Ease of use and comfort
To remove part A:
To refit it, proceed in the reverse order.
Storage well
► Note the direction of fitting.
► Unclip the rear mounting 1 on each side.
► Unclip the front mounting 2 on each side.
When sharp deceleration occurs, objects
placed on the load space cover can turn
into projectiles.
► Lift the rigid boot floor as far as possible
or lift the hinged boot carpet (depending on
version) to access the storage well.
This shelf can only be fitted in one direction.
To refit it, proceed in the reverse order.
Depending on version, it includes: – A hazard
warning triangle.
12 V accessory socket
Be sure to install the load space cover
correctly (as shown below) - Risk of
obstruction when closing the boot!
► A temporary puncture repair kit with the tool
kit.
► To connect a 12 V accessory (maximum
power: 120 W), lift the cover and plug in a
suitable adaptor.
► A spare wheel with the tool kit.
► Switch on the ignition.
► The traction battery charging cables
(Rechargeable hybrid).
The connection of an electrical device not
approved by PEUGEOT, such as a USB
charger, may adversely affect the operation of
vehicle electrical systems, causing faults such
as poor radio reception or interference with
displays in the screens.
Boot lamp
It comes on automatically when the boot is
opened and goes off automatically when the
boot is closed.
The lighting time varies according to the
circumstances:
► When the ignition is off, approximately 10
minutes.
► In energy saving mode, approximately 30
seconds.
► With the engine running, unlimited.
To remove part B:
► Unclip the two side mountings 3.
► Pull the load space cover forwards to extract
the two rear mountings 4 from the frame.
62
English 