Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

EASE OF USE AND COMFORT -> Practical information for Your Peugeot Boxer Van 2003-2013

Practical information  
Cigar lighter/12 volt socket  
Portable ashtray  
Overhead storage compartment  
Press and wait a few moments until  
the lighter pops out automatically.  
After opening, pull upwards then empty  
the ashtray into a bin.  
This is located above the sun visors.  
Maximum load: approximately 20 kg.  
When used as a socket: 180 W max.  
Practical information  
Fittings/storage compartment in the  
door trays  
Courtesy lamp  
Reading lamps  
This is a double courtesy lamp located in  
the centre of the roof. It can be activated by  
means of:  
These are controlled by the switches.  
The driver's switch controls both reading  
lamps simultaneously.  
-
the switches located on the courtesy  
lamp, with the ignition on - RUNNING  
position,  
The passenger switch controls either the  
driver's reading lamp or the passenger's  
reading lamp.  
-
-
opening or closing one of the front doors,  
locking/unlocking the vehicle.  
It switches off automatically:  
-
if the switch is not pressed to the right or  
to the left,  
-
in all cases after 15 minutes, if the doors  
remain open or when the ignition is  
switched on.  
3
Practical information  
LOAD SPACE FITTINGS  
Stowing rings  
Support for stowing rail  
12 volt socket  
Supports for securing a stowing rail are  
available above the trims, on each side of  
the vehicle.  
When used as a power socket: 180 W max.  
Eight stowing rings are provided for securing  
your loads. Six rings are located on the floor  
and two on the partition behind the cab.  
Trims  
The lower parts of the sides are fitted with  
load protection trims.  
As a safety precaution in case of sharp  
braking, you are advised to place heavy  
objects as far forwards towards the cab as  
possible.  
Practical information  
Roof box  
This is a storage compartment located in  
the load space, above the cab roof. Its  
capacity varies depending on the height of  
the van roof.  
Torch  
If provided in your vehicle.  
Ladder type vertical partition  
Behind the driver's seat, a ladder type  
vertical partition protects the driver against  
the risk of load movement.  
Step  
To make access and exit easier, your vehicle  
may be fitted with a step which unfolds when  
the sliding side door is opened.  
Courtesy lamps  
Sliding side windows  
If fitted on your vehicle, one or two courtesy  
lamps are located above the rear and side  
doors.  
Depending on the vehicle's  
equipment, the side windows of  
row 2 can be opened.  
They can be activated by:  
Squeeze the two controls then  
slide the window.  
Load retainer  
-
tilting the courtesy lamp (to the left or to  
the right),  
On the floor, behind the front seats,  
a horizontal partition protects the driver  
and front passengers against the risk of  
load movement.  
While driving, the window must be closed or  
secured in an intermediate position.  
-
opening or closing the rear or side  
doors.  
This lighting switches off automatically, after  
a few minutes, if the doors are left open.  
Glazed separation partition  
Use the control to open/close the sliding  
window of the separation partition.  
3
Mirrors and windows  
Electrical controls  
Turn the control to select the mirror zone.  
1 Driver's mirror:  
A1 - Upper mirror  
MIRRORS AND WINDOWS  
MIRRORS  
B1 - Lower mirror  
Door mirrors  
Then move the control in the direction of the  
adjustment required.  
These are divided into two zones:  
A - Upper mirror  
Rear view mirror  
2 Passenger mirror:  
A2 - Upper mirror  
B2 - Lower mirror  
B - Lower mirror  
The lever located on the lower edge moves  
the mirror into two positions.  
The mirror glass is spherical in order to  
widen the lateral field of vision. Objects  
seen in the mirror are in reality closer than  
they appear. Therefore, this must be taken  
into account in order to assess the distance  
correctly.  
Then move the control in the direction of the  
adjustment required.  
For the day position, the lever is pushed.  
For the night position to prevent dazzle, pull  
the lever towards you.  
Electric folding  
Press this control.  
The shell incorporates the direction indicator  
side repeater and the aerials, according to  
the equipment available on board (GPS,  
GSM, Radio, ...).  
Defrosting the mirrors  
Press the rear screen defrosting  
button.  
Mirrors and windows  
Automatic operation  
Press or pull control A/B, beyond the point of  
resistance: the window opens or closes fully  
when the control is released.  
Pressing the control again stops the  
movement of the window.  
The electrical functions of the electric  
windows are deactivated one minute after  
the ignition is switched off.  
Good practice  
Always remove the key from the ignition  
when leaving the vehicle, even for a short  
time.  
If the electric windows meet an obstacle  
during operation, you must reverse the  
movement of the window. To do this, press  
the control concerned.  
When the driver operates the passenger  
electric window controls, they must ensure  
that no one is preventing correct closing of  
the windows.  
You have two options:  
ELECTRIC WINDOWS  
A. Driver's electric window control  
Manual operation  
B. Passenger's electric window control  
Press or pull control A, without passing the  
point of resistance.  
The driver must ensure that the passengers  
use the electric windows correctly.  
The window stops when you release the  
control.  
Be aware of children when operating  
the windows.  
3