Get Ease of use and comfort -> Front seats Guide for Peugeot 408 4 Door Second Generation (2022-2026)

Ease of use and comfort

Height

Never adjust the seats or steering wheel

when driving. Always keep your feet on

The head restraint is correctly adjusted

when its upper edge is level with the top

the floor.

of the head.

Removing a head restraint

Front seats

► Pull the head restraint fully up.

► Press lug A to release the head restraint and

raise it fully.

Before moving the seat backwards, ensure

that there is no person or object that might

prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats or of

jamming the seat if large objects are placed

on the floor behind the seat.

► Pull the control upwards to raise or push

it downwards to lower, until you obtain the

position required.

► Stow the head restraint securely.

Refitting a head restraint

Backrest angle

► Insert the head restraint rods into the guides

in the corresponding seat backrest.

► Push the head restraint fully down.

► Press the lug A to release the head restraint

and push it down.

Front head restraints

Adjusting the height

► Adjust the height of the head restraint.

Never drive with the head restraints

removed; they should be in place and

adjusted for the occupant of the seat.

► Turn the knob to obtain the desired angle.

Lumbar

Manual adjustments

Longitudinal

Upwards:

► Pull the head restraint up to the desired

position; you can feel the head restraint

clicking into position.

► Turn the knob to obtain the desired level of

lumbar support.

Downwards:

► Depending on equipment, press lug A or

button B and then, while still pressing, lower

the head restraint.

► Raise the control bar and slide the seat

forwards or backwards.

► Release the control bar to lock the seat in

position on one of the notches.

Ease of use and comfort

Seat cushion length

Backrest angle

This electric adjustment control is present on

"AGR" certified manually-adjustable seats.

► Tilt the control forwards or rearwards.

► Pull the handle forwards to release the

cushion, then move the front part of the

cushion forwards or backwards.

Lumbar

► Press and hold the front or rear of the button

to raise or lower the front part of the seat

cushion.

Electric adjustments

Longitudinal

Memorising driving

positions

Associated with the electrically-adjusted driver’s

seat, this function allows two driving positions

to be memorised, to make these adjustments

easier if there are frequent driver changes.

It records the electric adjustments made to the

seat.

The control allows independent adjustment of

the depth and vertical position of the lumbar

support.

► The control allows independent

adjustment of the depth and

vertical position of the lumbar

support.

► Push the control forwards or backwards to

slide the seat.

Cushion height and angle

► Press and hold the top or bottom of the

control to raise or lower the lumbar support

area.

Seat cushion angle.

Using buttons 1/2/M

► Enter the vehicle and switch the ignition on.

► Adjust the seat and the door mirrors.

► Press button M, then press button 1 or 2

within 4 seconds.

► Tilt the rear of the control upwards or

downwards to obtain the required height.

► Tilt the front of the control upwards or

downwards to obtain the required angle.

An audible signal confirms the memorisation.

Ease of use and comfort

Memorising a new position cancels the previous

position.

Up to 3 keys can be set up. Memorising a

new position with one key cancels the previous

position linked to this key.

With the ignition on or engine running

Heated and/or ventilated

seats

► Press button 1 or 2 to recall the

corresponding position.

The heating function is active only with

the engine running and when the outside

temperature is below 20°C.

Without i-Toggles

An audible signal sounds when adjustment is

complete.

You can interrupt the current movement by

pressing button M, 1 or 2 or by using one of the

seat adjustment controls.

Using the Smart Seat function

On/Off

A stored position cannot be recalled while

driving.

The recalling of stored positions is deactivated

45 seconds after switching off the ignition.

When unlocking the vehicle with the

electronic key To recall the corresponding

position using the Smart Seat function:

The function is previously activated.

► Enter the vehicle and switch the ignition on.

► Adjust the seat and the door mirrors.

► Press button M.

► Press the unlock button of the electronic key.

► Press the button corresponding to the seat.

► Within 5 seconds after pressing button M,

press unlock button of the electronic key

during at least 2 seconds.

► Each press changes the heating level; the

corresponding number of indicator lamps

come on.

► Press the driver's door handle with the

electronic key on you.

► To switch off the heating, press the button

until all of the indicator lamps are off.

An audible signal confirms the memorisation.

Up to 3 keys can be set up. Memorising a

new position with one key cancels the previous

position linked to this key.

► Approach the vehicle with the electronic key

on you.

The system status is memorised when the

ignition is switched off.

With i-Toggles

The driver's seat is moved when the driver's

door is opened.

In both cases An audible signal sounds when

adjustment is complete.

You can interrupt the current movement by

pressing button M, 1 or 2 or by using one of the

seat adjustment controls.

A stored position cannot be recalled while

driving.

Activation/Deactivation

The Smart Seat function is configured

in the Settings > Vehicle touch

screen application.

In the Seats touch screen application,

select the Seats tab.

► Then select Vehicle Access > Smart Seat.

► Press to activate/deactivate.

► Select the driver or passenger seat.

Recalling a stored position

The corresponding page is displayed with the

last memorised settings.

The recalling of stored positions is deactivated

45 seconds after switching off the ignition.

While the seat is moving, take care that

no person or object hinders the automatic

movement of the seat.

Ease of use and comfort

If the settings are suitable, press to

The function status is not memorised when the

ignition is switched off.

Changing settings

Prolonged use of heated seats is not

recommended for people with sensitive

skin.

There is a risk of burns for people whose

perception of heat is impaired (e.g. illness,

taking medication).

To keep the heated pad intact and to prevent

a short circuit: – Do not place heavy or sharp

objects on the seat.

activate/deactivate the function in the

Seats application.

If no action is taken, the display

returns to its initial state.

► In the Massage page, select the seat

concerned.

The function status is not memorised when the

ignition is switched off.

Changing settings

► Select a massage intensity from the three

preset levels: "1" (Low), "2" (Normal) or "3"

(High).

► Select another type of massage from those

offered.

► In the Seats page, select the seat concerned.

► Do not kneel or stand on the seat.

► Do not spill liquids onto the seat.

► Select an intensity from the three preset

levels: "1" (Low), "2" (Normal) or "3" (High).

The modifications are taken into account

immediately and memorised when the ignition is

switched off.

Once activated, the system starts a one hour

massage cycle, made up of sequences of 6

minutes of massage followed by 3 minutes at

rest.

The settings are memorised when the ignition is

switched off.

► Never use the heating function if the seat

is damp.

Do not use the function when the seat

is not occupied.

Reduce the heating intensity as soon as

possible.

When the seat and passenger compartment

have reached a satisfactory temperature,

switch the function off; reducing electrical

consumption in turn decreases energy

consumption.

Multipoint massage

The system stops automatically at the end of the

cycle.

System with a choice of type of massage and

adjustment of its intensity.

This system operates with the engine running,

as well as in STOP mode of the Stop & Start.

Activation/Deactivation

Steering wheel

adjustment

In the Seats touch screen application,

select the Massage tab.

► Select the driver or passenger seat.

The corresponding page is displayed with the

last memorised settings

If the settings are suitable, press to

activate/deactivate the function in the

Seats application.

► When stationary, pull the control to release

the steering wheel.

► Adjust the height and reach to suit your

driving position.

If the settings are suitable, press to activate/

deactivate the function in the Seats application.

If no action is taken, the display returns to its

initial state.

► Push the control to lock the steering wheel.

Ease of use and comfort -> Front seats for Your Peugeot 408 4 Door Second Generation (2022-2026)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals