Advertisement

Advertisement

VISIBILITY -> Lighting stalk for Your Peugeot 4007 4 Door 2012-2017

VISIBILITY  
LIGHTING STALK  
Main lighting  
A. Main lighting mode selection ring:  
turn it to position the symbol re-  
quired facing the mark.  
Certain functions of the lighting  
stalk (automatic illumination of  
headlamps, sensitivity) can be  
congured via the colour screen  
"Equipment" menu.  
The various front and rear lamps of the  
vehicle are designed to adapt the driver's  
visibility progressively in relation to the cli-  
matic conditions:  
Lamps off.  
-
-
sidelamps, to be seen,  
dipped beam headlamps to see  
without dazzling other drivers,  
Automatic illumination of  
headlamps.  
-
main beam headlamps to see clearly  
when the road is clear.  
4
Sidelamps.  
Additional lighting  
Dipped headlamps or main  
beam headlamps.  
Other lamps are installed to full the re-  
quirements of particular driving conditions:  
B. Stalk for switching headlamps: pull  
the stalk towards you to switch the  
lighting between dipped and main  
beam headlamps.  
In the lamps off and sidelamps modes, the  
driver can switch on the main beam head-  
lamps temporarily ("headlamp ash") by  
maintaining a pull on the stalk.  
-
-
-
rear foglamps to be seen from a dis-  
tance,  
front foglamps for even better  
visibility,  
daytime running lamps to be seen  
during the day.  
Manual controls  
The lighting is controlled directly by the  
driver by means of the ring A and the  
stalk B.  
Displays  
Illumination of the corresponding indica-  
tor lamp in the instrument panel conrms  
that the lighting selected is on.  
 
VISIBILITY  
Front and rear foglamps  
front and rear foglamps  
In good or rainy weather, both  
day and night, the front foglamps  
and the rear foglamps are pro-  
hibited. In these situations, the  
power of their beams may dazzle  
other drivers.  
Do not forget to switch off the  
front foglamps and the rear fo-  
glamps when they are no longer  
necessary.  
) To switch on the front foglamps, turn  
the ring C forwards once.  
) To switch on the rear foglamps, turn  
the ring C forwards twice.  
) To switch off the rear foglamps, turn  
the ring C rearwards once.  
) To switch off the front foglamps, turn  
the ring C rearwards twice.  
The ring C returns to its initial position  
4
automatically.  
The front foglamps are switched on  
automatically when you switch on the  
rear foglamps.  
The rear foglamps are switched off  
automatically when you switch off the  
dipped/main beam headlamps or the  
front foglamps.  
On vehicles tted with daytime run-  
ning lamps, the rear foglamps can be  
switched on even if the lighting stalk is  
in the "OFF" position.  
Lighting on reminder  
C. foglamps selection ring.  
The foglamps operate with the dipped  
and main beam headlamps.  
An audible signal when the driver's  
door is opened warns the driver if  
the vehicle lighting is on, with the  
ignition off.  
Switching off the lighting stops  
the audible signal.  
If condensation is present, switch  
the headlamps on for a few minutes  
in order to clear it.