ACCESS
Safety anti-pinch
In the event of contact du-
ring operation of the blind, you
must reverse its movement.
To do this, press the control
concerned.
PANORAMIC SUNROOF (407SW)
If the blind encounters an obstacle
during closing, it stops and partially
opens again.
You must reinitialise the safety anti-
pinch within a maximum of five sec-
onds after the blind has stopped:
When the driver operates the blind-
control, they must ensure that no one
is preventing the blind from closing
correctly.
The driver must ensure that the pas-
sengers use the blind correctly.
Pay attention to children during opera-
tion of the blind.
-
press part A of the control until the
blind is completely closed (closing
in stages of a few centimetres).
Notes:
Following reconnection of the battery,
in the event of a blind malfunction
while it is moving or immediately after
it has stopped, you must reinitialise
the safety anti-pinch:
Your vehicle is fitted with a tinted glass
panoramic sunroof which increases
the light and visibility in the passen-
ger compartment. Its electric blind im-
proves temperature conditions.
The blind is controlled electrically by
a dial with nine opening positions.
To close: turn the dial to the left (nine
possible settings).
-
-
-
place the control in the fully open
position (position "0"),
wait until the blind is in the fully
open position,
press section A of the control for at
least three seconds.
To open: return the dial to the initial
position "0".
In the event of unwanted opening of
the blind on closing, and immediately
after the blind has stopped:
-
move the control to the fully closed
position (9th setting to the left) then
press part A of the control straight
away,
-
continue to press the control until
the blind is fully closed.
The safety anti-pinch function is not
active during these operations.
71
English