Audio equipment
Bluetooth hands-free system
SYSTEM
When you switch on the audio system, you may have to enter a
code for access to its functions.
In this cases, the message "Radio Code" is displayed in the
screen, followed by 4 dashes.
The 4-number code should be entered using the buttons 1 to 6.
You have 20 seconds to enter the code.
If the wrong code is entered, the audio system gives an audible
signal and the message message "Radio blocked/wait" is
displayed. You should then start the procedure again.
INTRODUCTION
This system allows you to:
-
-
-
-
-
-
send and receive calls via the Bluetooth® connection with your
mobile telephone,
display the names of your contacts and numbers from the
directory of your mobile phone in the instrument panel screen,
use voice commands to make a call and manage your
contacts while keeping both hands on the steering wheel,
Each time an incorrect code is entered, the waiting time before
the code can be entered again increases progressively (1 minute,
2 minutes, 4 minutes, 8 minutes, 16 minutes, 30 minutes, 1 hour,
2 hours, 4 hours, 8 hours, 16 hours, 24 hours).
hear your text messages via the voice synthesiser built into
the system,
listen to MP3, WMA, AAC, M4A, MP4 and WAV audio files
from a USB storage device,
Keep your code in a safe place, never inside the
vehicle.
display information on the track being played in the radio
screen (title, artist, etc...),
-
-
control vocally a portable music player (iPod® type),
recharge your portable music player (iPod® type) via the USB
port.
TELEPHONE PRE-EQUIPMENT
If the hands-free kit is fitted to your vehicle, you can use the
audio system and the steering mounted controls to manage your
telephone calls.
During an incoming call, the audio system is deactivated, and
the message "PHONE" is displayed.
The volume can be adjusted and stored via the "EXTERNAL
AUDIO" menu.
The language of the Bluetooth system adapts automatically
by detecting the language set on your telephone.
English 