  
off automatically in the following cases:  
-
When the doors and the tailgate  
are closed and the ignition switch is  
placed in the "ON" position.  
When the doors and the tailgate are  
closed and you lock the vehicle from  
inside or using the remote control.  
4
-
Map reading lamps  
There are two map reading lamps, one  
on each side of the courtesy lamp.  
Press the corresponding lamp lens A.  
Position 2  
The courtesy lamp is off, regardless of wheth-  
er the doors or tailgate are open or closed.  
The durations of lighting of the  
front courtesy lamps can be  
congured via the colour screen  
"Equipment" menu.  
 
VISIBILITY  
-
When the doors and the tailgate are  
closed and you lock the vehicle from  
inside or using the remote control.  
Rear courtesy lamp  
Courtesy lamps automatic  
switch off  
To prevent discharging of the battery,  
the courtesy lamps, map reading lamps  
and boot lamp switch off automatically  
after 30 minutes.  
The courtesy lamps are switched on  
again if the ignition switch is placed  
in the "ON" or "ACC" position, if you  
open then close a door or the tailgate or  
if you use the remote control.  
Position 3 "OFF"  
The courtesy lamp is permanently off.  
Boot lamp  
4
The duration of lighting of the rear  
courtesy lamps can be congured  
via the colour screen "Equipment"  
menu.  
Position 1 "ON"  
The courtesy lamp is permanently on.  
Position 2 ""  
The courtesy lamp comes on when a  
door or the tailgate is opened. When  
the door or the tailgate is closed again,  
the lighting gradually dims for a few  
seconds before switching off.  
However, the courtesy lamp is switched  
off immediately in the following cases:  
Position 1 "ON"  
The boot lamp is on, regardless of  
whether the tailgate is open or closed.  
-
When the doors and the tailgate  
are closed and the ignition switch is  
placed in the "ON" position.  
Position 2 ""  
The boot lamp comes on if the tailgate  
is opened and switches off when the  
tailgate is closed.  
Position 3 "OFF"  
The boot lamp is off, regardless of  
whether the tailgate is open or closed.