Levels
To maintain the reliability of engines and
emission control systems, the use of
additives in engine oil is prohibited.
LEVELS
Changing the brake fluid
These regular maintenance operations
The brake fluid must be changed at
the intervals stated, according to the
manufacturer's servicing schedule.
will keep your vehicle in good running
order. Ask for advice at a PEUGEOT dealer
or consult the servicing booklet enclosed in
the handbook pack.
Oil change
Use fluids recommended by the
manufacturer, which fulfil DOT4 standards.
It is imperative that this is carried out at the
intervals specified and the viscosity grade of
the oil selected must fulfil the requirements
in accordance with the manufacturer's
servicing schedule. Ask for advice at at
PEUGEOT dealer.
The level must be between the MIN and
MAX marks on the reservoir.
If you have to remove/refit the engine
style cover, handle it with care to avoid
damaging the fixing clips.
If fluid has to be added frequently, this
indicates a failure which must be checked by
a PEUGEOT dealer as soon as possible.
Remove the dipstick before filling.
Oil level
Check the level after filling (never exceed
the maximum mark).
Check the level regularly and top up
between changes. The maximum
consumption is 0.5 litre per 600 miles
(1 000 km). Check the level with the vehicle
level, engine cold, using the dipstick.
Warning lamps
Screw the cap back onto the sump before
closing the bonnet.
Checking by means of the warning
lamps on the instrument panel is
described in chapter 2, refer to the
"Instruments and controls" section.
Dipstick
Viscosity selection
There are two marks on
the dipstick:
In all cases, the oil selected must meet the
manufacturer's requirements.
A= maximum
If you fill past this mark,
contact a PEUGEOT
dealer.
B= minimum
Never allow the level to fall
below this mark.
7
English 