Reversing camera
Initial settings
With reverse gear not engaged,
press and hold the ON/OFF
button for approximately
3 seconds. The button flashes
twice to confirm the reinitialisation.
Good practice
When vehicle conditions are optimum
(position on the road, loading level) the
maximum area of visibility covered by the
camera has a field depth approximately 3 m
long and 5.5 m wide.
The area of visibility may vary depending on
the external weather conditions (brightness,
rain, snow, fog, ...), the load in the vehicle
and the position of the vehicle on the road.
Alarm display on the screen
In the ON position, information in text
format accompanies the manoeuvre and is
displayed on the screen:
Please store the screen in its housing when
no longer in use.
-
each time reverse gear is engaged, a
message appears before the first view is
transmitted,
When cleaning the camera and the screen,
avoid using a detergent or a tool which may
scratch the glass.
-
at 11 mph (18 km/h) in reverse gear,
the rear view disappears and the
Use a non-abrasive cloth or a small brush.
Following a collision, if the screen glass has
cracked and allows liquid crystal to flow out:
do not touch it.
screen switches to "Stand by". The view
appears again when the vehicle returns
to a speed below 9 mph (15 km/h).
If you have come into contact with it, quickly
wash the contaminated part of the body with
soapy water.
Change of language
With reverse gear not engaged, press
the ON/OFF button and any other button
simultaneously.
Contact a PEUGEOT dealer to have the
screen repaired.
Scroll through the languages by pressing
ON/OFF.
When the language has been selected, wait
approximately 3 seconds for it to be stored.
English 