2017-2023 Peugeot 5008 SUV Practical information -> Hybrid system User Manual

MY CAR USER MANUAL

Practical information -> Hybrid system for Your Peugeot 5008 SUV Second Generation (2017-2023)

Practical information  
If you have put in the wrong fuel for the  
vehicle, you must have the fuel tank  
drained and filled with the correct fuel before  
starting the engine.  
When a petrol filler nozzle is inserted into the  
fuel filler neck of a Diesel vehicle, it comes into  
contact with the flap. The system remains closed  
and prevents filling.  
7
Do not persist but introduce a Diesel type  
filler nozzle.  
The vehicle is fitted with a catalytic converter, a  
device which helps to reduce the level of harmful  
emissions in the exhaust gases.  
For petrol engines, you must use unleaded  
fuel.  
It remains possible to use a fuel jerrycan  
to fill the tank.  
The filler neck is narrower, admitting unleaded  
petrol nozzles only.  
Travelling abroad  
As Diesel fuel pump nozzles may be  
different in other countries, the presence  
of the misfuel prevention device may make  
refuelling impossible.  
Misfuel prevention (Diesel)  
(Depending on country of sale.)  
Before travelling abroad, it is advisable to  
check with a PEUGEOT dealer if the vehicle  
is suitable for the distribution equipment of the  
countries visited.  
This mechanical device prevents filling the tank  
of a Diesel vehicle with petrol.  
Located in the filler neck, the misfuel prevention  
device appears when the filler cap is removed.  
► With the vehicle unlocked, press the rear-  
central part of the filler flap to open it.  
► Take care to select the pump that delivers the  
correct fuel type for the vehicle's engine (see a  
reminder label on the inside of the filler flap).  
► Turn the filler cap to the left.  
Operation  
Hybrid system  
► Remove the filler cap and hang it on its  
carrier (on the filler flap).  
Electrical system  
The electrical system of the hybrid system is  
identified by orange cables and its elements are  
marked with this symbol:  
► Introduce the filler nozzle and push it in as  
far as possible before starting to refuel (risk of  
blowback).  
► Fill the tank.  
Do not continue past the third cut-off of the  
nozzle, as this may cause malfunctions.  
► Refit the filler cap.  
► Turn it to the right.  
► Push the filler flap to close it.  
The hybrid engine uses a voltage of  
between 240 V and 400 V. This system  
may be hot during and after switching off the  
167  
Practical information  
ignition. Observe the warning messages on  
the labels in the vehicle, especially in the flap.  
Any work on or modification to the vehicle's  
electrical system (battery, connectors, orange  
cables and components visible from inside or  
outside) is strictly prohibited due to the risk of  
serious burns or electrical shock that can lead  
to death.  
Stop as soon as it is safe to do so and switch  
off the ignition.  
Contact a PEUGEOT dealer or a qualified  
workshop without delay.  
Never allow water or dust to enter the  
connector or charging nozzle - risk of  
electrocution or fire!  
Never connect / disconnect the charging  
nozzle or cable with wet hands - risk of  
electrocution!  
In the event of exposure to a fire  
Immediately exit and evacuate all  
passengers from the vehicle. Never attempt  
to fight the fire yourself - risk of electrocution!  
You must immediately contact the emergency  
services, informing them that the incident  
involves a hybrid vehicle.  
Traction battery  
The Li-ion (Lithium-ion) traction battery stores  
the electrical energy of the vehicle. It is located  
under the rear seats.  
The range of the battery varies depending  
on the type of driving, the route, the use of  
thermal comfort equipment and the ageing of its  
components.  
In the event of a problem, always contact a  
PEUGEOT dealer or a qualified workshop.  
When washing  
Before washing the vehicle, always  
check that the charging flap is closed  
correctly.  
Never wash the vehicle while the battery is  
on charge.  
Battery ageing depends on several  
parameters, such as climatic conditions,  
mileage or charging frequency.  
This label is intended solely for use by  
firefighters and maintenance services in  
the event of any work on the vehicle.  
No other person must touch the device shown  
on this label.  
In case of damage of the battery  
It is strictly forbidden to carry out repairs  
on the vehicle yourself.  
Do not touch liquids coming from the battery  
and, in the event of skin contact with these  
products, wash abundantly with water and  
contact a doctor as soon as possible.  
High-pressure washing  
To avoid damaging electrical  
components, it is expressly prohibited to use  
high-pressure washing to clean the front  
compartment or the vehicle underbody.  
Do not use a pressure greater than 80 bar  
when washing the bodywork.  
In the event of an accident or impact  
The electrical system or the battery  
may be seriously damaged in the event of  
an accident or impact involving the vehicle  
underbody.  
Charging flap  
The charging flap is located on the rear left-hand  
side of the vehicle.  
168  
Practical information  
In case of impact, even light, against the  
charging flap, do not use it.  
Do not remove or modify the charging  
connector - risk of fire!  
7
Contact a PEUGEOT dealer or a qualified  
workshop.  
Status of light Meaning  
guides  
Charging cable  
Fixed white  
Welcome lighting when flap  
is opened.  
The battery can be charged using several types  
of cables.  
Fixed blue  
Deferred charge.  
Charging.  
The charging cable supplied with the vehicle is  
compatible with the electrical installations of the  
country of sale. If you are travelling abroad, refer  
to the following table to check the compatibility  
of local electrical installations with the charging  
cable.  
Flashing green  
Fixed green  
Fixed red  
1. Deferred charge activation button  
2. Nozzle locking indicator lamp  
Red: nozzle positioned correctly and locked  
in the connector.  
Charging finished.  
Malfunction.  
3. Charging connector  
4. Light guides  
Contact a PEUGEOT dealer or a qualified  
workshop to obtain the appropriate charging  
cable(s).  
Cable type  
Compatibility  
Specifications  
Mode 2 charging cable with integrated control  
unit  
Conventional electrical socket.  
Vehicle can be recharged overnight (6.5 hours to  
7 hours).  
Charge limited to a maximum of 8 A.  
“Green Up” type socket.  
Vehicle can be recharged in half a day (3.5 hours  
to 4 hours).  
Charge limited to a maximum of 14 A.  
169  
Practical information  
Cable type  
Compatibility  
Specifications  
Mode 3 charging cable  
Wallbox accelerated charging unit  
Vehicle can be recharged in 1.5 hours to 1.75  
hours (with 6.6 kW charger).  
Charge limited to a maximum of 32 A.  
Charging times are given for  
Refer to the charging unit user manual for the  
operating instructions.  
Fixed green: charging complete.  
information purposes only; they may  
vary according to different factors such as the  
exterior temperature or the quality of the  
electrical network. If the exterior temperature  
is below -10°C, it is recommended to connect  
the vehicle as soon as possible as the  
charging time may increase significantly.  
FAULT  
Red: anomaly; charging not permitted  
or must be stopped immediately. Check that  
everything is connected correctly and that the  
electrical system is not faulty.  
If the indicator lamp does not go off, contact a  
PEUGEOT dealer or a qualified workshop.  
Upon plugging the charging cable into a  
domestic socket, all of the indicator lamps come  
on briefly.  
Control unit  
Mode 2 charging cable with integrated  
control unit  
If no indicator lamps come on, check the  
domestic socket's circuit-breaker.  
It is essential to avoid damaging the cable  
and to keep it intact.  
– If the circuit breaker has tripped, contact a  
professional to check that your electrical system  
is suitable and carry out any necessary repairs.  
– If the circuit-breaker has not tripped, avoid  
using the charging cable and contact a  
PEUGEOT dealer or a qualified workshop.  
Recommendations on the control unit label  
In the event of damage, do not use it and  
contact a PEUGEOT dealer or a qualified  
workshop to replace it.  
POWER  
Green: electrical connection established;  
charging can begin.  
Wallbox accelerated charging unit  
(mode 3)  
Do not disassemble or modify the charging  
unit - risk of electrocution and/or fire!  
CHARGE  
Flashing green: charging in progress or  
temperature pre-conditioning activated.  
170  
Practical information  
put into standby mode, this information can  
be displayed again by unlocking the vehicle or  
opening a door.  
10. Do not unplug the plug from the wall as a  
means of stopping charging.  
11. Do not force the connector if it is locked into  
the vehicle.  
12. Immediately stop charging, by locking and  
then unlocking the vehicle using the remote  
control key, if the charging cable or wall  
socket feel burning hot to the touch.  
13. This charging cable includes components  
liable to cause electrical arcing or sparks.  
Do not expose to flammable vapours.  
14. Only use this charging cable with PEUGEOT  
vehicles.  
7
The charging progress can also be  
monitored using the MyPeugeot  
application.  
For more information on Remote features,  
please refer to the corresponding section.  
1. Refer to the handbook before use.  
2. Incorrect use of this charging cable may  
result in fire, property damage and serious  
injury or death by electrocution!  
3. Always use a correctly earthed power  
socket, protected by a 30 mA residual  
current device.  
Precautions  
Hybrid vehicles have been developed in  
accordance with the recommendations for  
maximum electromagnetic field limits established  
by the ICNIRP (International Commission  
on Non-Ionizing Radiation Protection - 1998  
Guidelines).  
15. Never plug the cable into the wall socket (or  
unplug it) with wet hands.  
4. Always use an electrical socket protected  
by a circuit-breaker appropriate for the  
electrical circuit’s current rating.  
5. The weight of the control unit must not be  
borne by the electrical socket, plug and  
cables.  
6. Never use this charging cable if it is  
defective or in any way damaged.  
7. Never attempt to repair or open this  
charging cable. It contains no repairable  
parts - replace the charging cable if it is  
damaged.  
8. Never immerse this charging cable in water.  
9. Never use this charging cable with an  
extension cable, a multi-plug socket, a  
conversion adaptor or on a damaged  
electrical socket.  
Charging the traction  
battery (Hybrid)  
For a full charge, follow the charging procedure  
without interrupting it, until it stops automatically.  
Charging can be immediate or deferred.  
The deferred charge is set via the touch  
screen or the MyPeugeot application.  
If you have a pacemaker or equivalent,  
check with a doctor about the precautions  
to be taken and respected or with the  
manufacturer of the implanted electro-medical  
device that its operation is guaranteed in an  
environment that complies with the ICNIRP  
recommendations.  
If in doubt  
For safety reasons, the engine will not  
start if the charging cable is connected to  
the vehicle connector. A warning is displayed  
in the instrument panel.  
During charging, do not remain inside or  
near the vehicle, near the charging cable or  
the charging unit, even for a short time.  
Before charging  
Depending on the context:  
Charging progress is visible in the instrument  
panel. After the instrument panel has been  
171  
Practical information  
► Have a professional check that the  
electrical system to be used complies with  
applicable standards and is compatible with  
the vehicle.  
► Have a professional electrician install  
a dedicated domestic power socket or  
accelerated charging unit (Wallbox)  
compatible with the vehicle.  
► Open the charging flap by pressing the push  
button and make sure that there are no foreign  
bodies on the charging connector.  
If this is not the case, charging has not  
started; restart the procedure ensuring that all  
connections are made properly.  
The red indicator lamp in the flap comes on to  
indicate that the nozzle is locked.  
The light guides in the flap light up in white.  
Domestic charging (mode 2)  
Accelerated charging (mode 3)  
Use the charging cable supplied with the  
vehicle.  
(During charging)  
Never work under the bonnet:  
– Some areas remain very hot, even an hour  
after charging ends - risk of burns!  
– The fan may start at any time - risk of cuts  
or strangulation!  
► Follow the instructions for use of the  
accelerated charging unit (Wallbox).  
► Remove the protective cover from the  
charging nozzle.  
► Insert the nozzle in the charging connector.  
The start of charging is confirmed by the flashing  
of the green light guides in the flap.  
If this is not the case, charging has not  
started; restart the procedure ensuring that all  
connections are made properly.  
After charging  
► First, connect the charging cable from the  
control unit to the domestic socket.  
Check that the charging flap is closed.  
Do not leave the cable connected to the  
domestic power socket - risk of short-circuit  
or electrocution in the event of contact with or  
immersion in water!  
When the connection is made, all of the indicator  
lamps on the control unit light up, then only the  
POWER indicator lamp remains on in green.  
► Remove the protective cover from the  
charging nozzle.  
The red indicator lamp in the flap comes on to  
indicate that the nozzle is locked.  
► Insert the nozzle in the charging connector.  
The start of charging is confirmed by the flashing  
of the green light guides in the flap and the  
flashing of the CHARGE indicator lamp in green  
on the control unit.  
Charging procedure  
Disconnection  
Connection  
► Before charging, check that the gear selector  
is in mode P and the ignition is off, otherwise  
charging is impossible.  
172  
Practical information  
installation be performed by a PEUGEOT  
Before disconnecting the nozzle from the  
charging connector:  
► If the vehicle is unlocked, lock it and then  
unlock it.  
► If the vehicle is locked, unlock it.  
The red indicator lamp in the flap goes out to  
confirm that the charging nozzle is unlocked.  
► Within 30 seconds, remove the charging  
nozzle.  
Settings  
► In the Hybrid touch screen menu,  
select the Charge tab.  
► Set the charging start time.  
7
dealer or a qualified workshop.  
If not fitted by a PEUGEOT dealer, it must  
still be fitted in accordance with the vehicle  
manufacturer's instructions.  
► Press OK.  
Important: with a motorised tailgate and its  
"Hands-Free Tailgate Access" function, if a  
towing device is fitted outside the PEUGEOT  
dealer network, it is essential to visit a  
PEUGEOT dealer or a qualified workshop  
to recalibrate the detection system - risk of  
"Hands-Free Tailgate Access" function failure.  
Certain driving or manoeuvring aid functions  
are automatically deactivated if an approved  
towing system is used.  
The setting is saved in the system.  
You can also programme the deferred  
charging function using a smartphone, via  
the MyPeugeot application.  
For more information on Remotely operable  
features, refer to the corresponding section.  
Domestic charging (mode 2)  
The end of charging is confirmed by the fixed  
lighting of the green CHARGE indicator lamp on  
the control unit and by the fixed lighting of the  
green light guides in the flap.  
► After disconnection, remove the protective  
cover from the nozzle and close the charging  
flap.  
Activation  
► Connect the vehicle to the desired charging  
equipment.  
► Press this button in the flap within one  
minute to activate the system (confirmed  
by the light guides coming on in blue).  
Observe the maximum authorised  
towable weight, indicated on the vehicle's  
registration certificate, the manufacturer's  
label as well as in the Technical data section  
of this guide.  
Complying with the maximum authorised  
nose weight (towball) also includes the  
use of accessories (bicycle carriers, tow  
boxes, etc.).  
► Disconnect the control unit's charging cable  
from the domestic socket.  
Towing device  
Distribution of loads  
Accelerated charging (mode 3)  
The end of charging is confirmed by the  
► Distribute the load in the trailer so that the  
heaviest items are as close as possible to the  
axle, and the nose weight approaches the  
maximum permitted without exceeding it.  
Air density decreases with altitude, thus reducing  
engine performance. The maximum load which  
can be towed must be reduced by 10% per  
1,000 metres of altitude.  
accelerated charging unit (Wallbox) and by the  
fixed lighting of the green light guides in the flap.  
► After disconnection, replace the nozzle on the  
charging unit and close the charging flap.  
Observe the legislation in force in the  
country in which you are driving.  
Deferred charging  
By default, charging begins when the nozzle  
is connected. Deferred charging can be  
programmed.  
Use towing devices and their genuine  
wiring harnesses approved by  
PEUGEOT. It is recommended that the  
173  

Related Topics

Practical information

Compatibility of fuels
Refuelling
Towing device
Roof bars
Snow chains
Very cold climate screen
Bonnet
Engine compartment
Checks
AdBlue
Free-wheeling