Opening the bonnet
OPENING THE BONNET
On the inside
On the outside
Pull the release lever below the dashboard
towards you.
Raise the bonnet slightly, placing your hand
flat under the bonnet to make the operation
easier.
Push the safety catch lever to the left, then
open the bonnet fully.
To close
While holding the bonnet open, check
that the locking control A is engaged by
pressing it.
lift the bonnet slightly and pull the release
control A to release it.
lower the bonnet and release it at the end
of its travel. Check that the bonnet is fully
latched.
Before doing anything under the
bonnet, switch off the ignition with the
key to avoid any risk of injury resulting from
an automatic change to StARt mode.
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water (rain,
washing, ...) be limited.
Avoid opening the bonnet in strong winds.
English 
