Get EASE OF USE and COMFORT Guide for Peugeot Bipper Van First Generation (2007-2018)

Seats

FRONT SEATS

Head restraints

Head restraint height adjustment: to raise or

lower the head restraint, slide it by pressing

the lug.

the adjustment is correct when the upper

edge of the head restraint is level with the

top of the head.

to remove the head restraint, release the

base of the rod to press the tab and raise

the head restraint to the highest position.

to refit the head restraint, press the tab of

the lug and engage the head restraint rods

in the openings keeping them in line with the

seat back.

Never drive with the head restraints

removed. they must be in place and

adjusted correctly.

Seats

Lumbar support

Armrest

Forwards-backwards adjustment

lift the control bar and slide the seat

forwards or backwards to the required

position.

turn the control.

the driver's seat may be fitted with an

armrest on the centre console side.

Raise or lower completely the armrest to

obtain the most comfortable driving position.

Seat cushion height

Heated seat control

Seat back angle

to adjust the height of the driver's seat

cushion, pull the control upwards as many

times as necessary to raise.

Press the control.

the temperature is controlled automatically.

Pressing a second time stops operation.

turn the control to adjust the angle of the

seat back.

to lower, push the control downwards as

many times as necessary.

4

Seats

FOLDING FRONT PASSENGER SEAT

Table position

Folded position

After placing the seat back in the table

position, pull the seat's rear strap while

guiding the folded seat back forwards and

towards the floor.

Press the head restraint to place it in the

lowest position.

Push one of the controls rearwards, located

on each side of the seat back.

lower the seat back onto the seat cushion

to the table position.

Only move the seat when the rear

seats are not occupied.

Returning the seat to the sitting position

Before moving the seat backwards,

ensure that there is nothing that might

prevent the full travel of the seat, so as to

avoid the risk of of jamming the seat caused

by the presence of objects on the floor

behind the seat or rear passengers. If the

seat jams, stop the movement immediately.

Pull the seat's rear strap to unlock the seat.

lift the seat from the front and the rear

then guide it forwards to bring it to the table

position.

Push one of the controls, located on each

side of the seat back, rearwards while

pressing on the seat back, then place the

seat back in the upright position.

Press on the seat back firmly to trigger the

locking of the seat on the floor.

Adjust the head restraint using the button on

the side.

Seats

ONE-PIECE REAR BENCH SEAT

Table position

Removing the bench seat

Press the head restraint and its lug

simultaneously to place the head restraint in

the low position.

unlock the seat back by pushing the two

side controls. the red indicator becomes

visible.

After placing the bench seat in the fully

folded position, lower the transverse bar to

unlock the front feet of the seat.

lift the bench seat to detach it from its front

anchorages.

Fold the seat back onto the seat cushion.

Fully folded position

After placing the seat back in the table

position, pull the central strap to unlock the

rear feet of the seat.

lift the seat fully to secure it in the fully

folded position.

When driving, to secure the bench,

detach the red retaining strap, located

on the back of the bench seat cushion, and

fix one end to a front head restraint spindle

and the other to the side of the seat cushion.

4

Seats

Returning the bench seat to its position Returning the bench seat to the sitting Rear head restraints

position

Put the bench seat in place in its front

anchorages in the fully folded position.

Fold the bench seat to the table position,

the front and rear feet of the seat lock

automatically.

the rear head restraints can be removed

and have two positions:

4 high, position for use,

4 low, storage position.

to raise or lower a head restraint, pull it

forwards sliding it at the same time.

to remove it, place it in the high position,

push the lug and pull it forwards and

upwards.

lift the bench seat back.

take care not to trap the seat belts.

lock the seat back by pushing it fully

towards the rear. the red indicator is no

longer visible.

to refit it, engage the head restraint rods

in the holes taking care to remain in the

centreline of the seat back.

Never drive with the head restraints

removed, they must be in place and

correctly adjusted.

Seats

SPLIT REAR BENCH SEAT

Removing the bench seat

the left-hand side (2/3) or right-hand

side (1/3) of this bench seat can be folded to

adapt the load space in the boot.

After placing the bench seat in the fully

folded position, lower the corresponding

transverse bar to unlock the front feet of the

seat.

lift the bench seat to detach it from its front

anchorages.

Table position

Press the head restraint and its lug

simultaneously to place the head restraint in

the low position.

unlock the seat back by pulling the

corresponding side control towards you.

the red indicator becomes visible.

Fold the corresponding seat back onto the

seat cushion.

Fully folded position

After placing the seat back in the table

position, pull the corresponding strap to

unlock the rear feet of the seat.

lift the seat fully to secure it in the fully

folded position.

When driving, to secure the bench,

detach the red retaining strap, located

on the back of the bench seat cushion, and ﬁx

one end to a front head restraint spindle and

the other end to the side of the seat cushion.

4

Seats

Returning the bench seat to its position Returning the bench seat to the sitting

position

Put the bench seat in place in its front

lift the bench seat back.

anchorages in the fully folded position.

Fold the bench seat to the table position,

the front and rear feet of the seat lock

automatically.

take care not to trap the seat belts.

lock the seat back by pushing it fully

towards the rear. the red indicator is no

longer visible.

Repeat all of these operations for the other

part of the rear bench seat.

Ventilation

DEMISTING AND DEFROSTING

Windscreen

Manual mode

turn the control to this air

Rear screen and mirrors defrosting

the vents located at the base of the

windscreen and the side vents for the side

windows increase the effectiveness of the

demisting and defrosting. Do not obstruct

these eight vents.

the manual air conditioning includes a

pollen filter and air recirculation.

the pollen filter permits continuous and

effective filtering of dust.

Air recirculation (which can be operated by

the driver or the passenger) isolates the

passenger compartment from the exterior

atmosphere. However, this position should

only be used temporarily, you should

normally drive with the control in the exterior

air intake position.

this function only operates when

the engine is running. Pressing

this button activates the rapid

distribution setting.

For faster and more effective

demisting and defrosting of the

windscreen:

demisting/defrosting of the rear

screen and mirrors. this function switches

off automatically to prevent an excessive

consumption of energy. It switches off when

the engine is switched off. Pressing this

button switches the function off.

-

increase the air flow setting,

-

move the exterior air intake

control temporarily to air

recirculation.

Return to the exterior air intake

position as soon as possible to

allow renewal of the air in the

passenger compartment.

4

Ventilation

VENTILATION

Recommended interior settings

Heating or Manual air conditioning

I require...

Air recirculation/

Intake of exterior air

Air distribution

Air flow

Temperature

Manual AC

HOT

COLD

DEMISTING

DEFROSTING

Ventilation

CORRECT USE OF THE AIR

CONDITIONING

In order to be effective, the air conditioning

should only be used with the windows

closed. However, if the interior temperature

is high after a prolonged period parked

in the sun, first ventilate the passenger

compartment for a few minutes.

For even air distribution, ensure that the

exterior air intake grille located at the base

of the windscreen is not obstructed and that

the side and central vents, the air outlets on

the ﬂoor and the air extractor at the rear are

open.

Operate the air conditioning system for

5 to 10 minutes, once or twice a month,

to keep it in perfect working order.

VENTS

For optimum distribution and diffusion of hot

or cool air in the passenger compartment,

there are:

Have the filter elements (air filter and

passenger compartment filter) replaced

regularly. If you drive in a dusty environment,

have them replaced twice as often.

It is normal that the condensation created by

the air conditioning system results in a flow

of water which may form a puddle under the

vehicle when parked.

-

2 adjustable central vents,

2 adjustable and closing side vents,

2 vents directed towards the floor of the

vehicle.

If the system does not produce cold air, do

not use it and contact a PeugeOt dealer or

a qualified workshop.

the air conditioning is useful in all seasons

as it eliminates condensation and air

humidity.

4

Ventilation

Air flow

the air flow fan setting varies

from 1 to the strongest 4. Adjust

this control in order to reach the

desired level of comfort. to switch

off the fan, place the control in position 0.

Air distribution

the air distribution is varied

by turning the control turned

towards:

the side vents and the central

vents,

these controls are located on the centre console.

the side vents, the central vents

and the footwells,

Air conditioning

Temperature adjustment

the air conditioning mode is operational

when the engine is running. the leD is on.

Control positioned:

the footwells,

-

in the blue zone delivers cool

air,

Press the air flow fan control. the

leD comes on.

the air flow fan control must not

be in position 0 (zero flow) for air

conditioning to be obtained.

-

in the red zone delivers

heating of the interior air.

the windscreen, the front side

windows and the footwells,

turn the control to the position required.

the windscreen.

Ventilation

Intake of exterior air

this is the preferred operating

position.

Recirculation of interior air

this position should only be

temporary.

used with the air conditioning

switched on and using the

appropriate air fan setting (from 1 to 4),

recirculation enables you to obtain the

desired level of comfort with either hot or

cold settings.

Recirculation prevents exterior odours

and smoke from entering the passenger

compartment. Defrosting is faster in this

position.

Once the required level of comfort has been

reached, return to the intake of exterior air

position to permit renewal of the air in the

passenger compartment and demisting. this

is the preferred operating position.

4

Practical information

FRONT FITTINGS

Smoker's kit

located at the base of the centre console,

this consists of a cigarette lighter and an

ashtray.

Folding writing table

(Light van)

this is located in the centre of the

dashboard. In the absence of a table, the

vehicle is fitted with a storage compartment.

the clip can be used to secure A5 format

documents, slips, etc.

Door pockets

With recess for storing a 1 litre bottle.

12 V socket (180 W max)

An accessory socket is provided next to the

cigarette lighter.

Pull the top of the table to unfold it, push to

fold it.

Practical information

Glove box

Sun visor

Spectacles storage (Combi)

to open it raise the handle.

It can accommodate a laptop computer.

It provides storage for the handbook pack.

to avoid glare from ahead, fold and direct

the sun visor down.

toll cards, tickets, etc. can be slipped into

the sun visor on the driver's side.

the sun visor on the passenger's side may

be fitted with a courtesy mirror.

there is a spectacles storage compartment

on the driver's side, above the door.

to open it, unclip the cover pulling at the

centre.

4

Practical information

the torch's storage batteries recharge

automatically while driving.

An additional lamp is fitted in the middle

of the torch housing (refer to the "Interior

lighting" section).

LOAD SPACE FITTINGS

Storage pocket

A storage pocket is provided at the rear left

of the load space.

Carrying passengers in the load space

is not permitted.

Torch

Ladder type vertical partition

Stowing rings

A magnetic torch is provided at the rear right

of the load space.

Remove the torch from its base by

pressing the button then pivoting the torch

downwards by 90 degrees.

to switch on the torch, slide the switch

forwards.

to change the 4 rechargeable batteries

(NiMH type), remove the protective cover

from the torch.

Behind the driver's seat, a ladder type

vertical partition protects the driver against

the risk of load movement.

there are 6 stowing rings on the rear floor to

secure your loads.

As a safety precaution in case of sharp

braking, you are advised to place

heavy objects as far forwards towards the

driver's seat as possible.

Partitions

Panel, glazed, mid-height panel with grille

and modular vertical grille type partitions are

available for your light van.

It is advisable to immobilise the load

by securing it firmly using the stowing

rings on the floor.

to put the torch back in place, engage

it in the notches on the base and pivot it

upwards.

Practical information

Modular vertical grille

A two-part partition grille is available.

Associated with the folding front passenger

seat, the grille increases the driver's safety

by separating them from the front load.

Operations:

1. Place the passenger seat in the folded

3. lift the catch, located at the lower part of

position.

the grille.

2. lift the catch, located at the upper part of

4. Pivot the grille and insert the catch in the

space provided on the passenger seat

back.

the grille.

4

Practical information

Rear shelf

unfold the shelf to conceal the contents of

the boot from view.

Fold the shelf back on itself for easier

access to the contents of the boot.

Stow the shelf behind the rear bench seat

when loading bulky items vertically.

Removing the shelf

Fold the shelf back on itself.

Lift the shelf to approximately 60°.

unclip the shelf's side fixings from its

supports.

Remove the shelf.

Stow the folded shelf in the location behind

the rear bench seat.

REAR FITTINGS

Stowing rings

there are 4 stowing rings on the rear floor to

secure your luggage.

Luggage retaining net

to refit the shelf, carry out these operations

in reverse order.

Hooked onto the stowing rings, this enables

you to secure your luggage.

Practical information

Retaining straps

Torch

there are two retaining straps on the left-

hand side of the boot.

A magnetic torch is provided on the right-

hand side of the boot.

they secure the tool kit.

Remove the torch from its base by

pressing the button then pivoting the torch

downwards by 90 degrees.

to switch on the torch, slide the switch

forwards.

to change the 4 batteries (NiMH type),

remove the protective cover, located on the

torch.

to put the torch back in place, engage it in the

notches on the base and pivot it upwards.

the torch's batteries recharge automatically

while driving.

A boot lamp is installed in the centre of the

torch base (refer to the "Interior lighting"

section).

4

Practical information

Rear courtesy lamp

Boot lamp

this is located on the upper part of the rear

right side.

Press the side of the courtesy lamp lens to

switch it on or off.

It comes on automatically when a door is

opened (Combi).

It comes on automatically when opening

a sliding side door or the side-hinged rear

doors (light vans).

this is located in the centre of the torch

base.

the lamp operates in accordance with the

three positions of the switch below.

INTERIOR LIGHTING

Front courtesy lamp

Permanently on.

this is located in the centre of the roof.

It is switched on by:

-

tilting the lens,

opening or closing a door,

locking or unlocking the vehicle.

In this "AUTO" position, it comes

on gradually when the vehicle is

unlocked and when a rear door or

the tailgate is opened.

Good practice

It switches off automatically:

It switches off automatically, after a few

minutes, if the doors remain open, or when

the ignition is switched on.

the courtesy lamp unit may be fitted with an

alarm sensor, a microphone for the hands-

free kit and reading lamps.

-

if the switch is not pressed down,

in all cases within approximately

15 minutes if the doors remain open,

on closing the doors, after a timed period,

when the ignition is switched on,

when locking.

It switches off automatically, after a few

minutes, if a rear door or the tailgate

remains open, or when the ignition is

switched on.

-

the reading lamps have right-hand and

left-hand switches.

Permanently off.

When closing the doors, the time

before the front and rear courtesy

lamps go out may not be same.

EASE OF USE and COMFORT for Your Peugeot Bipper Van First Generation (2007-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals