ACCESS
Deactivation
ALARM
Locking the vehicle with full
alarm system
Press the unlocking button on the
remote control.
The alarm system is deactivated: the in-
dicator lamp on the button switches off.
System which protects and provides a
deterrent against theft and break-ins.
It provides the following types of moni-
toring.
Locking the vehicle with
exterior perimeter monitoring
only
-
Exterior perimeter
The system checks for opening of the
vehicle.
The alarm is triggered if anyone tries
to open a door, the boot, the bonnet...
Deactivate the interior volumetric pro-
tection to avoid unwanted triggering of
the alarm in certain cases such as:
-
-
-
-
-
-
leaving a pet in the vehicle,
leaving a window partially open,
washing your vehicle,
changing a wheel,
having your vehicle towed,
transport by sea.
-
Interior volumetric
Activation
Thesystemchecksforanyvariationinthe
volume in the passenger compartment.
The alarm is triggered if anyone breaks
a window, enters the passenger com-
partment or moves inside the vehicle.
Switch off the ignition and get out
of the vehicle.
Press the locking button on the re-
mote control.
The monitoring system is active: the
indicator lamp on the button flashes
once per second.
After the locking button on the remote
control is pressed, the exterior perime-
ter monitoring is activated after a delay
of 5 seconds and the interior volumetric
after a delay of 45 seconds.
If an opening (door, boot...) is not
closed fully, the vehicle is not locked
but the exterior perimeter monitor-
ing will be activated after a delay of
45 seconds at the same time as the
interior volumetric monitoring.
Deactivation of the interior
volumetric monitoring
Self-protection function
Switch off the ignition.
The system checks for the
putting out of service of its
components.
Within ten seconds, press the but-
ton until the indicator lamp is lit
continuously.
Get out of the vehicle.
Press the locking button on the re-
mote control immediately.
The exterior perimeter monitoring alone
is activated: the indicator lamp on the
button flashes once per second.
The alarm is triggered if the battery, the
central control or the wires of the siren
are put out of service or damaged.
For all work on the alarm system, contact
a PEUGEOT dealer.
To be effective, this deactivation must
be carried out each time the ignition is
switched off.
65
English