Get Instruments -> Indicators Guide for Peugeot 5008 SUV Second Generation (2017-2023)

Instruments

► Switch on the ignition; a temporary display

window appears and a countdown begins.

► When the display indicates =0, release the

button; the spanner disappears.

You must press the Unlock button to unlock it.

Service spanner

On temporarily when the ignition is

eSave function (Hybrid)

Fixed, accompanied by the reserved

electric range.

switched on.

Between 620 and 1,860 miles (1,000 and 3,000

km) remain before the next service is due.

Fixed, when the ignition is switched on.

The next service is due in less than 620

miles (1,000 km).

The eSave function is activated.

If you have to disconnect the battery

following this operation, lock the vehicle

and wait at least 5 minutes for the reset to be

registered.

Indicators

Have your vehicle serviced very soon.

Service indicator

The servicing information is expressed in terms

of distance (kilometres or miles) and time

(months or days).

The alert is given at whichever of these two

terms is reached ﬁrst.

The servicing information is displayed in the

instrument panel. Depending on the version of

the vehicle:

Service spanner ﬂashing

Reminder of the servicing information

You can access the servicing information at any

time.

Flashing then ﬁxed, when the

ignition is switched on.

(With BlueHDi Diesel engines, combined with the

Service warning lamp.)

The servicing interval has been exceeded.

Have your vehicle serviced as soon as possible.

► Press the trip distance recorder reset button.

The servicing information is displayed for a few

seconds, then disappears.

Resetting the service indicator

– The distance recorder display line indicates

the distance remaining before the next service

is due, or the distance travelled since it was due

preceded by the "-" sign.

– An alert message indicates the distance

remaining, as well as the period before the next

service is due or how long it is overdue.

The service indicator must be reset after each

service.

If you have serviced your vehicle yourself:

► Switch oﬀ the ignition.

Engine oil level indicator

(Depending on version.)

On versions ﬁtted with an electric gauge, the

engine oil level status is displayed on the

instrument panel for a few seconds when

the ignition is switched on, after the servicing

information, in the form of messages.

The value indicated is calculated

according to the distance covered and

the time elapsed since the last service.

The alert may also be triggered close to a

due date.

The level read will only be correct if the

vehicle is on level ground and the engine

has been oﬀ for more than 30 minutes.

► Press and hold the button located on the end

of the wiper control stalk.

Instruments

Engine coolant temperature AdBlue^®range indicators

Oil level incorrect

This is indicated by the message "Oil

level incorrect" on the instrument panel,

accompanied by the lighting of the Service

warning lamp and an audible signal.

If the low oil level is conﬁrmed by a check using

the dipstick, the level must be topped up to avoid

damage to the engine.

indicator

(BlueHDi)

The Diesel BlueHDi engines are equipped with

a system that associates the SCR (Selective

Catalytic Reduction) emissions control system

and the Diesel particle ﬁlter (DPF) for the

treatment of exhaust gases. They cannot

function without AdBlue^®ﬂuid.

For more information on Checking levels, refer

to the corresponding section.

When the level of AdBlue^®falls below the

reserve level (between 1,500 miles and 0 miles

(2,400 and 0 km)), a warning lamp lights up

when the ignition is switched on and an estimate

of the distance that can be travelled before

engine starting is prevented is displayed in the

instrument panel.

Gauge fault

This is indicated by the message "Oil level

measurement invalid" on the instrument panel.

Contact a PEUGEOT dealer or a qualiﬁed

workshop.

With the engine running:

– In zone A, the temperature is correct.

– In zone B, the temperature is too high; the

associated warning lamp and the central STOP

warning lamp come on in red on the instrument

panel, accompanied by the display of a message

and an audible signal.

You must stop the vehicle as soon as it is

safe to do so.

Wait a few minutes before switching oﬀ the

engine.

The engine starting prevention system

required by regulations is activated

automatically once the AdBlue^®tank is empty.

It is then no longer possible to start the

engine until the minimum level of AdBlue^®has

been topped up.

In the event of a fault with the electric

gauge, the oil level is no longer

monitored.

If the system is faulty, you must check the

engine oil level using the manual dipstick

located under the bonnet.

For more information on Checking levels,

refer to the corresponding section.

Manually displaying the driving range

While the driving range is greater than

1,500 miles (2,400 km), it is not displayed

automatically.

After switching oﬀ the ignition, carefully

open the bonnet and check the coolant

level.

For more information on Checking

levels, refer to the corresponding

section.

► Press this button to temporarily display the

driving range.

Instruments

If the fault is temporary, the alert

disappears during the next journey, after

self-diagnostic checks of the SCR emissions

control system.

Actions required related to a lack of

AdBlue^®

The following warning lamps light up when the

quantity of AdBlue® is lower than the reserve

level corresponding to a range of 1,500 miles

(2,400 km).

Together with the warning lamps, messages

regularly remind you of the need to top up to

avoid engine starting being prevented. Refer to

the Warning and indicator lamps section for

details of the messages displayed.

Warning/

indicator

lamps lit

Action

Remaining

range

A top-up is

vital, there is

the risk that

the engine will km and 0

be prevented

from starting.

Between 62

miles and 0

miles (100

Malfunction conﬁrmed during the

permitted driving phase (between 685

miles and 0 miles (1,100 km and 0 km))

km)

If the fault indication is still displayed

permanently after 31 miles (50 km) of driving, the

fault in the SCR system is conﬁrmed.

The AdBlue warning lamp ﬂashes, and an

"Emissions fault: Starting prevented in X miles

(km)” message is displayed, indicating the

driving range in miles or kilometres.

While driving, the message is displayed every 30

seconds. The alert is repeated when switching

on the ignition.

To be able

0 miles (km)

to restart the

engine, add at

least 5 litres of

AdBlue^®to the

tank.

For more information on AdBlue^®

(BlueHDi engines), and in particular on

topping up, refer to the corresponding section.

Warning/

indicator

lamps lit

Action

Remaining

range

Malfunction of the SCR emissions

control system

You can continue driving for up to 685 miles

(1,100 km) before the engine starting

prevention system is triggered.

Malfunction detection

Top up.

Between

1,500 miles

and 500

Have the system checked by a

PEUGEOT dealer or a qualiﬁed

workshop as soon as possible.

If a malfunction is detected,

these warning lamps come

on, accompanied by an

audible signal and an

miles (2,400

km and 800

km)

Starting prevented

"Emissions fault” message.

Top up as

soon as

possible.

Between

500 miles

and 62

miles (800

km and

Whenever the ignition is switched on, the

“Emissions fault: Starting prevented” message is

displayed.

The alert is triggered while driving, when the

fault is detected for the ﬁrst time, and thereafter

when switching on the ignition for subsequent

journeys, while the cause of the fault persists.

100 km)

Instruments

To be able to restart the engine, contact

a PEUGEOT dealer or a qualiﬁed

workshop.

are permanently displayed when the vehicle is

switched on.

ECO

Optimal use of energy (internal

combustion or electric).

The cursor is located in this zone

during electric driving phases and

during optimal usage phases of the

petrol engine, accessible with suitable

driving.

An indicator indicates the restart

threshold of the petrol engine. The

driver can therefore moderate their

acceleration to remain in electric

driving mode.

With the ignition oﬀ, opening the driver's

door activates the indicator.

Power indicator (Hybrid)

The power indicator makes it possible to know in

real time the power requested from the vehicle.

There are 3 zones:

Manual test in the

instrument panel

This function allows you, at any time, to check

certain indicators and to display the alerts log.

CHARGE Energy recovery for recharging the

traction battery.

► With the engine running, brieﬂy press this

button.

The following information is displayed on the

instrument panel:

The cursor is located in this zone

during deceleration phases: taking

your foot oﬀ the accelerator pedal or

braking.

– Engine oil level.

– Next service due.

Charge level indicator

(Hybrid)

– Driving range associated with the AdBlue and

the SCR system (BlueHDi Diesel).

– Active alerts.

POWER High power demand, using the

combined capabilities of the petrol

engine and the electric motor(s)

(depending on version).

This information is also displayed

automatically every time the ignition is

switched on.

The cursor is located in this zone

during more dynamic driving phases

when high levels of performance are

being requested.

Distance recorders

With the ignition on, the distances are

permanently indicated. They are deactivated

about 30 seconds after switching the ignition

The charge level of the traction battery and

the remaining range in electric driving mode

Instruments -> Indicators for Your Peugeot 5008 SUV Second Generation (2017-2023)

Related Topics

Instruments