2017-2023 Peugeot 5008 SUV Instruments -> Instrument panel lighting dimmer User Manual

MY CAR USER MANUAL

Instruments -> Instrument panel lighting dimmer for Your Peugeot 5008 SUV Second Generation (2017-2023)

Instruments  
► Release the button when the desired  
off. They are displayed when the driver's door  
is opened, and when the vehicle is locked or  
unlocked.  
► With the ignition on, press the button until  
zeros appear.  
1
brightness is reached.  
Version with touch screen  
Allows the instrument panel lighting to be  
switched on or off.  
It only works when the vehicle lighting is on  
(“night” mode).  
When travelling abroad, you may have to  
change the distance units (km or miles):  
the road speed must be displayed in the local  
country’s official unit (km/h or mph).  
The unit is changed via the screen  
configuration menu, with the vehicle  
stationary.  
Instrument panel lighting  
dimmer  
Version with monochrome  
screen  
Allows the brightness of the instruments and  
controls and of the instrument panel to be  
adjusted.  
► Press this button.  
The brightness of the instrument panel lighting is  
adjusted using the touch screen.  
Total distance recorder  
This recorder measures the total distance  
travelled by the vehicle since its initial  
registration.  
It only works when the vehicle lighting is on  
(“night” mode).  
With PEUGEOT Connect Radio  
► Press this button to select the  
Settings menu.  
► Select "Brightness".  
Trip distance recorder  
This recorder measures the distance travelled  
since it was last reset by the driver.  
► Adjust the brightness by pressing the  
arrows or moving the slider.  
The settings are applied immediately.  
► Press outside the settings window to exit.  
You can also switch off the screen:  
► Press this button to select the  
Settings menu.  
► Select "Dark".  
► Press this button to adjust the  
brightness.  
► When the lighting reaches the minimum/  
maximum setting, release the button, then press  
it again to increase/decrease brightness.  
The screen goes off completely.  
► Press the screen again (anywhere on its  
surface) to activate it.  
Resetting the trip recorder  
21  
Instruments  
WithPEUGEOT Connect Nav  
In all other display modes, pressing the end of  
the wiper control stalk causes this data to appear  
temporarily in a specific window.  
Definitions  
► Press this button to select the  
Settings menu.  
► Select "OPTIONS".  
Range  
(miles or km)  
Display of the different tabs  
► Select "Screen configuration".  
The distance which can still be travelled  
with the fuel remaining in the tank  
(depending on the average fuel consumption  
over the last few miles (kilometres) travelled).  
This value may vary following a change in  
the style of driving or the terrain, resulting  
in a significant change in the current fuel  
consumption.  
When the range falls below 19 miles (30 km),  
dashes are displayed.  
After filling with at least 5 litres of fuel, the range  
is recalculated and is displayed if it exceeds 62  
miles (100 km).  
► Select the "Brightness" tab.  
► Adjust the brightness by pressing the  
arrows or moving the slider.  
► Press this button to save and exit.  
You can also switch off the screen:  
► Press this button to select the  
Settings menu.  
► Press this button located on the end of the  
wiper control stalk to display the different tabs  
in turn:  
► Select "Turn off screen".  
– Current information:  
The screen goes off completely.  
► Press the screen again (anywhere on its  
surface) to activate it.  
• Total range (petrol or Diesel).  
• Total range (petrol or Diesel).  
• Stop & Start time counter (petrol or Diesel).  
• Percentage of the current journey travelled in  
all-electric driving mode (Hybrid).  
– Trips "1" then "2":  
• Average speed.  
• Average fuel consumption.  
• Distance travelled.  
If dashes instead of figures continue to be  
displayed when driving, contact a PEUGEOT  
dealer or a qualified workshop.  
Trip computer  
Displays information related to the current trip  
(range, fuel consumption, average speed, etc.).  
Current fuel consumption  
(mpg or l/100 km or km/l)  
Calculated during the last few seconds.  
Display of data in the  
instrument panel  
Trip computer data is displayed permanently  
when the "TRIP COMPUTER" or "PERSONAL"  
display mode is selected, depending on version.  
This function is only displayed from 19 mph  
(30 km/h).  
Trip reset  
► When the desired trip is displayed,  
press the button on the end of the wiper  
control stalk for more than 2 seconds.  
Trips "1" and "2" are independent and are used  
identically.  
Average fuel consumption  
(mpg or l/100 km or km/l)  
Calculated since the last trip computer  
reset.  
22  

Related Topics

Instruments

Digital instrument panels
Warning and indicator lamps
Indicators
Manual test
Trip computer
Touch screen