Changing a wheel
-
-
start the engine,
PUNCTURE REPAIR KIT
Procedure
insert the connector G into the nearest
power socket on the vehicle,
-
Apply the parking brake. Unscrew the
This temporary puncture repair kit is located
at the front of the passenger compartment.
tyre valve cap, remove the filling hose B
and screw the ring E onto the tyre valve,
-
switch on the compressor by placing the
switch F in position I (on),
It consists of:
-
a cartridge A, containing the sealant
fluid, equipped with:
-
inflate the tyre to a pressure of 4 bars.
To obtain a more accurate reading, you are
advised to check the pressure value on the
pressure gauge H, with the compressor off.
● a filling hose B,
● a sticker C indicating "max. 80 km/h",
which the driver must affix in full view
(on the dashboard) after repairing the
tyre,
-
-
a quick guide to use of the repair kit,
a compressor D equipped with a
pressure gauge and unions,
-
adaptors, for the inflation of various
items.
-
check that the switch F on the
compressor is in position 0 (off),
English 