VISIBILITY
Manual controls
WIPER CONTROLS
Certain windscreen wiper func-
tions (intermittent operation, ...)
can be configured via the colour
screen "Equipment" menu.
The wiper commands are issued directly
by the driver by means of the stalk A and
the ring B.
Programming
An automatic control mode is also avail-
able, the automatic rain sensitive wind-
screen wipers.
Windscreen wipers
A. wiping speed selection stalk:
Windscreen wash
Model with intermittent wiping
Pull the wiper stalk towards you. The
windscreen wash then the wipers oper-
ate for a set time.
The headlamp wash is also activated if
the dipped beam headlamps are on.
single wipe.
park.
4
intermittent (the speed can be
set manually),
or
Headlamp wash
automatic rain sensitive wipers
(the speed can be set manually).
slow.
fast.
Model with AUTO wiping
B. intermittent operation or rain sensor
sensitivity adjustment ring.
You can increase or decrease:
● the wiping frequency when the in-
termittent mode is active,
● the sensitivity of the rain sensor
when the automatic mode is active.
- "+": high sensitivity.
- "-": low sensitivity.
Press the end of the lighting stalk to
activate the headlamp wash, when the
dipped beam headlamps are on.
English 