Practical information
the torch's storage batteries recharge
automatically while driving.
An additional lamp is fitted in the middle
of the torch housing (refer to the "Interior
lighting" section).
LOAD SPACE FITTINGS
Storage pocket
A storage pocket is provided at the rear left
of the load space.
Carrying passengers in the load space
is not permitted.
Torch
Ladder type vertical partition
Stowing rings
A magnetic torch is provided at the rear right
of the load space.
Remove the torch from its base by
pressing the button then pivoting the torch
downwards by 90 degrees.
to switch on the torch, slide the switch
forwards.
to change the 4 rechargeable batteries
(NiMH type), remove the protective cover
from the torch.
Behind the driver's seat, a ladder type
vertical partition protects the driver against
the risk of load movement.
there are 6 stowing rings on the rear floor to
secure your loads.
As a safety precaution in case of sharp
braking, you are advised to place
heavy objects as far forwards towards the
driver's seat as possible.
Partitions
Panel, glazed, mid-height panel with grille
and modular vertical grille type partitions are
available for your light van.
It is advisable to immobilise the load
by securing it firmly using the stowing
rings on the floor.
to put the torch back in place, engage
it in the notches on the base and pivot it
upwards.