ACCESSES
4
THE ALARM
Setting the alarm
Switch off the ignition and get out of
the vehicle.
Set the alarm by locking or dead-
locking using the remote control
(button B indicator light flashes
once per second).
Automatic activation*
The alarm is activated automatically
two minutes after the last closing of a
door or the boot.
In order to avoid accidental triggering
of the alarm when a door or the boot
is opened, it is essential to press the
remote control opening button first.
When the alarm is triggered, the siren
sounds and the direction indicators
flash for thirty seconds.
Disarming
Unlock the vehicle with the remote
control key (button B indicator light
goes out).
The alarm remains set following each
triggering incident.
This provides two types of protection:
Note: if the alarm has been triggered
while you were away from your car, the
rapid flashing of the indicator light will
stop when you switch on the ignition.
- exterior protection, it sounds if
a door, the boot or the bonnet is
opened.
- interior protection, it sounds if the
sensors detect a variation in the air
movement inside the vehicle (break-
ing of a window or a movement
inside the vehicle).
Warning: if the alarm has
been triggered ten times in
succession, on the eleventh
time it becomes inactive.
Note: if button B flashes rapidly, the
alarm has been triggered while you
were away from your vehicle.
If you wish to lock your vehicle without
setting the alarm, use the door lock.
* According to country.
62
English 
