1999-2010 Peugeot 607 4 Door Instruments and controls -> Trip computer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Trip computer for Your Peugeot 607 4 Door First Generation (1999-2010)

INSTRUMENTS AND CONTROLS  
1
TRIP COMPUTER  
Colour screen C  
Colour and map screen DT  
- the "vehicle" tab with:  
• the range, the current consumption  
and the distance remaining to be  
travelled,  
- tab "1" (route 1) with:  
• the average speed, the aver-  
and  
- the "Current info" with:  
• the range, the current consumption  
and the distance remaining to be  
travelled,  
age  
consumption  
the  
distance travelled calculated over  
route "1",  
- tab "2" (route 2) with the same char-  
Each press on the button, located at  
the end of the wipers stalk, displays  
different trip computer data in  
succession, depending on the multi-  
function display:  
- "Route 1" with:  
acteristics for a second route.  
• the  
distance  
travelled,  
the  
average consumption and the  
average speed calculated over  
route "1",  
- "Route 2" with the same character-  
istics for a second route.  
33  
INSTRUMENTS AND CONTROLS  
1
Range (km or miles)  
Distance travelled  
(km or miles)  
This indicates the distance travelled  
since the computer was last set to  
zero.  
The routes  
This shows the distance that can still  
be covered with the fuel remaining in  
the tank in accordance with the aver-  
age consumption over the last few  
miles (kilometres).  
This figure may increase if there is a  
change in the style of driving or the  
road surface, producing a significant  
drop in current consumption.  
When the range is less than 30 miles  
(50 km), four dashes are displayed.  
After filling with fuel, the range is  
displayed when it exceeds 62 miles  
(100 km).  
Distance remaining to be  
travelled (km or miles)  
This is the distance remaining to be  
travelled to the final destination. It is  
either calculated by the navigation sys-  
tem if guidance is activated or entered  
by the user.  
If the distance is not entered, dashes  
are displayed in place of the digits.  
If dashes are displayed for long  
periods instead of digits, contact a  
PEUGEOT dealer.  
The routes "1" and "2" are independ-  
ent but have identical application.  
Route "1" for example allows you to  
make daily calculations and route "2"  
monthly calculations.  
Average speed (km/h or mph)  
This is the average speed calculated  
since the computer was last set to  
zero (with the ignition on).  
Current consumption  
(l/100 or km/l or mpg)  
This is the average quantity of fuel con-  
sumed during the last few seconds.  
This function is displayed only when  
the vehicle is travelling at a speed  
greater than 20 mph (30 km/h).  
Zero reset  
When the required route is displayed,  
press the end of the wipers stalk for  
more than two seconds.  
Average consumption  
(l/100 or km/l or mpg)  
This is the average fuel consumption  
since the computer was last set to  
zero.  
34  
INSTRUMENTS AND CONTROLS  
1
Warnings log  
Access via the general menu  
Indication on the instrument  
panel display  
This summarises the active warning  
messages, displaying them on the  
multifunction display in succession.  
Status of the functions  
C screen  
This summarises the active or inactive  
status of the functions present on the  
vehicle.  
Inputting the distance remaining to  
be travelled  
When guidance is not activated, this  
enables you to enter an approximate  
distance to the final destination.  
The different trip computer data also  
appears on the instrument panel  
display at the same time.  
DT screen  
"TRIP" menu  
Press the "MENU" or "TRIP" button  
to gain access to the general menu.  
Select the "Trip computer" applica-  
tion using the navigator, then confirm.  
The "Trip computer" menu offers vari-  
ous options:  
- Inputting of the distance to be  
travelled,  
- Warnings log,  
- Status of the functions.  
35  

Related Topics

Popular Owner Manuals