2017-2023 Peugeot 5008 SUV Instruments User Manual

MY CAR USER MANUAL

Instruments for Your Peugeot 5008 SUV Second Generation (2017-2023)

Instruments  
B. Short press: start a manual test  
8. Trip distance recorder (miles or km)  
9. Total distance recorder (miles or km)  
Head-up digital display  
This digital instrument panel can be customised.  
Depending on the display mode selected, certain  
information is hidden or presented differently.  
Example with the "DIALS" display mode:  
1
Long press: reset the service indicator or trip  
distance recorder (depending on the context)  
A. Instrument panel ambient lighting on/off  
B. Short press: start a manual test  
Long press: reset the service indicator or trip  
distance recorder (depending on the context)  
Head-up digital display  
(Hybrid)  
This digital instrument panel can be customised.  
Depending on the display mode selected, certain  
information is hidden or presented differently.  
Example with the "ÉNERGIE" display mode:  
Displays  
Most warning and indicator lamps do not have a  
fixed position.  
The warning and indicator lamps in the second  
line are displayed from right to left in order of  
priority.  
1. Fuel gauge  
2. Analogue speedometer (mph or km/h)  
3. Gear shift indicator  
For certain functions that have indicator lamps  
for both operation and deactivation, there is only  
one dedicated location.  
Selector position and gear engaged on  
automatic gearbox  
4. Digital speedometer (mph or km/h)  
5. Cruise control or speed limiter settings  
Display of speed limit signs  
Permanent information  
1. Fuel gauge and remaining range (miles or  
km)  
2. Digital speedometer (mph or km/h)  
READY indicator lamp  
3. Selector position and gear engaged on  
automatic gearbox  
In the standard display, the instrument panel  
shows:  
– in fixed locations:  
• Information related to the gearbox and gear  
shift indicator.  
6. Rev counter (x 1,000 rpm)  
7. Engine coolant temperature indicator (°C)  
8. Trip distance recorder (miles or km)  
9. Total distance recorder (miles or km)  
• Fuel gauge.  
• Coolant temperature indicator (Petrol or  
Diesel).  
4. Energy flows  
5. Driving mode selected  
6. Power indicator  
A. Instruments and controls lighting dimmer*  
(available in night mode)  
or  
• Charge level and range indicator (Hybrid).  
• Distance recorders.  
7. Battery charge level and remaining range  
(miles or km)  
Instrument panel ambient lighting on/off**  
– in variable locations:  
* Versions with monochrome screen.  
** Versions with touch screen.  
9
Instruments  
• Digital speedometer.  
• Status or alert messages displayed  
temporarily.  
As a safety measure, these adjustments  
must be carried out with the vehicle  
stationary.  
various modes on the right-hand side of the  
instrument panel.  
► Press the thumbwheel to confirm the mode.  
The new display mode is applied immediately.  
Optional information  
Display mode overview  
Choosing a display colour  
Depending on the display mode selected and the  
active features, additional information may be  
displayed:  
– Rev counter (Petrol or Diesel).  
– Trip computer.  
– Driving aid functions.  
– Speed limiter or cruise control.  
– Media currently playing.  
– "DIALS": standard display of analogue and  
digital speedometers, distance recorders and:  
• fuel gauge, coolant temperature indicator  
and rev counter (Petrol or Diesel).  
• fuel gauge, battery charge indicator and  
power indicator (Hybrid).  
– NAVIGATION": specific display, showing  
the current navigation information (map and  
navigation instructions).  
– "DRIVING": specific display, showing the  
information relating to active driving aid systems.  
– "MINIMAL": minimal display with digital  
speedometer and distance recorders, and in  
the event of a warning only, the fuel gauge and  
engine coolant temperature indicator.  
– "ÉNERGIE": specific display showing a visual  
representation of the vehicle’s energy flows  
(Hybrid).  
(With PEUGEOT Connect Nav)  
The instrument panel display colour depends on  
the colour scheme chosen in this system.  
► Press Settings in the banner of the  
touch screen.  
► Select "Color schemes".  
► Select a display colour and then press  
"OK" to confirm.  
– Navigation instructions.  
– Engine information from the Dynamic Pack.  
– Power flow (Hybrid).  
Setting the display mode  
In each mode, specific types of information are  
displayed on the instrument panel.  
Customising the instrument  
panel  
You can modify the appearance of the instrument  
panel by choosing:  
– a display colour.  
– a display mode.  
Changing the display mode  
Display language and units  
These depend on the multifunction  
screen settings (configuration menu).  
When travelling abroad, the speed must be  
shown in the official units of the country you  
are driving in (mph, miles or km/h, km).  
– "PERSONAL": minimal display, with the ability  
to select and display optional information in the  
customisable areas on the left and right.  
Configuring a "PERSONAL" display mode  
With PEUGEOT Connect Radio  
► Press Settings in the banner of the  
touch screen.  
► Turn the thumbwheel on the left of the  
steering wheel to display and scroll through the  
► Select "Configuration".  
10  
Instruments  
► Select "Instrument panel  
personalisation".  
With PEUGEOT Connect Nav  
► Press Settings in the banner of the  
touch screen.  
malfunction (warning lamps) or of the operating  
status of a system (operation or deactivation  
indicator lamps). Certain lamps light up in two  
ways (fixed or flashing) and/or in several colours.  
(1): You must stop the vehicle.  
Stop as soon as it is safe to do so and switch off  
the ignition.  
(2): Contact a PEUGEOT dealer or a qualified  
workshop.  
(3): Visit a PEUGEOT dealer or a qualified  
workshop.  
1
Associated warnings  
► Select "OPTIONS".  
The illumination of a lamp may be accompanied  
by an audible signal and/or a message displayed  
in a screen.  
Relating the type of alert to the operating status  
of the vehicle allows you to determine whether  
the situation is normal or whether a fault has  
occurred: refer to the description of each lamp  
for further information.  
► Select "Instrument panel  
personalisation".  
► For each customised display area (left and  
right), select a type of information using the  
corresponding scroll arrows on the touch screen:  
• "Driving aids".  
• "Engine info" (Sport mode).  
• "G-metres" (Sport mode).  
• "Temperatures" (engine oil).  
• “Media".  
• “Navigation".  
• “Trip computer".  
• "Rev counter".  
• "Energy flow" (depending on version).  
• "Power indicator" (depending on version).  
• "Energy consumption" (depending on  
version).  
► Confirm to save and exit.  
The "PERSONAL" display mode is enabled  
immediately.  
List of warning and  
indicator lamps  
Red warning/indicator lamps  
STOP  
Fixed, associated with another warning  
lamp, accompanied by the display of a  
message and an audible signal.  
A serious fault with the engine, braking system,  
power steering, automatic gearbox or a major  
electrical fault has been detected.  
Carry out (1) and then (2).  
When the ignition is switched on  
Certain red or orange warning lamps come on  
for a few seconds when the ignition is switched  
on. These warning lamps should go off as soon  
as the engine is started.  
For more information on a system or a function,  
refer to the corresponding section.  
Maximum engine coolant temperature  
Fixed.  
The temperature of the cooling system is  
too high.  
Carry out (1), then wait until the engine has  
cooled down before topping up the level, if  
necessary. If the problem persists, carry out (2).  
Warning lamp continuously  
lit  
The illumination of a red or orange warning lamp  
indicates the occurrence of a fault that needs  
further investigation.  
Warning and indicator  
lamps  
Displayed as symbols, the warning and indicator  
lamps inform the driver of the occurrence of a  
Engine oil pressure  
Fixed.  
There is a fault with the engine lubrication  
system.  
If a warning lamp remains lit  
The references (1), (2) and (3) in the warning  
and indicator lamp description indicate whether  
you should contact a qualified professional in  
addition to the immediate recommended actions.  
Carry out (1) and then (2).  
11  
Instruments  
System malfunction (Hybrid)  
Fixed.  
The rechargeable hybrid system is faulty.  
Carry out (1) and then (2).  
an audible signal.  
A door or the tailgate is not properly closed  
(speed above 6 mph (10 km/h)).  
Orange warning/indicator lamps  
Service  
Temporarily on, accompanied by the  
display of a message.  
Seat belts not fastened/unfastened  
Fixed or flashing, accompanied by an  
increasing audible signal.  
A seat belt has not been fastened or has been  
unfastened.  
Cable connected (Hybrid)  
One or more minor faults, for which there is/are  
no specific warning lamp(s), have been detected.  
Identify the cause of the fault using the message  
displayed in the instrument panel.  
You can deal with certain problems yourself, for  
example an open door or the start of saturation  
of the particle filter.  
For other faults, such as with the tyre under-  
inflation detection system, carry out (3).  
Fixed, accompanied by the display of a  
message.  
One or more major faults, for which there is/are  
no specific warning lamp(s), have been detected.  
Identify the cause of the fault using the message  
displayed in the instrument panel, then carry out  
(3).  
Fixed.  
It is not possible to start the vehicle while  
the charging cable is connected to the vehicle’s  
connector.  
Disconnect the charging cable and close the  
flap.  
Electric parking brake  
Fixed.  
The electric parking brake is applied.  
Flashing.  
12 V battery charge  
Fixed.  
The electric parking brake is not applied  
automatically.  
Application/release is faulty.  
Carry out (1): park on flat ground (on a level  
surface).  
With a manual gearbox, engage a gear.  
With an automatic gearbox, select mode P.  
Switch off the ignition and carry out (2).  
The battery charging circuit has a fault  
(dirty terminals, slack or cut alternator belt, etc.).  
Carry out (1).  
If the electric parking brake is no longer working,  
immobilise the vehicle:  
► With a manual gearbox, engage a gear.  
► With an automatic gearbox, put the chocks  
against one of the wheels.  
Clean and retighten the terminals. If the warning  
lamp does not go off when the engine is started,  
carry out (2).  
Fixed, accompanied by the message  
"Parking brake fault".  
Automatic release of the electric parking brake is  
unavailable.  
Braking  
Fixed.  
The brake fluid level in the braking circuit  
has dropped significantly.  
Carry out (1), then top up with fluid that complies  
with the manufacturer's recommendations. If the  
problem persists, carry out (2).  
Fixed.  
The electronic brake force  
distribution (EBFD) system is faulty.  
Carry out (1) and then (2).  
Carry out (2).  
Door(s) open  
Service warning lamp fixed and  
service spanner flashing then  
Fixed, associated with a message  
identifying the access.  
A door or the tailgate is not properly closed  
(speed less than 6 mph (10 km/h)).  
Fixed, associated with a message  
identifying the access, accompanied by  
fixed.  
The servicing interval has been exceeded.  
The vehicle must be serviced as soon as  
possible.  
Only with BlueHDi Diesel engines.  
12  
Instruments  
Engine pre-heating (Diesel)  
Temporarily on  
(up to approximately 30 seconds in  
severe weather conditions).  
When switching on the ignition, if the weather  
conditions and the engine temperature make it  
necessary.  
Wait until the warning lamp goes off before  
starting.  
When the warning lamp goes off, starting will  
occur immediately if you press and hold:  
– the clutch pedal with a manual gearbox.  
– the brake pedal with an automatic gearbox.  
If the engine does not start, make the engine  
starting request again, while keeping your foot  
on the pedal.  
Engine self-diagnostics system  
Flashing.  
The engine management system has a  
fault.  
There is a risk that the catalytic converter will be  
destroyed.  
You must carry out (2).  
Fixed.  
The emissions control system has a fault.  
The warning lamp should go off when the engine  
is started.  
Carry out (3) without delay.  
AdBlue® (BlueHDi)  
On for around 30 seconds when starting  
the vehicle, accompanied by a message  
indicating the driving range.  
The driving range is between 1,500 and 500  
miles (2,400 and 800 km).  
Top up the AdBlue®.  
Fixed, on switching on the ignition,  
accompanied by an audible signal and a  
message indicating the driving range.  
The driving range is between 500 and 62 miles  
(800 and 100 km).  
Promptly top up the AdBlue®, or carry out (3).  
Flashing, accompanied by an audible  
signal and a message indicating the  
driving range.  
The driving range is less than 62 miles (100 km).  
You must top up the AdBlue® to avoid engine  
starting being prevented, or carry out (3).  
Flashing, accompanied by an audible  
signal and a message indicating that  
starting is prevented.  
1
The AdBlue® tank is empty: the regulatory engine  
immobiliser prevents the engine from being  
restarted.  
To restart the engine, top up the AdBlue®, or  
carry out (2).  
You must add at least 5 litres of AdBlue® to its  
tank.  
SCR emissions control system (BlueHDi)  
Fixed when the ignition is  
switched on, accompanied  
by an audible signal and a message.  
A malfunction involving the SCR emissions  
control system has been detected.  
This alert disappears once the exhaust  
emissions return to normal levels.  
Flashing AdBlue® warning  
Low fuel level  
Fixed, with the reserve level shown in red,  
accompanied by an audible signal and  
the display of a message.  
When it first comes on, there remains  
approximately 6 litres of fuel in the tank  
(reserve).  
Until the fuel level is topped up, this alert will be  
repeated every time the ignition is switched on,  
at increased frequency as the fuel level goes  
down and comes close to zero.  
Refuel without delay to avoid running out of fuel.  
Never drive until completely empty, as  
this could damage the emissions control and  
injection systems.  
lamp on switching on the  
ignition, with the Service and Engine self-  
diagnostics warning lamps on fixed,  
accompanied by an audible signal and a  
message indicating the driving range.  
Depending on the message displayed, it may be  
possible to drive for up to 685 miles (1,100 km)  
before the engine immobiliser is triggered.  
Carry out (3) without delay, to avoid starting  
being prevented.  
Flashing AdBlue® warning  
lamp on switching on the  
ignition, with the Service and Engine self-  
diagnostics warning lamps on fixed,  
accompanied by an audible signal and a  
13  
Instruments  
message indicating that starting is prevented.  
The engine immobiliser prevents the engine  
from restarting (over the authorised driving limit  
after confirmation of an emissions control system  
malfunction).  
If manual application and release commands are  
not working, the electric parking brake control  
lever is faulty.  
The automatic functions must be used at all  
times and are automatically re-enabled in the  
event of a control lever fault.  
Pedestrian horn (Hybrid)  
Fixed.  
Horn fault detected.  
Carry out (3).  
Distance Alert / Active Safety Brake  
Fixed, accompanied by the display of a  
message.  
The system has been deactivated via the vehicle  
configuration menu.  
To start the engine, carry out (2).  
Carry out (2).  
Deactivation of the automatic functions  
(with electric parking brake)  
Fixed.  
The "automatic application" (on switching  
off the engine) and "automatic release" (on  
acceleration) functions are deactivated.  
If automatic application/release is no longer  
possible:  
► Start the engine.  
► Use the control lever to apply the parking  
brake.  
► Take your foot fully off the brake pedal.  
► Hold the control lever pressed in the release  
direction for between 10 and 15 seconds.  
► Release the control lever.  
► Depress and hold the brake pedal.  
► Hold the control lever in the “Application”  
direction for 2 seconds.  
Fixed, accompanied by the  
message "Parking brake  
fault".  
Distance Alert/Active Safety Brake  
Flashing.  
The parking brake is faulty: manual and  
automatic functions may not be working.  
When stationary, to immobilise the vehicle:  
► Pull and hold the control lever for  
approximately 7 to 15 seconds, until the indicator  
lamp comes on on the instrument panel.  
If this procedure does not work, secure the  
vehicle:  
The system activates and brakes the  
vehicle momentarily so as to reduce the speed of  
collision with the vehicle ahead.  
Fixed, accompanied by a message and  
an audible signal.  
The system has a fault.  
Carry out (3).  
► Park on a level surface.  
Distance Alert / Active Safety Brake  
Fixed.  
The system has a fault.  
If these warning lamps come on after the engine  
is switched off and then restarted, carry out (3).  
► With a manual gearbox, engage a gear.  
► With an automatic gearbox, select P, then  
place the supplied chocks against one of the  
wheels.  
Then carry out (2).  
Anti-lock braking system (ABS)  
Fixed.  
► Release the control lever and the brake  
pedal.  
Braking  
Fixed.  
The anti-lock braking system has a fault.  
The vehicle retains conventional braking.  
Drive carefully at moderate speed, then carry  
out (3).  
A minor fault with the braking system has  
been detected.  
Drive carefully.  
Malfunction (with electric parking brake)  
Fixed, accompanied by the  
message "Parking brake fault".  
The vehicle cannot be immobilised with the  
engine running.  
Carry out (3).  
14  
Instruments  
Dynamic stability control (DSC)/Anti-slip  
regulation (ASR)  
Lane Departure Warning System  
Flashing, accompanied by an audible  
signal.  
A lane marking has been crossed on the left or  
right.  
Turn the steering wheel in the opposite direction  
to return to the correct trajectory.  
Fixed, accompanied by the display of a  
message.  
Airbags  
Fixed.  
One of the airbags or seat belt  
pretensioners is faulty.  
1
Fixed.  
The system is deactivated.  
The DSC/ASR system is reactivated  
automatically when the vehicle is restarted, and  
from around 31 mph (50 km/h).  
Below 31 mph (50 km/h), it can be reactivated  
manually.  
Carry out (3).  
Front passenger airbag (ON)  
Fixed.  
The front passenger airbag is activated.  
The control is in the "ON" position.  
In this case, do NOT install a "rearward  
facing" child seat on the front passenger seat  
- Risk of serious injury!  
Flashing.  
The system has a fault.  
Stay alert and drive carefully, then carry out (3).  
The DSC/ASR adjustment is activated if  
there is a loss of grip or trajectory.  
Fixed.  
The DSC/ASR system has a fault.  
Carry out (3).  
Active Lane Keeping Assistance  
Fixed.  
The system has been automatically  
deactivated or placed on standby.  
Flashing.  
You are about to cross a broken  
lane marking without operating the direction  
indicators.  
The system is activated, then corrects the  
trajectory on the side of the lane marking  
detected.  
Fixed, accompanied by the display  
of a message and an audible  
signal.  
The system has a fault.  
Carry out (3).  
Front passenger airbag (OFF)  
Fixed.  
The front passenger airbag is deactivated.  
The control is in the "OFF" position.  
A "rearward facing" child seat can be installed,  
unless there is a fault with the airbags (Airbags  
warning lamp on).  
Emergency brake malfunction (with  
electric parking brake)  
Fixed, accompanied by the  
message "Parking brake fault".  
Emergency braking does not deliver optimal  
performance.  
If automatic release is not available, use manual  
release or carry out (3).  
Under-inflation  
Fixed.  
The pressure in one or more tyres is too  
low.  
Check the pressure of the tyres as soon as  
possible.  
Reinitialise the detection system after adjusting  
the pressure.  
Hill start assist  
Fixed, accompanied by the  
message "Anti roll-back system  
fault".  
The system has a fault.  
Carry out (3).  
Lane positioning assist  
Fixed, accompanied by the  
Service warning lamp.  
The system has a fault.  
Carry out (3).  
Under-inflation warning lamp  
flashing then fixed and Service  
warning lamp fixed.  
The tyre pressure monitoring system is faulty.  
Under-inflation detection is no longer monitored.  
15  
Instruments  
Check the tyre pressures as soon as possible  
and carry out (3).  
Fixed.  
Automatic wiping  
The function has been activated, but the  
conditions for regulation are not met (gradient,  
gear engaged).  
Fixed.  
Automatic windscreen wiping is activated.  
Direction indicators  
Flashing with audible signal.  
The direction indicators are on.  
Front foglamps  
Stop & Start  
Fixed, accompanied by the display of a  
message.  
The Stop & Start system has been deactivated  
manually.  
The engine will not switch off at the next traffic  
stop.  
Flashing.  
The function is regulating the speed of  
the vehicle.  
The vehicle is being braked; the brake lamps  
come on during the descent.  
Fixed.  
The front foglamps are on.  
Fixed.  
Stop & Start  
Sidelamps  
The Stop & Start system has been  
deactivated automatically.  
The engine will not switch off at the next traffic  
stop, if the exterior temperature is:  
– below 0°C.  
Fixed.  
Fixed.  
The lamps are on.  
When the vehicle stops, the Stop & Start  
puts the engine into STOP mode.  
Flashing temporarily.  
STOP mode is momentarily unavailable  
or START mode is automatically triggered.  
Dipped beam headlamps  
Fixed.  
The lamps are on.  
– above +35°C.  
Flashing then fixed, accompanied by a  
message.  
The system has a fault.  
Carry out (3).  
Automatic headlamp dipping  
Vehicle ready to drive (Hybrid)  
Fixed, accompanied by an audible signal  
when it comes on.  
Fixed.  
The function has been activated  
via the touch screen (Driving / Vehicle menu).  
The lighting control stalk is in the "AUTO"  
position.  
The vehicle is ready to drive.  
Rear foglamps  
Fixed.  
The indicator lamp goes out upon reaching a  
speed of approximately 3 mph (5 km/h) and  
lights up again when the vehicle stops moving.  
The lamp will go out when you turn off the  
engine and exit the vehicle.  
The lamps are on.  
Blue warning/indicator lamps  
Green warning/indicator lamps  
Main beam headlamps  
Fixed.  
Hill Assist Descent Control  
Fixed.  
Active Lane Keeping Assist  
Fixed.  
The function has been activated.  
All the conditions have been met: the system is  
operating.  
The lamps are on.  
(grey)  
Black/white warning lamps  
The function has been activated, but is currently  
paused because the speed is too high.  
Reduce the vehicle speed to below 19 mph  
(30 km/h).  
Automatic gearbox or Electric automatic  
gearbox (e-EAT8) (Hybrid)  
Fixed.  
The automatic gearbox is locked.  
16  
Instruments  
► Switch on the ignition; a temporary display  
window appears and a countdown begins.  
► When the display indicates =0, release the  
button; the spanner disappears.  
You must press the Unlock button to unlock it.  
Service spanner  
On temporarily when the ignition is  
1
eSave function (Hybrid)  
Fixed, accompanied by the reserved  
electric range.  
switched on.  
Between 620 and 1,860 miles (1,000 and 3,000  
km) remain before the next service is due.  
Fixed, when the ignition is switched on.  
The next service is due in less than 620  
miles (1,000 km).  
The eSave function is activated.  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least 5 minutes for the reset to be  
registered.  
Indicators  
Have your vehicle serviced very soon.  
Service indicator  
The servicing information is expressed in terms  
of distance (kilometres or miles) and time  
(months or days).  
The alert is given at whichever of these two  
terms is reached first.  
The servicing information is displayed in the  
instrument panel. Depending on the version of  
the vehicle:  
Service spanner flashing  
Reminder of the servicing information  
You can access the servicing information at any  
time.  
Flashing then fixed, when the  
ignition is switched on.  
(With BlueHDi Diesel engines, combined with the  
Service warning lamp.)  
The servicing interval has been exceeded.  
Have your vehicle serviced as soon as possible.  
► Press the trip distance recorder reset button.  
The servicing information is displayed for a few  
seconds, then disappears.  
Resetting the service indicator  
– The distance recorder display line indicates  
the distance remaining before the next service  
is due, or the distance travelled since it was due  
preceded by the "-" sign.  
– An alert message indicates the distance  
remaining, as well as the period before the next  
service is due or how long it is overdue.  
The service indicator must be reset after each  
service.  
If you have serviced your vehicle yourself:  
► Switch off the ignition.  
Engine oil level indicator  
(Depending on version.)  
On versions fitted with an electric gauge, the  
engine oil level status is displayed on the  
instrument panel for a few seconds when  
the ignition is switched on, after the servicing  
information, in the form of messages.  
The value indicated is calculated  
according to the distance covered and  
the time elapsed since the last service.  
The alert may also be triggered close to a  
due date.  
The level read will only be correct if the  
vehicle is on level ground and the engine  
has been off for more than 30 minutes.  
► Press and hold the button located on the end  
of the wiper control stalk.  
17  
Instruments  
Engine coolant temperature AdBlue® range indicators  
Oil level incorrect  
This is indicated by the message "Oil  
level incorrect" on the instrument panel,  
accompanied by the lighting of the Service  
warning lamp and an audible signal.  
If the low oil level is confirmed by a check using  
the dipstick, the level must be topped up to avoid  
damage to the engine.  
indicator  
(BlueHDi)  
The Diesel BlueHDi engines are equipped with  
a system that associates the SCR (Selective  
Catalytic Reduction) emissions control system  
and the Diesel particle filter (DPF) for the  
treatment of exhaust gases. They cannot  
function without AdBlue®fluid.  
For more information on Checking levels, refer  
to the corresponding section.  
When the level of AdBlue® falls below the  
reserve level (between 1,500 miles and 0 miles  
(2,400 and 0 km)), a warning lamp lights up  
when the ignition is switched on and an estimate  
of the distance that can be travelled before  
engine starting is prevented is displayed in the  
instrument panel.  
Gauge fault  
This is indicated by the message "Oil level  
measurement invalid" on the instrument panel.  
Contact a PEUGEOT dealer or a qualified  
workshop.  
With the engine running:  
– In zone A, the temperature is correct.  
– In zone B, the temperature is too high; the  
associated warning lamp and the central STOP  
warning lamp come on in red on the instrument  
panel, accompanied by the display of a message  
and an audible signal.  
You must stop the vehicle as soon as it is  
safe to do so.  
Wait a few minutes before switching off the  
engine.  
The engine starting prevention system  
required by regulations is activated  
automatically once the AdBlue® tank is empty.  
It is then no longer possible to start the  
engine until the minimum level of AdBlue® has  
been topped up.  
In the event of a fault with the electric  
gauge, the oil level is no longer  
monitored.  
If the system is faulty, you must check the  
engine oil level using the manual dipstick  
located under the bonnet.  
For more information on Checking levels,  
refer to the corresponding section.  
Manually displaying the driving range  
While the driving range is greater than  
1,500 miles (2,400 km), it is not displayed  
automatically.  
After switching off the ignition, carefully  
open the bonnet and check the coolant  
level.  
For more information on Checking  
levels, refer to the corresponding  
section.  
► Press this button to temporarily display the  
driving range.  
18  
Instruments  
If the fault is temporary, the alert  
disappears during the next journey, after  
self-diagnostic checks of the SCR emissions  
control system.  
Actions required related to a lack of  
AdBlue®  
The following warning lamps light up when the  
quantity of AdBlue® is lower than the reserve  
level corresponding to a range of 1,500 miles  
(2,400 km).  
Together with the warning lamps, messages  
regularly remind you of the need to top up to  
avoid engine starting being prevented. Refer to  
the Warning and indicator lamps section for  
details of the messages displayed.  
Warning/  
indicator  
lamps lit  
Action  
Remaining  
range  
1
A top-up is  
vital, there is  
the risk that  
the engine will km and 0  
be prevented  
from starting.  
Between 62  
miles and 0  
miles (100  
Malfunction confirmed during the  
permitted driving phase (between 685  
miles and 0 miles (1,100 km and 0 km))  
km)  
If the fault indication is still displayed  
permanently after 31 miles (50 km) of driving, the  
fault in the SCR system is confirmed.  
The AdBlue warning lamp flashes, and an  
"Emissions fault: Starting prevented in X miles  
(km)” message is displayed, indicating the  
driving range in miles or kilometres.  
While driving, the message is displayed every 30  
seconds. The alert is repeated when switching  
on the ignition.  
To be able  
0 miles (km)  
to restart the  
engine, add at  
least 5 litres of  
AdBlue® to the  
tank.  
For more information on AdBlue®  
(BlueHDi engines), and in particular on  
topping up, refer to the corresponding section.  
Warning/  
indicator  
lamps lit  
Action  
Remaining  
range  
Malfunction of the SCR emissions  
control system  
You can continue driving for up to 685 miles  
(1,100 km) before the engine starting  
prevention system is triggered.  
Malfunction detection  
Top up.  
Between  
1,500 miles  
and 500  
Have the system checked by a  
PEUGEOT dealer or a qualified  
workshop as soon as possible.  
If a malfunction is detected,  
these warning lamps come  
on, accompanied by an  
audible signal and an  
miles (2,400  
km and 800  
km)  
Starting prevented  
"Emissions fault” message.  
Top up as  
soon as  
possible.  
Between  
500 miles  
and 62  
miles (800  
km and  
Whenever the ignition is switched on, the  
“Emissions fault: Starting prevented” message is  
displayed.  
The alert is triggered while driving, when the  
fault is detected for the first time, and thereafter  
when switching on the ignition for subsequent  
journeys, while the cause of the fault persists.  
100 km)  
19  
Instruments  
To be able to restart the engine, contact  
a PEUGEOT dealer or a qualified  
workshop.  
are permanently displayed when the vehicle is  
switched on.  
ECO  
Optimal use of energy (internal  
combustion or electric).  
The cursor is located in this zone  
during electric driving phases and  
during optimal usage phases of the  
petrol engine, accessible with suitable  
driving.  
An indicator indicates the restart  
threshold of the petrol engine. The  
driver can therefore moderate their  
acceleration to remain in electric  
driving mode.  
With the ignition off, opening the driver's  
door activates the indicator.  
Power indicator (Hybrid)  
The power indicator makes it possible to know in  
real time the power requested from the vehicle.  
There are 3 zones:  
Manual test in the  
instrument panel  
This function allows you, at any time, to check  
certain indicators and to display the alerts log.  
CHARGE Energy recovery for recharging the  
traction battery.  
► With the engine running, briefly press this  
button.  
The following information is displayed on the  
instrument panel:  
The cursor is located in this zone  
during deceleration phases: taking  
your foot off the accelerator pedal or  
braking.  
– Engine oil level.  
– Next service due.  
Charge level indicator  
(Hybrid)  
– Driving range associated with the AdBlue and  
the SCR system (BlueHDi Diesel).  
– Active alerts.  
POWER High power demand, using the  
combined capabilities of the petrol  
engine and the electric motor(s)  
(depending on version).  
This information is also displayed  
automatically every time the ignition is  
switched on.  
The cursor is located in this zone  
during more dynamic driving phases  
when high levels of performance are  
being requested.  
Distance recorders  
With the ignition on, the distances are  
permanently indicated. They are deactivated  
about 30 seconds after switching the ignition  
The charge level of the traction battery and  
the remaining range in electric driving mode  
20  
Instruments  
► Release the button when the desired  
off. They are displayed when the driver's door  
is opened, and when the vehicle is locked or  
unlocked.  
► With the ignition on, press the button until  
zeros appear.  
1
brightness is reached.  
Version with touch screen  
Allows the instrument panel lighting to be  
switched on or off.  
It only works when the vehicle lighting is on  
(“night” mode).  
When travelling abroad, you may have to  
change the distance units (km or miles):  
the road speed must be displayed in the local  
country’s official unit (km/h or mph).  
The unit is changed via the screen  
configuration menu, with the vehicle  
stationary.  
Instrument panel lighting  
dimmer  
Version with monochrome  
screen  
Allows the brightness of the instruments and  
controls and of the instrument panel to be  
adjusted.  
► Press this button.  
The brightness of the instrument panel lighting is  
adjusted using the touch screen.  
Total distance recorder  
This recorder measures the total distance  
travelled by the vehicle since its initial  
registration.  
It only works when the vehicle lighting is on  
(“night” mode).  
With PEUGEOT Connect Radio  
► Press this button to select the  
Settings menu.  
► Select "Brightness".  
Trip distance recorder  
This recorder measures the distance travelled  
since it was last reset by the driver.  
► Adjust the brightness by pressing the  
arrows or moving the slider.  
The settings are applied immediately.  
► Press outside the settings window to exit.  
You can also switch off the screen:  
► Press this button to select the  
Settings menu.  
► Select "Dark".  
► Press this button to adjust the  
brightness.  
► When the lighting reaches the minimum/  
maximum setting, release the button, then press  
it again to increase/decrease brightness.  
The screen goes off completely.  
► Press the screen again (anywhere on its  
surface) to activate it.  
Resetting the trip recorder  
21  
Instruments  
WithPEUGEOT Connect Nav  
In all other display modes, pressing the end of  
the wiper control stalk causes this data to appear  
temporarily in a specific window.  
Definitions  
► Press this button to select the  
Settings menu.  
► Select "OPTIONS".  
Range  
(miles or km)  
Display of the different tabs  
► Select "Screen configuration".  
The distance which can still be travelled  
with the fuel remaining in the tank  
(depending on the average fuel consumption  
over the last few miles (kilometres) travelled).  
This value may vary following a change in  
the style of driving or the terrain, resulting  
in a significant change in the current fuel  
consumption.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the range  
is recalculated and is displayed if it exceeds 62  
miles (100 km).  
► Select the "Brightness" tab.  
► Adjust the brightness by pressing the  
arrows or moving the slider.  
► Press this button to save and exit.  
You can also switch off the screen:  
► Press this button to select the  
Settings menu.  
► Press this button located on the end of the  
wiper control stalk to display the different tabs  
in turn:  
► Select "Turn off screen".  
– Current information:  
The screen goes off completely.  
► Press the screen again (anywhere on its  
surface) to activate it.  
• Total range (petrol or Diesel).  
• Total range (petrol or Diesel).  
• Stop & Start time counter (petrol or Diesel).  
• Percentage of the current journey travelled in  
all-electric driving mode (Hybrid).  
– Trips "1" then "2":  
• Average speed.  
• Average fuel consumption.  
• Distance travelled.  
If dashes instead of figures continue to be  
displayed when driving, contact a PEUGEOT  
dealer or a qualified workshop.  
Trip computer  
Displays information related to the current trip  
(range, fuel consumption, average speed, etc.).  
Current fuel consumption  
(mpg or l/100 km or km/l)  
Calculated during the last few seconds.  
Display of data in the  
instrument panel  
Trip computer data is displayed permanently  
when the "TRIP COMPUTER" or "PERSONAL"  
display mode is selected, depending on version.  
This function is only displayed from 19 mph  
(30 km/h).  
Trip reset  
► When the desired trip is displayed,  
press the button on the end of the wiper  
control stalk for more than 2 seconds.  
Trips "1" and "2" are independent and are used  
identically.  
Average fuel consumption  
(mpg or l/100 km or km/l)  
Calculated since the last trip computer  
reset.  
22  
Instruments  
On the audio system control panel, use the  
Average speed  
(mph or km/h)  
Monochrome screen C  
1
following buttons:  
MENU Access the main menu  
Calculated since the last trip computer  
reset.  
Displays  
Scroll through the items on the screen  
5 or 6  
7 or 8  
OK  
Change a setting value  
Validate  
Distance travelled  
Back  
Abandon the current operation  
(miles or km)  
Calculated since the last trip computer  
reset.  
Main menu  
Stop & Start time counter  
(minutes/seconds or hours/minutes)  
If your vehicle is equipped with Stop & Start, a  
time counter calculates the time spent in STOP  
mode during a journey.  
It resets to zero every time the ignition is  
switched on.  
Depending on the context, the following are  
displayed:  
– Time.  
►ꢀ Pressꢀtheꢀ“MENU" ” button:  
• "Multimedia".  
• "Telephone".  
– Date.  
• "Connections".  
–ꢀ Outsideꢀtemperatureꢀ(itꢀflashesꢀifꢀthereꢀisꢀaꢀriskꢀ  
of ice).  
•ꢀ "Personalisation-configuration".  
►ꢀ Pressꢀtheꢀ“7" or "8" button to select the  
menuꢀrequired,ꢀthenꢀconfirmꢀbyꢀpressingꢀtheꢀ  
"OK" button.  
– Visual parking sensors information.  
– Current audio source playing.  
– Telephone or hands-free kit information.  
– Settings menus for the display and the vehicle  
equipment.  
"Multimedia" menu  
With the audio system switched on, this  
menu allows you to activate or deactivate  
the functions associated with use of the radio  
(Frequency search (RDS), DAB / FM auto  
tracking, Radio Text (TXT) display) or to choose  
the media play mode (Normal, Random,  
Random all, Repeat).  
Controls  
23  
Instruments  
For more information on the "Multimedia"  
application, refer to the "Audio equipment and  
telematics" section.  
Defining the vehicle parameters  
Display configuration  
This menu gives access to the following settings:  
– "Choice of units",  
– "Date and time adjustment",  
– "Display parameters",  
This menu allows the activation or deactivation  
of the following equipment, depending on  
version:  
"Telephone" menu  
– "Access to the vehicle":  
With the audio system switched on, this  
menu allows you to make a call, view the  
calls log or the various telephone directories.  
For more information on the "Telephone"  
application, refer to the "Audio equipment and  
telematics" section.  
• "Plip action".  
– "Brightness".  
Adjusting the date and time  
For more information on the Remote control,  
and in particular the selective unlocking of the  
driver's door, refer to the "Access" section.  
– "Comfort":  
•ꢀ “Rearꢀwipeꢀinꢀreverseꢀgear".  
•ꢀ “Parkingꢀassistance".  
►ꢀ Pressꢀtheꢀ"7" or "8" button to display the  
"Displayꢀconfiguration"ꢀmenu,ꢀthenꢀpressꢀOK.  
►ꢀ Pressꢀtheꢀ"5" or "6" button to select the  
"Date and time adjustment" button, then press  
OK.  
"Connections" menu  
• "Fatigue Detection System".  
For more information on the Wiper control  
stalk,ꢀreferꢀtoꢀtheꢀ“Lightingꢀandꢀvisibility”ꢀsection.  
For more information on the Parking sensors  
or the Fatigue detection system, refer to the  
“Driving”ꢀsection.  
►ꢀ Pressꢀtheꢀ"7" or "8" button to select the  
settingꢀtoꢀmodify.ꢀConfirmꢀbyꢀpressingꢀOK, then  
modifyꢀtheꢀsettingꢀandꢀconfirmꢀagainꢀtoꢀsaveꢀtheꢀ  
modification.  
►ꢀ Adjustꢀtheꢀsettingsꢀoneꢀbyꢀone,ꢀconfirmingꢀ  
with the OK button.  
With the audio system on, this menu  
allows a Bluetooth device (telephone,  
media player) to be paired and the connection  
modeꢀtoꢀbeꢀdefinedꢀ(hands-free,ꢀplayingꢀaudioꢀ  
files).  
For more information on the "Connections"  
application, refer to the "Audio equipment and  
telematics" section.  
– "Driving assistance":  
• "Auto. emergency braking" (Active Safety  
Brake).  
►ꢀ Pressꢀtheꢀ"5" or "6" button, then the OK  
button to select the OKꢀboxꢀandꢀconfirmꢀorꢀtheꢀ  
Back button to cancel.  
• "Speed recommendation" (Road signs  
recognition).  
•ꢀ "Tyreꢀinflation"ꢀ(Tyreꢀunder-inflationꢀ  
detection).  
For more information on the Active Safety  
Brake, the Road signs recognition or the Tyre  
under-inflation detection,ꢀreferꢀtoꢀtheꢀ“Driving”ꢀ  
section.  
As a safety measure, the driver must only  
carry out operations that require  
sustained attention when stationary.  
"Personalisation-  
configuration" menu  
This menu gives access to the following  
functions:  
–ꢀ "Defineꢀtheꢀvehicleꢀparameters",  
– "Choice of language",  
–ꢀ "Displayꢀconfiguration".  
Touch screen  
This system gives access to the following  
elements:  
– Permanent display of the time and the exterior  
temperature (a blue warning lamp appears if  
there is a risk of ice).  
Choice of language  
This menu allows selection of the language used  
by the screen and the instrument panel.  
24  
Instruments  
– Vehicle functions and equipment setting  
menus.  
Principles  
Menus  
1
► Use the buttons arranged below the touch  
screen for access to the menus, then press the  
virtual buttons on the touch screen.  
Some menus may display across two pages:  
press the "OPTIONS" button to access the  
second page.  
– Audio system and telephone controls and  
display of related information.  
– Display of visual manoeuvring aid functions  
(visual parking sensor information, Park Assist,  
etc.).  
– Internet services and display of related  
information.  
– Navigation system controls and  
display of related information (depending on  
version).  
After a few moments with no action on  
the second page, the first page is  
displayed automatically.  
To deactivate/activate a function, select "OFF"  
or "ON".  
For safety reasons, always stop the  
vehicle before performing operations  
that require sustained attention.  
Some functions are not accessible while  
driving.  
Press with three fingers on the touch  
screen to show all menu buttons.  
Settings for a function  
Access to additional information on the  
function  
Confirm  
Radio / Media  
See "Audio equipment and telematics"  
section..  
Climate  
Recommendations  
Return to the previous page or confirm  
Settings for temperature, air flow, etc.  
For more information on Semi-automatic  
mono-zone air conditioning and Automatic  
dual-zone air conditioning, refer to the  
corresponding sections.  
This screen is of the capacitive type.  
Do not use pointed objects on the touch screen.  
Do not touch the touch screen with wet hands.  
Use a soft, clean cloth to clean the touch screen.  
Connected Navigation*  
See "Audio equipment and telematics"  
section.  
Driving or Vehicle**  
* The TomTom Traffic logo displayed on the map confirms the availability of connected navigation services. For more information, refer to the connected  
navigation section.  
** Depending on equipment.  
25  
Instruments  
Activation, deactivation and settings for certain  
functions.  
The functions are organised in 2 tabs : "Driving  
functions" and "Vehicle settings".  
Telephone  
– Green bar chart: energy recovered during  
deceleration and braking, used to recharge the  
battery.  
2. Average fuel consumption for the current trip  
(kWh/100 km) and historical values (orange bar  
chart).  
See "Audio equipment and telematics"  
section..  
► You can change the displayed time scale by  
pressing the - or + buttons.  
Applications  
1. Active driving mode  
2. Petrol engine  
3. Electric motor(s)  
eSave function  
For the other functions, refer to the "Audio  
equipment and telematics" section.  
Hybrid  
Access to the hybrid system features  
(energy flow, consumption statistics, deferred  
charge, eSave function).  
For more information on Charging the battery  
(Hybrid), refer to the corresponding section.  
Volume adjustment/mute.  
See "Audio equipment and telematics"  
section.  
The eSave tab makes it possible to reserve all or  
part of the electrical energy of the traction battery  
for later use during a journey (e.g. driving in an  
urban area or in an area reserved for electric  
vehicles).  
► Activate the function by choosing ON then  
select the electrical energy to be reserved: 10  
km, 20 km or all of the electrical energy (MAX).  
Activation of the function is confirmed by  
the lighting up of this indicator lamp in the  
instrument panel and the display of the energy  
reserve in miles or kms.  
4. Traction battery charge level  
Energy flows have a specific colour for each type  
of driving:  
– Blue: 100% electric power.  
– Orange: power from the petrol engine.  
– Green: energy recovery.  
Consumption statistics  
The Statistics tab shows electrical energy and  
fuel consumption statistics.  
Hybrid menu  
► To use the energy reserve, choose the  
ELECTRIC driving mode in the mode selector.  
The function settings are not saved when the  
ignition is switched off.  
Energy flow  
The Flow tab presents the operation of the  
rechargeable hybrid system in real time.  
If the requested range exceeds the  
available range (not recommended), the  
internal combustion engine starts to ensure  
that the traction battery is recharged to the  
requested threshold - risk of downgraded  
performance and overconsumption of fuel!  
1. Average electrical consumption for the current  
trip (kWh/100 km) and historical values:  
– Blue bar chart: directly consumed energy  
supplied by the traction battery.  
26  
Instruments  
► Create an account.  
Upper bar  
1
► Enter the vehicle’s VIN (code beginning with  
"VF" on the vehicle registration document).  
For more information on Identification  
markings, refer to the corresponding section.  
Certain information is displayed permanently in  
the upper bar of the touch screen:  
– Time and exterior temperature (a blue warning  
lamp appears when there is a risk of ice).  
– Reminder of the air conditioning information,  
and direct access to the corresponding menu.  
– Reminder of information from the  
RadioMedia and Telephone menus and  
navigation instructions (depending on  
equipment).  
Network coverage  
In order to be able to use the various  
remotely operable features, ensure that your  
vehicle is located in an area covered by the  
mobile network.  
A lack of network coverage may prevent  
communication with the vehicle (for example,  
if it is in an underground car park). In such  
cases, the application will display a message  
indicating that the connection with the vehicle  
could not be established.  
– Notifications.  
– Access to the Settings for the touch screen  
and the digital instrument panel (date/time,  
languages, units, etc.).  
Remote features (Hybrid)  
These features are accessible  
using a smartphone, via the  
MyPeugeot application:  
– Battery charge management.  
– Temperature pre-conditioning management.  
– Consumption, charge status and driving range  
statistics.  
Installation procedure  
► Download the MyPeugeot app from the  
appropriate online store for your smartphone.  
27  

Related Topics

Digital instrument panels
Warning and indicator lamps
Indicators
Manual test
Instrument panel lighting dimmer
Trip computer
Touch screen