Ease of use and comfort -> Mirrors for Your Peugeot 408 4 Door Second Generation (2022-2026)

Ease of use and comfort  
Press to activate/deactivate the  
function.The function is memorised  
each time the engine is switched off.  
Adjustment  
For safety reasons, these adjustments  
must only be carried out with the vehicle  
stationary.  
5
Mirrors  
PEUGEOT i-Cockpit®  
The instrument panel information is visible  
above the steering wheel, for greater safety  
and driving comfort.  
Adjust the steering wheel height so that it  
does not obstruct the instrument panel.  
Door mirrors  
Demisting/Defrosting  
The demisting/defrosting of the door  
mirrors works with the demisting/  
defrosting of the rear screen.  
Heated steering wheel  
For more information on Rear screen  
demisting/defrosting, refer to the  
corresponding section.  
In cold weather, this function heats the circular  
part of the steering wheel.  
It can be activated when the outside temperature  
is below 20°C.  
Without i-Toggles  
Move control A to the right or to the left to  
select the corresponding mirror.  
As a safety measure, the mirrors should  
be adjusted to reduce the "blind spots".  
The objects that you see in the mirrors are  
in fact closer than they appear. Take this  
into account in order to correctly judge the  
distance of vehicles approaching from behind.  
Move control B in any of the four directions to  
adjust.  
Return control A to its central position.  
Manual folding  
The mirrors can be folded manually (parking  
obstruction, narrow garage, etc.).  
Turn the mirror towards the vehicle.  
Electric folding  
Depending on equipment, the door mirrors can  
be folded electrically.  
With the engine running, press this button to  
activate/deactivate the function (confirmed by  
the indicator lamp coming on/going out).  
The system is automatically deactivated every  
time the engine is switched off.  
With i-Toggles  
In the Climate touch screen  
application, select the Seats and  
Steering Wheel tab.  
From the inside, with the ignition on, place  
control A in the central position.  
Pull control A backwards.  
Lock the vehicle from the outside.  
49  
Ease of use and comfort  
Electrochrome interior rear  
view mirror  
If the mirrors are folded using control A,  
they will not unfold when the vehicle is  
unlocked.  
Rear bench seat  
Rear head restraints  
Electric unfolding  
From outside: unlock the vehicle.  
From inside: with the ignition on, place  
control A in the central position and then pull  
it rearwards.  
The automatic folding/unfolding of the door  
mirrors is configured in the Settings >  
Vehicle touch screen application.  
Before using an automatic car wash, fold the  
mirrors.  
They have two positions:  
A high position, for when the seat is in use:  
Automatic tilting in reverse gear  
Pull the head restraint fully up.  
The electrochrome system uses a sensor that  
detects the level of exterior brightness and that  
coming from the rear of the vehicle, in order to  
automatically and gradually switch between day  
and night usage.  
Depending on version, this function allows you to  
automatically tilt the mirrors downwards to assist  
with parking manoeuvres in reverse gear.  
With the engine running, on engaging reverse  
gear, the mirror glasses tilt downwards.  
A low position, for stowing, when the seat is not  
in use:  
Press the lug A to release the head restraint  
and push it down.  
They each return to their original positions: – A  
few seconds after coming out of reverse gear.  
To ensure optimum visibility while  
manoeuvring, the mirror automatically  
brightens when reverse gear is engaged.  
The system is inoperative if the load in the  
boot exceeds the height of the load space  
cover or if the load space cover has items  
placed on it.  
The rear head restraints can be removed.  
Removing a head restraint  
Once the vehicle speed exceeds 6 mph (10  
km/h).  
Release the backrest using control 1.  
Tilt the backrest slightly forwards.  
Pull the head restraint fully up.  
When the engine is switched off.  
It can be activated/deactivated in  
the Settings > Vehicle touch screen  
application.  
Press the lug A to release the head restraint  
and remove it completely.  
The inclination of the mirrors is different  
between the two sides. It is more important  
on the passenger side to show more of the  
ground.  
50