Opening the bonnet
OPENING THE BONNET
On the inside
To close
On the outside
This operation must only be carried out with
the vehicle stationary and the driver's door
open.
Lower the bonnet and release it at the end of
its travel. Check that the bonnet has latched.
Push the safety catch lever located above
the grille to the right and raise the bonnet.
Pull the release lever on the side of the
dashboard towards you.
Bonnet stay
If the bonnet is not closed
correctly, this warning lamp
comes on in the instrument panel.
Unclip the stay and tilt it to insert it in the
first notch, then the second.
Before closing the bonnet, put the stay back
in its housing.
Before doing anything under the
bonnet, switch off the ignition with the
key to avoid any risk of injury resulting from
an automatic change to START mode.
7
English 