In the event of a breakdown
► Tilt the access flap by pulling out the 2
fixing lugs C and the side centring pin of the
bumper.
1.
2.
3.
4.
5.
Direction indicators (LED)
Brake lamps (LED)
Sidelamps (LED)
Foglamps (P21W)
Reversing lamps (P21W)
Rear lamps
Model with LED lamps
► Turn the bulb holder a quarter turn and
remove it.
► Turn the bulb a quarter turn and replace it.
Reversing lamps/Foglamps
For easier access to the foglamp holder,
first remove the reversing lamp holder.
When refitting the access flap, insert the 2
fixing lugs C and the side centring pin into the
bumper, before clipping the 2 side hooks B.
When changing the bulb within a few
minutes of switching off the ignition, take
care not to touch the exhaust - risk of burns!
Fuses
Model with Full LED 3D
lamps
Changing a fuse
All work must be carried out only by a
PEUGEOT dealer or a qualified workshop.
The replacement of a fuse by a third party
could cause a serious malfunction of the
vehicle.
Installing electrical accessories
The vehicle's electrical system is designed
to operate with standard or optional
equipment.
Before fitting other electrical equipment
or accessories to your vehicle, contact a
PEUGEOT dealer or a qualified workshop.
These bulbs are replaced from inside the rear
bumper.
► Remove the 2 fixing screws A from the
access flap located under the bumper using a
Torx screwdriver.
► Press the 2 side hooks B with a flat
screwdriver to unclip the access flap.
212
English 