Steering mounted controls
Temporarily exceeding the
programmed speed
When the cruise control is active, it is
still possible to exceed the programmed
speed by pressing the accelerator pedal (to
overtake another vehicle for example).
Selecting the function - ON
Switching off / deactivating the
function
When the selection is set
to ON, this switches the
function on.
Changing the programmed speed while
the cruise control is in operation
Press the brake or clutch pedal or place
the dial in the OFF position, the indicator is
switched off.
You can:
If your vehicle is fitted with
this screen, a message confirms the action.
If the ESP or ASR comes into operation,
the cruise control function is deactivated
temporarily.
-
increase the speed in steps, by means
of brief presses, or continuously by
pressing and holding the control
upwards ( + sign),
Programming a speed
Accelerate to the required speed, with 4th or
5th gear engaged.
Restore - RES
Move the control upwards (+), for
approximately one second, to store this
speed.
To restore the vehicle's
programmed speed (for example
after pressing the brake or clutch
pedal), gradually return to the chosen speed
and press RES.
Release the pressure on the accelerator
pedal, the vehicle will maintain this speed.
-
decrease the speed continuously
by pressing and holding the control
downwards (- sign).
The indicator comes on, the cruise control
function is restored.
English 