INSTRUMENTS AND CONTROLS
1
The distance remaining before the
next service is less than 500 miles
(1,000 km).
Each time the ignition is switched on
and for 7 seconds, the service span-
ner and the distance flash.
The service is overdue.
Service indicator zero re-set
Each time the ignition is switched on
and for 7 seconds, the symbol and the
excess distance flash.
Example: the service is overdue by
300 miles/km. The service should be
carried out very shortly.
When the ignition is switched on and
for 7 seconds, the display shows:
Example: 400 miles (900 km) remain
before the next service is due.
When switching on the ignition and for
7 seconds, the display shows:
Your PEUGEOT dealer carries out this
operation after each service.
However, if you carry out the service
yourself, the re-set procedure is as fol-
lows:
Switch off the ignition,
Press and hold the trip recorder re-
set button,
Switch on the ignition.
The display begins a countdown.
When the display shows "= 0" and the
service symbol disappears, release the
button.
7 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the service span-
ner remains lit.
This indicates that a service should be
carried out shortly. The display shows
the total and trip distances.
7 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the symbol
remains lit. The display shows the total
and trip distances.
Note: the service spanner may also
be lit if the two-year interval has been
exceeded.
Important: after this opera-
tion, if you wish to disconnect
the battery, lock the vehicle
and wait for at least five min-
utes, otherwise the zero re-set will not
be registered.
31
English 
